ELECTROCOMPANIET Tana SL-1 User manual

QUICK START GUIDE
ver. 1.9 EN
TANA SL-1

THANK YOU FOR BUYING
Welcome to the world of Electrocompaniet! Through more than 40 years of ceaseless practice,
we learned how to combine timeless Scandinavian design and innovative thinking to give you
the purest possible experience of music and sound. EC Living, not only combines all of that into
one small package, it also embeds in itself the technologies of tomorrow, granting you access
to all your favourite Music Streaming Services at your fingertips.
PACKAGE CONTENT:
• 1pc. EC Living speaker
• 1pc. Power cable ( 220V)
• 1pc. Quick Start Guide
UNPACKING
Immediately after receiving the EC Living speaker, inspect the carton for possible damage
during shipment. The carton and packaging have been designed to provide the safest pos-
sible protection for transport of your EC Living speaker. Unpack the unit carefully. Save all
packaging materials for possible future shipments.

FIRST TIME SETUP
The first time you set up a wireless system without a screen and keyboard, may present quite
a challenge, reminding of a classic “chicken or the egg” problem. We need to be connected
to the system in order to input the Wi-Fi password, but without a wi-fi connection this is not
possible. So until the wi-fi password is set in the system, we can not communicate via Wi-Fi.
The system supports multiple ways of doing this first time setup, but in this guide we will only
describe the initial setup based on a LAN cable connection.
WiFi link
Audio link
LAN Cable

PREPARATION FOR SET UP PROCEDURE
The first time you set up of your EC LIVING TANA SL-1 Speaker & Streamer.
Download the “EC Remote” App
The free App is available at Apple
store or Google Play. Search for:
“EC remote” or “Electrocompaniet”
Connect to your router
In order to establish a Wi-Fi con-
nection you have to use a LAN
cable which connects to you local
network, or a direct cable to your
router, if you don’t have.
*Lan cable is not included. Please
use any standard RJ45 cable.
Connect the power cable
Power up the TANA SL-1 by con-
necting the power cable included
in the box. Before continuing, check
that you have a glowing “E” logo,
on top of the unit.

SET UP THROUGH THE “EC REMOTE” APP
Follow all the steps below to set up your TANA SL-1 Speaker & Streamer
Start your “EC Remote” App
As long as you have downloaded the App following the previous instruc-
tions, you will nd the App where you normally nd other Apps on your
device. The rst thing to do is to select your new TANA SL-1.
Tap ZONE BUTTON
Now select your TANA SL-1. For example the unit name can be “EC
Living 6”. If no name listed, tap the refresh icon at the top bar to rescan
for your TANA SL-1. When you nd your unit, tap on the name to start
the setup.
Begin the Initial Setup
Simply press START to begin the setup of the new EC Living system.
Select your language
Just select your language. It will send you automatically to the next screen.
Name your EC Living unit (Give your unit a zone name if you plan to expand )
You can give your TANA SL-1 any name you want. Examples of name is Livingroom,
Kitchen, Bedroom, Bathroom. Press ENTER or Return on the keyboard when you
have entered your unit name. Press Next (upper right corner) when you are done.
A Zone is the name we use for the area
this device is planned to cover. Typical
Zones is Livingroom, bedroom, kitchen etc.

SETUP 2 : STEREO SETUP CONFIGURATION
Position your speakers for STEREO setup ( figure 2).
Drag the speaker into a position from the bottom line
to LEFT or RIGHT, once it’s detected ( if you are using
a TABLET), or select the position from the pop-up menu
( if you are using a smartphone). Tap on a speaker to
play a test tone.
If speakers icons are missing, tap on SCAN to search for
it, than repeat SETUP 2 from beginning.
Press Next (upper right corner) when you are done.
* On a tablet App, TANA SL -1 speaker symbol has
a small “wireless icon“ at top corner.
PAIRING ADD-ON SPEAKER TANA L-1 FROM SETTINGS MENU
( if you bought add-on speaker later)
Go to SETTINGS -> OUTPUT SETTING -> SPEAKER CONFIGURATION.
Follow instruction from a SETUP 2.
SETUP 1: STANDALONE SPEAKER CONFIGURATION
Position your speaker for STANDALONE setup ( figure 1).
Next step is to identify your TANA SL-1 for a standalone
setup. If you are using a tablet, you will see a speaker
icon placed at the middle, tap on a speaker to play a test
tone. If speaker icon is missing, tap on a SCAN to search
for it. Drag the speaker into a place when it’s detected
( if you are using a TABLET), or select the position from the
pop-up menu ( if you are using a smartphone).
Press Next (upper right corner) when you are done.

Test of audio output
Press the button START TEST A standard “white noise” sound should be present at
all paired speakers speakers. Wait until the test sound to stop.
Press Next (upper right corner) when you are done.
Check the Internet access
The system will now check the internet connectivity. If the system nds a stable
internet connection the spinning circle will be replaced with a green mark.
Press Next (upper right corner) when you are done.
Include your music files
“Add libraries” allow you access your music stored on other devices, through the EC
Living. If your music library is big, we recommend you to do this after the initial setup .
You can do this later under the menu SETTINGS from the main menu.
Music services login
Choose your streaming service and ll in your Wimp, Tidal and/or Qobuz account
details. You can also do this later at any time in the SETTINGS from main menu. Press
Next (upper right corner) when you are done.
You are done, press FINISH to complete
You have now completed the setup of the system. For test, please select Internet
radio from main screen. Swipe left to select Top100 stations and pick a station to
test the system.

ACTIVATING A WIRELESS MODE
Enable wireless on your TANA SL-1
This step is only necessary if you want the system connected to your wireless net-
work. If you want to continue using wired mode (LAN cable), simply skip this page.
Wireless network setup:
1. Tap SETTINGS at the main menu.
2. Tap NETWORKS
3. Scroll down and find the text CONNECT TO NETWORK
4. Select your wireless network
5. Write your password, press ok. System does inform you if the pass-
word is Ok or not.
6. Remove the network cable and wait for the ZONE screen to appear on
your App. ( It may take some time, please don’t touch the screen during that process. )
7. Select your device and start use your system on Wi-Fi
If you loose connection with the system, reconnect the network cable and
check your network password carefully.

System state Led state Colour
Start-up Flashing fast, then on only for 10s Green
Scanning library Flashing slow. Will turn off when
the scanning is completed
Green
No network Solid Yellow
Updating DSP rmware Heartbeat blink pattern Yellow
Connecting to paired speakers Flashing slow Yellow
Overtemperature Flashing fast Red
Recovery Solid Red
Recovering USB Solid Green/Red
Audio clipping Flashing fast (rhytm of clipping) Red
Volume
UP
Volume
DOWN
Standby
Power indicator TANA SL-1 STATUS INDICATORS
There is a number of LEDs to indicate the
status of the system.

1.
REAR PANEL OVERVIEW
1. Reset button
2. USB Port (HDD, Memory stick)
3. TOSLINK S/PDIF digital Input ( TV, PC connection)
4. COAX S/PDIF digital Input
5. LINK Port (for the future feature extension)
6. Ethernet port (RJ45)
7. Power Socket (115 - 230V AC)
2.
3.
4.
5.
7.
6.
SUPPORTED PROTOCOLS
All audio streamers are fully wireless including the connection to add-on speakers and/or subwoofers.
They all support the protocols below:
Cloud
• Tidal
• Spotify
• Qobuz
• WiMP
• Internet Radio
Supported audio formats: All popular formats including: WAV/WAVE, MP3, AAC+, Vorbis, ALAC, FLAC,
APE, WMA, up to 192kHZ /24bit, DSD, up to DSD 128 (5.6 MHz)
Local/ Network:
• SMB
• NFS
• USB storage
• UPnP, as renderer
This list is continually expanding. This guide contains information that is subject to change
without notice. Please refer to our website for the latest updates.

TIPS AND TROUBLESHOOTING
Streaming from Apple devices
On Apple devices, it is possible to stream all audio from your iPHONE/iPAD to the
EC Living via a system called “Airplay”. This is represented by this symbol
We recommend to not use this system for Spotify, Wimp, and Tidal. Instead, use
our EC Remote App to control playback for Wimp and Tidal.
For Spotify, use Spotify connect, as represented in the Spotify App by the speaker
icon . This will allow the EC Living to stream directly from the internet, which
optimises the bandwidth, and saves battery life on your iphone/ipad.
Connecting to WiFi
We recommend that the EC Living has minimally 70% link quality, and 40 Mb/s
link speed. This can be confirmed from our App, in the Settings -> Network menu.
Higher link quality and speed is recommended for a better user experience. We
recommend a wireless AC router with WIMO technology for maximum perfor-
mance.
Resetting your system
If your system acts strangely, it can be reset to its default settings by using a paper-
clip to press the RESET button on the back ( see illustration “rear panel overview”)
The yellow led will blink a few times, after which the green led on top of the
speaker will start to blink. The unit will have restarted into the initial setup and you
can then follow the steps in this quick start guide. To fully reset the software of the
system, please go to support chapter of our electrocompaniet.no/ecliving website
and follow the instructions for software download.

MADE IN NORWAY
www.electrocompaniet.no
Warning!
To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture.
Verify line voltage before use.
Do not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personal.
The warranty is void if the product is tampered with by non-authorised personnel.
Use only authorized Electrocompaniet service center.
SERVICE AND SUPPORT
Your dealer will have all relevant information regarding the service centers in your area, and will ensure
that your unit is serviced with minimum delay. It is our general policy to have your unit returned to you
within five working days. This is an average time, and can vary locally, depending on the workload at
that particular service station. If, for some reason, there are no service facilities available in your coun-
try, please ship the unit to the following address:
Electrocompaniet as,
Breivikveien 7,
N-4120 Tau,
Norway
Web: www.electrocompaniet.no
Service and support department: www.electrocompaniet.no/Support
The end user is responsible for all shipping charges, insurance, re-importation and duty charges.
When shipping a product to the factory for service, always include the following:
1. A sales slip or other proof of purchase if repair is claimed under warranty.
2. A proforma invoice with value of goods, stating that the TANA SL-1 is returned to Norway for repair.
3. An accompanying letter describing faults, symptoms, or problems with the unit.
4. Always ship the unit in its original carton and packaging material to prevent damage in transit.
Electrocompaniet will not cover damages incurred in transit. If you require further information concern-
ing the operation of the unit, or if you have any questions related to service, please do not hesitate to
contact your dealer or your national distributor.