Electro-Voice EVOLVE50M-SB-US User manual

EVOLVE Portable Column Loudspeaker
EVOLVE50M‑SB‑EU | EVOLVE50M‑SB‑US | EVOLVE50M‑SW |
EVOLVE50‑TW | EVOLVE50‑TB
en User manual

EVOLVE Portable Column Loudspeaker Table of contents | en 3
Electro-Voice User manual 2020-12 | v01 | F.01U.393.750
Table of contents
1Safety 4
1.1 Important safety instructions 4
1.2 FCC information 6
1.3 Precautions 7
1.4 Certifications 7
1.5 Notices 8
2Short information 10
2.1 Shipping contents 10
3Description 11
4Installation 13
5Amplifier DSP 14
5.1 Amplifier DSP controls 14
5.2 System status 16
5.3 DSP control menu 17
6Mixer operation 29
6.1 Inputs 1-4, 5/6 & 7/8 29
6.2 QuickSmart Link configuration 30
7Pairing the QuickSmart Mobile application 32
8Recommended configurations 34
8.1 Stereo pair of Evolve 50M systems 34
8.2 Solo musician performance 36
9Troubleshooting 37
10 Technical data 39
10.1 Dimensions 40

4en | Safety EVOLVE Portable Column Loudspeaker
2020-12 | v01 | F.01U.393.750 User manual Electro-Voice
1 Safety
1.1 Important safety instructions
WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
OVEREXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE
AVIS: RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR.
WARNING: THE MAINS PLUG OR AC
INLET IS USED AS A DISCONNECT
DEVICE. THE DISCONNECT DEVICE
SHALL REMAIN READILY OPERABLE.
WARNING: CONNECT ONLY TO MAINS
SOCKET WITH PROTECTIVE EARTHING
CONNECTION.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) AS THERE ARE NO
USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
The asterisk within an equilateral
triangle is intended to inform the user to
necessary installation or removal
instructions regarding equipment or
hardware use relating to the system.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when unused for long periods of time.

EVOLVE Portable Column Loudspeaker Safety | en 5
Electro-Voice User manual 2020-12 | v01 | F.01U.393.750
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. No naked flame sources, such as lighted candles, should be placed on the apparatus.
16. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus should not be exposed to dripping or splashing. Objects filled
with liquids, such as vases should not be placed on apparatus.
17. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
18. Minimum 60 cm (2 ft) distances around the apparatus for sufficient ventilation.
19. The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
20. To completely disconnect AC power from this apparatus, the power supply cord must be
unplugged.
!
Warning!
Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til
stikproppens jord.
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan
Apparatet må tilkoples jordet stikkontakt
Apparaten skall anslutas till jordat uttag
!
Warning!
This product is not designed to be suspended. Do NOT use handles or any other method to
suspend the loudspeaker. Handles on Electro-Voice loudspeakers are intended to only be
used for temporary transport by people.
Items, such as fiber rope, wire rope, cables, or other types of materials cannot be used to
suspend loudspeaker from the handles.
!
Warning!
Use of non-authorized accessories or attachments with this or any Electro-Voice product is at
your own discretion. Use of non-authorized accessories or attachments can result in product
malfunction, injury, or death.
The user assumes all liability and may result in the warranty being voided.
!
Caution!
Do not attempt to move this loudspeaker system when it is fully assembled.
You may damage the system or cause personal injury.
!
Caution!
To maintain tip-over stability, do not use EVOLVE 30M 2-piece sub-pole with EVOLVE 50
column speaker array or subwoofer.
Doing so may result in damage, and/or personal injury

6en | Safety EVOLVE Portable Column Loudspeaker
2020-12 | v01 | F.01U.393.750 User manual Electro-Voice
!
Caution!
For optimal acoustics and performance, ONLY use EVOLVE 50/50M column speaker array with
the EVOLVE 50/50M subwoofer. Do not use EVOLVE 50/50M column speaker array or
subwoofer with EVOLVE 50/50M column speaker array or subwoofer.
Doing so may result in poor acoustic performance, permanent damage, and void of warranty.
1.2 FCC information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
i
Notice!
This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this product does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The device has been granted by FCC and IC, the FCC ID:ESVEVOLVE and IC:1249A -
EVOLVE50M.
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance of 20cm between
the radiator and your body.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.

EVOLVE Portable Column Loudspeaker Safety | en 7
Electro-Voice User manual 2020-12 | v01 | F.01U.393.750
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain
de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
1.3 Precautions
If an Electro-Voice loudspeaker is used outdoors on a sunny day, place the
loudspeaker in a shaded or covered area. The loudspeaker amplifiers have
protection circuits that temporarily shut the loudspeaker off when extremely
high temperatures are reached. This can happen on hot days when the
loudspeaker is in direct sunlight.
Do not use Electro-Voice loudspeakers in an environment where temperatures
are below 0°C (32°F) or exceed +35°C (95°F).
Never expose an Electro-Voice loudspeaker to rain, water, or high moisture.
Electro-Voice loudspeakers are easily capable of generating sound pressure
levels sufficient to cause permanent hearing damage to anyone within normal
coverage distance. Caution should be taken to avoid prolonged exposure to
sound pressure levels exceeding 90 dB.
1.4 Certifications
Brazil:
Após uma perturbação da rede elétrica, o EVOLVE pode entrar em estado de segurança. Neste
caso, você deve desligar e ligar o dispositivo novamente.
Mexico:
“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que
este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo
debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no
deseada”
EVOLVE 50M (RCPBOEV20-1717)
EVOLVE50M-SB-US (RCPBOEV20-1717-A5)
EVOLVE50M-SB-EU (RCPBOEV20-1717-A6)
EVOLVE50M-SW (RCPBOEV20-1717-A7)

8en | Safety EVOLVE Portable Column Loudspeaker
2020-12 | v01 | F.01U.393.750 User manual Electro-Voice
Republic of Korea:
제품명: 앰프내장형 스피커
모델명: EVOLVE50M
정격: 100-240 Vac, 50-60 Hz, 1000 W
수입업체(상호)명: 로버트보쉬코리아(유)
제조자: Bosch Security Systems, LLC.
제조연월: 별도표기
제조국: 중국
A/S: 02-702-2846
해당 무선설비는 운용 중 전파혼신 가능성이 있음
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다.
United Arab Emirates:
TRA Registered no.: ER77128/19
Dealer no.: DA45733/15
1.5 Notices
Old electrical and electronic equipment
This product and/or battery must be disposed of separately from household waste.
Dispose such equipment according to local laws and regulations, to allow their reuse
and/or recycling. This will help in conserving resources, and in protecting human
health and the environment.
Copyright and disclaimer
All rights reserved. No part of this document may be reproduced or transmitted in any form by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of the publisher. For information on getting permission for reprints and
excerpts, contact Electro-Voice.
All content including specifications, data, and illustrations in this manual are subject to change
without prior notice.
i
Notice!
Bluetooth® is available in select countries.
Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Bosch Security Systems, Inc. is under license. Other trademarks
and trade names are those of their respective owners.

EVOLVE Portable Column Loudspeaker Safety | en 9
Electro-Voice User manual 2020-12 | v01 | F.01U.393.750
For use in China: CHINA ROHS DISCLOSURE TABLE

10 en | Short information EVOLVE Portable Column Loudspeaker
2020-12 | v01 | F.01U.393.750 User manual Electro-Voice
2 Short information
The following table lists products in a family, with CTN (Commercial Type Number) and
identifying product name DESCRIPTION.
CTN Description
EVOLVE50-TB Column speaker array, pole, black
EVOLVE50M-SB-US Column speaker sub US, black
EVOLVE50M-SB-EU Column speaker sub EU, black
EVOLVE50-TW Column speaker array, pole, white
EVOLVE50M-SW Column speaker sub, US & EU, white
EVOLVE50-PL-SB Column speaker pole, short, black
EVOLVE50-PL-SW Column speaker pole, short, white
EVOLVE50-CASE Column speaker carrying case, wheels
EVOLVE50-SUBCVR Subwoofer Cover
2.1 Shipping contents
Quantity Component
1 Subwoofer
1 (2 for EVOLVE50M-SW) Power cord
1 User manual
1 Safety manual
Tab.2.1: EVOLVE50M-SB-US, EVOLVE50M-SB-EU, EVOLVE50M-SW
Quantity Component
1 Column array
1 Sub pole
1 Carry bag
Tab.2.2: EVOLVE50-TB, EVOLVE50-TW

EVOLVE Portable Column Loudspeaker Description | en 11
Electro-Voice User manual 2020-12 | v01 | F.01U.393.750
3 Description
Thank you for choosing an Electro-Voice portable column system. Please take time to consult
the manual to understand all the features built into your EV system and fully utilize its
performance capabilities.
Designed to deliver a step up in sound quality and set a new performance standard for
compact column speaker systems - EVOLVE 50M is perfect for solo musicians, small groups,
mobile entertainers and smaller venues that need an easy-to-use, highly portable and
lightweight system with extraordinary coverage and output for its size. EVOLVE 50M comes
ready to go with speaker array, symmetrical aluminum pole connectors with internal wire
assembly and magnetically assisted latching, subwoofer, and included pole/array carry case -
all designed to pack up compactly, set up and tear down quickly, look great on stage, and
withstand real-world wear and tear.
Professional-grade EV-engineered components and build quality - The full-range column array
and its eight 3.5” neodymium drivers provide room-filling ultra-wide 120° coverage via custom-
designed waveguides; array-formed 40° asymmetrical vertical coverage ensures acoustic
output is directed towards both sitting and standing audience members. The array enclosure
is constructed from a durable composite material and incorporates an ergonomic aluminum
handle. Four tuning ports are located on the rear of the enclosure for acoustic optimization. A
12” subwoofer is housed in a 15 mm wood enclosure with a high-efficiency laminar-flow vent
design, for enhanced rigidity and acoustical performance. The Class-D amplifier provides up to
1000 W of output power. The speakers are protected by a black powder-coated 18 ga. steel
grille. Combined, these components generate a genuinely stunning performance to size ratio -
an elegant form factor that looks as good as it sounds.
The most extensive feature set in its class - The EVOLVE 50M has an integrated full-function
and fully programmable eight-channel digital mixer with multiple inputs (4x XLR/TRS combo
line/mic inputs, 1x XLR/TRS stereo line input, 1x RCA, 1x 3.5 mm stereo, 1x Hi-Z instrument
input, wireless Bluetooth® Audio Input), and professional-grade preamps and mixer functions -
all designed in collaboration with the world-class mixer engineering team at Electro-Voice’s
sibling brand Dynacord. For the performing musician, Hi-Z and foot switch inputs are included
for flexible system configuration, and a range of onboard studio-quality effects (30 presets,
including chorus, delay, flange and reverb, via two FX channels) add myriad options for
finessing your sound. This reduces set-up time - and on-stage clutter - by minimizing the need
for external equipment such as a mixer and effects pedals, which also makes loading in and
out of the venue quicker. High-resolution, low-latency Bluetooth®* streaming ensures
exceptional results for music playback or accompaniment.
EVOLVE 50M features class exclusive QuickSmart Link technology. Quicksmart Link allows
users to easily create a digital audio and control link between two EVOLVE 50M systems using
a common network cable. When connected, both EVOLVE 50M systems auto configure to
allow use of both mixer inputs, and sync stereo output mix and system controls.
The next-generation Electro-Voice QuickSmart Mobile application utilizes Bluetooth® Low
Energy (BTLE) technology for the wireless configuration, control, mixing and monitoring of all
parameters of up to six EVOLVE 50M systems simultaneously, and is fully programmable. The
full-function GUI allows intuitive control of all system functions from your mobile device.
EVOLVE 50M offers simple or sophisticated operation according to your application, making
great sound easy for users of all levels.
EV’s industry-leading QuickSmart DSP interface - Allowing intuitive navigation of system
parameters via an LCD with single-knob control - as well as multiple options for signal routing
and inputs. Setup is simple via four presets (Music, Live, Speech, Club), three-band system

12 en | Description EVOLVE Portable Column Loudspeaker
2020-12 | v01 | F.01U.393.750 User manual Electro-Voice
EQ (low, mid, high), seven-band graphic EQ (in Mixer mode), five user-programmable presets
(Store and Recall settings), phantom power*, visual monitoring of limiter status, input level
control and meters, and master volume control to optimize gain structure.
*+15V phantom power is always on and available on INPUTS 1-4 XLR connectors only. TRS connector does not have phantom power. A safety circuit is employed
to prevent damage to devices not requiring phantom power (e.g. dynamic microphones, mixer outputs, etc...)

EVOLVE Portable Column Loudspeaker Installation | en 13
Electro-Voice User manual 2020-12 | v01 | F.01U.393.750
4 Installation
!
Caution!
Do not attempt to move this loudspeaker system when it is fully assembled.
You may damage the system or cause personal injury.
Assembling the loudspeaker system
To assemble the loudspeaker system, do the following:
1. Place the subwoofer on a level and stable surface.
2. Insert the pole into the subwoofer base.
The pole has magnets (A) at each end.
3. Place the column array loudspeaker system on top of the subwoofer pole.
4. The column array loudspeaker system set up is complete.
A
A
2. 3. 4.

14 en | Amplifier DSP EVOLVE Portable Column Loudspeaker
2020-12 | v01 | F.01U.393.750 User manual Electro-Voice
5 Amplifier DSP
5.1 Amplifier DSP controls
The amplifier has a combination of controls and connectors to ensure the most versatile
loudspeaker system.
Portable column system control and monitoring interface
The portable column system DSP control menu selections are available for the EVOLVE.
1 2
5
3
976
MIXER
LINE
QuickSmart
Link
8
4
1. LCD – DSP control and monitoring interface.
2. MASTER VOL – Adjusts the sound level.
DSP – Scroll through the menu and select the available choices. Push the MASTER VOL
knob to enter the DSP menu.
3. INPUT selection soft keys - Selects channels INPUT 1 through INPUT 7/8 for channel DSP
settings and individual level settings.
4. MIXER selection soft key - accesses mixer controls in DSP (e.g. Level, GEQ, effects and
signal routings).
5. INPUT 1-4, 5/6 & 7/8 - Electronically balanced INPUT 1 thru INPUT 4 for the connection of
a microphone or line level signal source. Establishing a connection is possible via TRS or
XLR-type plugs. Phantom Power (+15 V) is always enabled on INPUTS 1-4 on the XLR
connectors only. INPUT 4 includes a HI-Z input below the TRS/XLR combo plug for
connection to a high impedance instrument output via a TS plug. Stereo INPUT 5/6 for

EVOLVE Portable Column Loudspeaker Amplifier DSP | en 15
Electro-Voice User manual 2020-12 | v01 | F.01U.393.750
connection of stereo line level signals. Connection is made using either two XLR-type,
TRS, RCA, or a single 1/8th inch stereo connector. Input 7/8 is reserved for stereo
Bluetooth audio connection.
6. MIX OUT - The post-fader audio signals of INPUT 1 through INPUT 7/8 are mixed and
passed to MIX OUT. The ratio of the input signals changes when the level controls INPUT
1 - 7/8 are adjusted. This feature allows the loudspeaker to act as a basic eight-channel
mixer that can send the mix to another loudspeaker via the MIX OUT socket. The output is
configurable in the menu to provide either the Mixer Mono, Stereo left or Stereo right
signal. If QuickSmart Link is used, MIX OUT provides the same signal as the column
system.
7. AUX OUT - The AUX OUT is configurable to provide either a separate post fader audio mix
of INPUT1 - 7/8 (controlled by individual channel AUX levels adjustable in DSP) or the
main mix output signal. In the case of main mix, the full mix including effects is provided
whereas the separate aux mix comes without effects.
8. QuickSmart Link - RJ45 connector for Cat5 cable to link two EVOLVE 50M systems
together for digital audio and system control. QuickSmart Link should only be used to
connect two EVOLVE 50M systems. QuickSmart Link is not an Ethernet/LAN port and is
not compatible with network devices.
9. FOOT SWITCH - ON/OFF control of DSP user selectable audio FX.
10 11
10. MAINS IN – The device receives its power supply via the MAINS IN socket. Only the
provided power cord may be used. Connect the device only to a mains network, which
corresponds to the requirements indicated on the type plate.
11. POWER - AC switch for switching the power ON or OFF. The LCD screen lights up when
the power is turned ON, after approximately 1 second.
i
Notice!
Markings and statements on amplifier panel may vary.

16 en | Amplifier DSP EVOLVE Portable Column Loudspeaker
2020-12 | v01 | F.01U.393.750 User manual Electro-Voice
5.2 System status
Normal
1 5 6 7
432
8
9
Figure5.1: Normal system status home screen with Bluetooth® status
1. VOLUME (VOL) - Indicates the master gain of the system in dB. The range is from mute to
+10 dB, in 1 dB increments.
2. 1, 2, 3, 4, 5-6, 7-8 - VU meter displays the signal level of INPUT1 through 7/8 into the
amplifier. Input levels are independent of each other.
3. AUX - VU meter displays the signal level of the AUX output. AUX level is independent of
MAIN levels.
4. MAIN - VU meter displays the signal level of the MAIN output. MAIN level is independent
of AUX levels.
5. C - Control app; the available options are:
OFF - DISABLED
FLASHING - PAIRING MODE
SOLID - CONNECTED
6. 1 - Indicates the selected store function number. There are five user defined store
function numbers available.
7. E - Indicates the preset is not saved. When the preset is saved the E is not displayed.
8. S - Audio streaming; the available options are:
OFF - DISABLED
FLASHING - PAIRING MODE (120s)
SOLID - CONNECTED
9. FUNCTION indicator - Indicates whether the system is in MIXER or BASIC mode.
i
Notice!
Bluetooth® is available in select countries.
Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.
System protection
System protection limiters indicate when a system is exceeding recommended usage by
indicating CLIP or LIMIT on the LCD display.
CLIP
CLIP indicates the signal to the loudspeaker is too high, resulting in a clipped signal into the
loudspeaker. If CLIP is shown, reduce the input gain and/or the signal on the mixer or source
equipment.

EVOLVE Portable Column Loudspeaker Amplifier DSP | en 17
Electro-Voice User manual 2020-12 | v01 | F.01U.393.750
LIMIT
LIMIT protects the loudspeaker from short-term peaks which can cause distortion. When
LIMIT is shown on the screen the limiter is active. Reducing the output volume (MASTER VOL)
is strongly recommended when the limit indication is shown often or continuously.
5.3 DSP control menu
DSP control main menu (Basic mode)
VOLUME 0 dB (Default)
Mute, -80 dB +10 dB (1 dB)
EXIT
FUNCTION Basic
Mixer
MODE MUSIC (Default)
LIVE
SPEECH
CLUB
SYS DELAY OFF (Default) to 100 m (.1 m)
(0 ft to 328.1ft)
SUB DELAY OFF (Default), -10 m to +10 m (.1 m)
(-32.8 ft to 32.8 ft)
SUB LEVEL 0 dB (Default)
Mute, -80 dB to +10 dB (1 dB)
TREBLE 0 dB (Default)
-12 dB to +6 dB (1 dB)
MID 0 dB (Default)
-12 dB to +6 dB (1 dB)
BASS 0 dB (Default)
-12 dB to +6 dB (1 dB)
BLUETOOTH BLUETOOTH ON (Default)
OFF
CONTROL PAIR CONTROL PAIRING
AUDIO PAIR AUDIO PAIRING
LED OFF
ON (Default)
LIMIT
DISPLAY LCD DIM ON (Default)
OFF
BRIGHT 5 (Default)
1 to 10
CONTRAST 5 (Default)
1 to 10

18 en | Amplifier DSP EVOLVE Portable Column Loudspeaker
2020-12 | v01 | F.01U.393.750 User manual Electro-Voice
STORE EXIT, 1, 2, 3, 4, 5, EXIT
RECALL EXIT, 1, 2, 3, 4, 5, 6, EXIT
RESET RESET ARE YOU SURE?
NO (Default)
YES
INFO PRODUCT NAME
FIRMWARE VERSION
© 2020 Electro-Voice
EXIT
DSP control main menu (Mixer mode)
VOLUME 0 dB (Default)
Mute, -80 dB +10 dB (1 dB)
EXIT
FUNCTION Basic
Mixer
MODE MUSIC (Default)
LIVE
SPEECH
CLUB
SUB DELAY OFF (Default), -10 m to +10 m (.1 m)
(-32.8 ft to 32.8 ft)
SUB LEVEL 0 dB (Default)
Mute, -80 dB to +10 dB (1 dB)
TREBLE 0 dB (Default)
-12 dB to +6 dB (1 dB)
MID 0 dB (Default)
-12 dB to +6 dB (1 dB)
BASS 0 dB (Default)
-12 dB to +6 dB (1 dB)
BLUETOOTH BLUETOOTH ON (Default)
OFF
CONTROL PAIR CONTROL PAIRING
AUDIO PAIR AUDIO PAIRING
LED OFF
ON (Default)
LIMIT
DISPLAY LCD DIM ON (Default)

EVOLVE Portable Column Loudspeaker Amplifier DSP | en 19
Electro-Voice User manual 2020-12 | v01 | F.01U.393.750
OFF
BRIGHT 5 (Default)
1 to 10
CONTRAST 5 (Default)
1 to 10
STORE EXIT, 1, 2, 3, 4, 5, EXIT
RECALL EXIT, 1, 2, 3, 4, 5, 6, EXIT
RESET RESET ARE YOU SURE?
NO (Default)
YES
INFO PRODUCT NAME
FIRMWARE VERSION
© 2020 Electro-Voice
EXIT

20 en | Amplifier DSP EVOLVE Portable Column Loudspeaker
2020-12 | v01 | F.01U.393.750 User manual Electro-Voice
DSP control menu for Input 1-4 (Mixer mode)
LEVEL 0 dB (Default)
Mute, -80 to +10 dB (1 dB)
EXIT
INPUT PRESET FLAT
LOW CUT 80
LOW CUT 120
VOCAL MIC
VOICE FILTER
SPEECH
ACOUST GUIT
ELECTR GUIT
BASS GUITAR
PERCUSSION
LINE INPUT
More input presets available with
firmware updates.
COMP OFF, 1 to 100
TREBLE 0 dB (Default)
-12 dB to +12 dB (1 dB)
MID 0 dB (Default)
-12 dB to +12 dB (1 dB)
BASS 0 dB (Default)
-12 dB to +12 dB (1 dB)
FX1 OFF (Default)
-80dB TO +10dB (1dB)
FX2 OFF (Default)
-80dB TO +10dB (1dB)
AUX* OFF (Default)
-80dB TO +10dB (1dB)
PAN* C (Default)
10L to 10R
EXIT
DSP control menu for Input 5/6 (Mixer mode)
LEVEL 0 dB (Default)
-80 dB to +10 dB (1 dB)
EXIT
MONO OFF/ON
TREBLE 0 dB (Default)
-12 dB to +12 dB (1 dB)