Electrolux ESF 6100 User manual

Lavavajillas
Dishwasher
Máquina de lavar loiça
Lavastoviglie
Manual de instrucciones (parte 2) 2
Instruction book (part 2) 7
Instruções de utilização (parte 2) 12
Libretto istruzioni (parte 2) 17
Model ESF 6100
P
I
GB
E

1. Water hardness adjustment
2. Levelling spacers
3. Upper asket stop
4. Salt container
5. Large filter
6. Detergent dispenser
7. Control panel
8. Rating plate
9. Rinse aid dispenser
10. Central filter
11. Lower spray arm
12. Upper spray arm
13. Upper asket
14. Worktop
1. On/Off indicator light
2. On/Off push button
3. Main wash temperature push
button (50 )
4. Programme guide
5. Door handle
6. Salt refilling indicator light
(See “Instruction ook” - part 1)
7. Programme selector dial
8. Programme sequence indicator
As the programmes progresses, the programme dial
turns, to show the phase in the wash programme the
appliance has reached.
Prewash /Rinse and hold
Wash
Cold rinse
Hot rinse
Drying
7
Description of the appliance
The control panel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
IN68

1. Check the filters
Ensure that they are clean and properly positioned.
(See "Maintenance and cleaning" - Instruction ook -
part 1)
2. Check that there is rinse aid and
salt
(See "Instruction ook" - part 1)
3. Load the dishes
Remove any scraps of food.
Pull the lower asket out and arrange the saucepans,
plates and cutlery in it.
Pull the upper asket out and arrange the plates,
saucers, glasses and cups etc. in it.
Slide the askets ack into the machine.
4. Ensure that the spray arms can
rotate freely
5. Measure out detergent
Add the detergent into the dispenser according to the
dosage quantity given in the "Washing programmes"
chart.
Close the detergent dispenser lid.
6. Close the dishwasher door
7. Set the programme
Turn the programme selector dial clockwise until the
letter of the programme you wish to select corresponds
with the programme marker.
If necessary select the temperature of the main wash
according to the instructions in the "Washing
programmes" chart (see "Required push uttons").
8. Start the programme
Depress the On/Off push utton.
The On/Off indicator light will come on and the machine
will start.
If you wish to interrupt the washing programme at any
time press this utton again.
9. At the end of the washing
programme
At the end of the programme the dishwasher will
automatically stop.
The On/Off indicator light remains on until the On/Off
push utton is depressed.
10. Switch off the dishwasher
Switch off the dishwasher y pressing the On/Off push
utton.
Open the door and wait a few minutes efore removing
the dishes; in this way they will e cooler and the drying
will e improved.
Empty the lower asket first and then the upper one;
this will avoid water dripping from the upper asket
onto the dishes in the lower one.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
Attention!
In general it is not advisable to open the door while the
machine is working; if the door is opened however, a
safety device ensures that the machine stops.
Important!
Care must be taken if the door is opened during the hot
phase or immediately after a programme has finished, as
steam may escape.
Operating sequence
8
Washing programmes
Programme Degree of soil
and
type of load
Required
push buttons Recommended
quantity of detergent
wash prewash
Starting position
of the
programme
selector
Normal soil.
Crockery and cutlery
Normal soil.
Crockery and cutlery
Light soil.
Crockery and party
crockery
Any.
Partial load (to e
completed later in the
day).
Cycle description
Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Active drying
Cold prewash
Main wash up to 50°C
1 cold rinse
1 hot rinse
Active drying
Main wash up to 50°C
1 cold rinse
1 hot rinse
1 cold rinse
(to avoid food scraps
from sticking
together).
*Testing programme for EN 50242. (see "Hints for test centres").
** This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that
you may re-use them promptly.
On/Off
+
50
On/Off
+
50
On/Off
On/Off
25 g 5 g
25 g 5 g
30 g /
//
A
A
B
C
*Bio 50 C
Normal 65 C
** Quick 50 C
Rinse and Hold

Loading your appliance
Before placing dishes in the machine, remove any scraps of
food, to avoid clogging the filters and consequently reducing
the performance.
Do not load very small items which can fall through the
baskets.
The lower basket
The lower asket is designed to take saucepans, lids, plates,
salad owls, cutlery etc.
Large dishes and lids should e arranged around the edge of
the asket, ensuring that the upper spray arm can turn freely.
The two rear rows of prongs on the lower asket can e easily
lowered to allow you to load pots, pans and owls.
To lower the prongs:
- Slightly pull them upwards and let them drop down (see
picture).
- To ring them ack to the standing position, just pull them
up again.
The cutlery basket
Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.
Cutlery should e placed in the remova le cutlery asket with
the handles facing downwards.
If the handles protrude from the ottom of the asket,
o structing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
Silver cutlery tends to go lack if mixed with steel cutlery.
Place it in the cutlery asket separate from the others.
For est results we recommend to use the cutlery grid
provided (if the size and the dimensions of the cutlery allow it).
The cutlery asket can e
placed either to the left or to
the right of the lower asket.
The upper basket
The upper asket is designed for plates (dessert plates,
saucers, dinner plates of up to 25 cm in diameter), salad
owls, cups and glasses.
Arrange items on and
underneath the cup racks so
that water can reach all
surfaces.
For taller items, the cup racks
can e folded upwards.
Light items (plastic owls etc.)
should e loaded in the upper
asket and arranged so they
do not move.
In case that plates are loaded in the upper basket:
load them starting from the rear
positions of the basket; tilting
them slightly forwards and
avoiding the front positions
near the door.
Before closing the door,
ensure that the spray arms
can rotate freely.
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in
diameter) you can load them in the lower asket after moving
the upper asket to the higher position.
To move to the higher position proceed as follows:
1. Move the front runner stops
(A) of the upper asket
outward and slide the
asket out.
2. Refit the asket in the
higher position and replace
the stops (A) in their
original position.
When the top basket is in
the higher position it will only take plates up to 20 cm in
diameter and you will not be able to use the cup racks.
After loading your machine always close the door, as an
open door can be a hazard.
9
Using your appliance
A
RC01
US64
US71
UI50 UI47
UI43
UI44
UI42

10
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Test standard: EN 50242
Reference programme: Bio 50°C
Load: 12 standard place settings
Rinse aid selector: position 5
Detergent dosage: 25 g in the dispenser
5 g on the dispenser lid
Dimensions Width 60 cm
Height with worktop 85 cm
Height without worktop 82 cm
Max depth 63.5 cm
Max depth with open door 115.2 cm
Electrical connection Voltage 230 V - 50 Hz
Motor rating during wash 200 W
Power of heating element 2100 W
Overall power 2300 W
Water supply pressure Minimum 50 kPa (0.5 ar)
Maximum 800 kPa (8 ar)
Water supply connection Water cold/hot max. 60°C
Capacity 12 place settings
Technical specifications
Arrangement upper asket Arrangement lower asket
Arrangement cutlery asket

Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a
close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.
Proceed as follows:
- Remove the machine’s worktop y unscrewing the
two rear retaining screws, pull from the front and
slide out the rear slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the
adjusta le feet. When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or squashed.
Levelling
Good levelling is essential for correct closure and sealing of
the door.
When the appliance is correctly levelled, the door will not catch
on the levelling spacers on either side of the ca inet.
If the door does not close correctly, loosen or tighten the
adjusta le feet until the machine is perfectly level.
Protection against flooding
In order to prevent water floods, the machine has een
provided with an additional device in the ottom of the machine
to protect against flooding.
The device will operate if there are any water leaks in the
machine, however it will only operate if the machine is on.
In case of malfunction to repair the dishwasher, turn off the
water tap and call the Service Force Centre.
11
820
570 - 600
600
IN05
The products
In order to o tain a good wash, it is necessary to use
detergents specially designed for dishwashers.
To ensure that your dishwasher functions perfectly, Zanussi
recommends using Calgonit System, a unique and complete
product, tested y millions of householders.
Calgonit System includes Calgonit detergent, rinse aid, salt,
machine detergent and Citro-Fresh.
It is a le to fulfil the main requirements for clearing oth the
crockery and the machine itself.

The Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,
cleaning and outdoor use. More than 55 million Electrolux Group products (such as
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year
to a value of approx. 14 billion USD in more than 150 countries around the world.
152976 95/1 1 12/01