Electrolux EHH8945FOG User manual

EHH8945FOG
.................................................. ...............................................
EN HOB USER MANUAL

CONTENTS
1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9. ENVIRONMENT CONCERNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed with
you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results
every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
2www.electrolux.com

1. SAFETY INFORMATION
Before the installation and use of the appli-
ance, carefully read the supplied instruc-
tions. The manufacturer is not responsible
if an incorrect installation and use causes
injuries and damages. Always keep the in-
structions with the appliance for future ref-
erence.
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury or perma-
nent disability.
• Do not let persons, children included,
with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge use the appliance. They
must have supervision or instruction for
the operation of the appliance by a per-
son who is responsible for their safety.
• Do not let children play with the appli-
ance.
• Keep all packaging away from children.
• Keep children and pets away from the
appliance when it operates or when it
cools down. Accessible parts are hot.
• If the appliance has a child safety device,
we recommend that you activate it.
1.2 Installation
WARNING!
Only a qualified person must install
this appliance.
• Remove all the packaging.
• Do not install or use a damaged appli-
ance.
• Obey the installation instruction supplied
with the appliance.
• Keep the minimum distance from the
other appliances and units.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance from
steam and moisture.
• Do not install the appliance adjacent to a
door or under a window. This prevents
hot cookware to fall from the appliance
when the door or the window is opened.
• If the appliance is installed above draw-
ers make sure that the space, between
the bottom of the appliance and the up-
per drawer, is sufficient for air circulation.
• Make sure that the ventilation space of 5
mm, between the worktop and the front
of the below unit, is free. The warranty
does not cover damages caused by the
lack of an adequate ventilation space.
• The bottom of the appliance can get hot.
We recommend to install a non-combus-
tile separation panel under the appliance
to prevent access to the bottom.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections must be made
by a qualified electrician.
• Before every wiring make sure the main
terminal of the appliance is not live.
• Make sure the appliance is installed cor-
rectly. Loose and incorrect plug and
socket can make the terminal become
too hot.
• Make sure that a shock protection is in-
stalled.
• Do not let the electricity bonds touch the
appliance or hot cookware, when you
connect the appliance to the near sock-
ets.
• Do not let the electricity bonds tangle.
• Use a strain relief clamp on cable.
• Use the correct mains cable.
• Make sure not to cause damage to the
mains plug and to the mains cable. Con-
tact the Service or an electrician to
change a damaged mains cable.
• The electrical installation must have an
isolation device which lets you discon-
nect the appliance from the mains at all
poles. The isolation device must have a
contact opening width of minimum 3
mm.
ENGLISH 3

• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contractors.
1.3 Use
WARNING!
Risk of injury, burns or electric
shock.
• Use this appliance in a household envi-
ronment.
• Do not change the specification of this
appliance.
• Do not use an external timer or a sepa-
rate remote-control system to operate
the appliance.
• Do not let the appliance stay unattended
during operation.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
• Set the cooking zone to “off” after each
use. Do not rely on the pan detector.
• Do not use the appliance as a work sur-
face or as a storage surface.
• If there is a crack on the surface, discon-
nect power supply to prevent the electri-
cal shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the in-
duction cooking zones when the appli-
ance is in operation.
WARNING!
Risk of fire or explosion.
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food rem-
nants, can cause fire at a lower tempera-
ture than oil used for the first time.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
• Do not try to extinguish a fire with water.
Disconnect the appliance and cover the
flame with a lid or a fire blanket.
WARNING!
Risk of damage to the appliance.
• Do not keep hot cookware on the con-
trol panel.
• Do not let cookware to boil dry.
• Be careful not let objects or cookware
fall on the appliance. The surface can be
damaged.
• Do not activate the cooking zones with
empty cookware or without cookware.
• Do not put aluminium foil on the appli-
ance.
• Cookware made of cast iron, aluminium
or with a damaged bottom can cause
scratches on the glass ceramic. Always
lift these objects up when you have to
move them on the cooking surface.
1.4 Care and Cleaning
WARNING!
Risk of damage to the appliance.
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
1.5 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
4www.electrolux.com

2. PRODUCT DESCRIPTION
2.1 General overview
1
4
5
210 mm
145 mm
2
3
1
Induction cooking zone
2
Induction cooking zone
3
Induction cooking zone
4
Control panel
5
Induction cooking zone
2.2 Control panel layout
3 8
101214 1113
4 6 721 5 9
Use the sensor fields to operate the appliance. The displays, indicators and
sounds tell which functions operate.
sensor field function
1
To activate and deactivate the appliance.
2
To lock/unlock the control panel.
3
To activate and deactivate the STOP+GO
function.
4
A heat setting display To show the heat setting.
5
Timer indicators of cooking
zones To show for which of the cooking zones you set the time.
6
Timer display To show the time in minutes.
7
To show that the Count Up operates (1 to
59 minutes).
8
To show that the Count Down Timer oper-
ates (1 to 99 minutes) or show that Minute
Minder operates.
9
To activate and deactivate the Bridge
function.
10
To activate and deactivate the Power
function.
ENGLISH 5

sensor field function
11
/ To increase or decrease the time.
12
To set the cooking zone for the Timer
function.
13
To set the Timer functions.
14
Control bar To set the heat setting.
2.3 Heat setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
The function operates.
The Automatic Heat Up function operates.
Power function operates.
+ digit There is a malfunction.
/ / OptiHeat Control (3 step Residual heat indicator) : continue
cook / stay warm / residual heat.
Lock/The Child Safety functions operates.
Not correct cookware or too small or no cookware on the
cooking zone.
The Automatic Switch Off function operates.
2.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
\ \ The risk of burns from
residual heat!
OptiHeat Control shows the level of the re-
sidual heat. The induction cooking zones
make the heat necessary for cooking di-
rectly in the bottom of the cookware. The
glass ceramic is hot from the heat of the
cookware.
3. DAILY USE
3.1 Activation and deactivation
Touch for 1 second to activate or deac-
tivate the appliance.
3.2 Automatic Switch Off
The function deactivates the appliance
automatically if:
•All cooking zones are deactivated ( ).
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sounds some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before you
use the appliance again, wait for the
cooking zone to cool down.
6www.electrolux.com

• You use incorrect cookware. The symbol
comes on and the cooking zone de-
activates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deacti-
vates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•, - — 6 hours
•- — 5 hours
•- — 4 hours
•- — 1.5 hours
3.3 The heat setting
Touch the control bar at the heat setting.
Change to the left or the right, if it is neces-
sary. Do not release before you have a cor-
rect heat setting. The display shows the
heat setting.
0 3 5 8 10 14 P
3.4 Bridge function
The Bridge function connects two cooking
zones and they operate as one.
First set the heat setting for one of the
cooking zone.
To activate the Bridge function touch .
To set or change the heat setting touch
one of the control sensors.
To deactivate the Bridge function touch
. The cooking zones operate independent-
ly.
When you use only one zone cooking zone
of the pair we recommend that you use the
rear cooking zone. Also when you use
large cookware we recommend that you
put it near to the rear cooking zone.
3.5 Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1.
Touch ( comes on in the dis-
play).
2.
Immediately touch the necessary heat
setting. After 3 seconds comes on
in the display.
To stop the function change the heat set-
ting.
1
2
3
4
5
6
7
8
9
10
11
12
0
1 2 3 4 5 6 7 8 9 101112 1314
3.6 Power function
The Power function makes more power
available to the induction cooking zones.
The Power function can be activated for a
limited period of time ( see Technical infor-
mation chapter). After that, the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch ,
comes on. To deactivate, change the
heat setting.
3.7 Power management
The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for
one cooking zone in the pair. The power in
the second cooking zone automatically de-
creases. The heat setting display for the re-
duced zone changes between two levels.
ENGLISH 7

3.8 The Timer
The Count Down Timer.
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Count Down Timer after the se-
lection of the cooking zone.
The selection of Timer function is
possible for cooking zones that are
active and the heat setting is set.
•To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
When this function is activated,
comes on.
•To activate the Count Down Timer:
touch of the timer to set the time (
00
-
99
minutes). When the indicator
of the cooking zone starts to flash slow,
the time counts down.
•To see the remaining time: set the
cooking zone with . The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
•To change the Count Down Timer:set
the cooking zone with touch or
.
•To deactivate the Count Down Time:
set the cooking zone with . Touch
. The remaining time counts back to
00
. The indicator of the cooking zone goes
out.
When the timer countdown comes to an
end, the sound operates and
00
flashes.
The cooking zone deactivates.
•To deactivate the sound: touch
The Count up timer
Use the Count up timer to monitor how
long the cooking zone operates.
•The selection of the cooking zone (if
more than 1 cooking zone oper-
ates) : touch again and again until
the indicator of a necessary cooking
zone comes on.
When this function is activated,
comes on.
•To activate the Count up timer:
Touch
The symbol goes out and comes
on.
•To see how long the cooking zone
operates:set the cooking zone with .
The indicator of the cooking zone starts
to flash quickly. The display shows the
time that the zone operates. The display
shows the time of the cooking zone that
operates for longer period of time.
•To deactivate the Count up timer: set
the cooking zone with and touch
or to deactivate the timer. the symbol
goes out and comes on.
When the two Timer functions op-
erate at the same time, the display
shows the Count Up Timer first.
The Minute minder.
You can use the timer as a minute minder
while the cooking zones do not operate.
Touch .
Touch or of the timer to set the time.
When the time comes to an end, the sound
operates and
00
flashes.
•To stop the sound: touch
3.9 STOP+GO
The function sets all cooking zones that
operate to the lowest heat setting ( ).
When operates, you cannot change the
heat setting.
8www.electrolux.com

The function does not stop the timer
function.
•To activate this function touch . The
symbol comes on.
•To deactivate this function touch .
The heat setting that you set before
comes on.
3.10 Lock
When the cooking zones operate, you can
lock the control panel, but not . It pre-
vents an accidental change of the heat set-
ting.
First set the heat setting.
To start this function touch . The sym-
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch . The heat
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
3.11 The child safety device
This function prevents an accidental opera-
tion of the appliance.
To activate the child safety device
•Activate the appliance with . Do not
set the heat settings.
•Touch for 4 seconds. The symbol
comes on.
•Deactivate the appliance with .
To deactivate the child safety device
•Activate the appliance with . Do not
set the heat settings. Touch for 4
seconds. The symbol comes on.
•Deactivate the appliance with .
To override the child safety device for
only one cooking time
•Activate the appliance with . The
symbol comes on.
•Touch for 4 seconds. Set the heat
setting in 10 seconds. You can oper-
ate the appliance.
• When you deactivate the appliance with
, the child safety device operates
again.
3.12 OffSound Control
(Deactivation and activation of
the sounds)
Deactivation of the sounds
Deactivate the appliance.
Touch for 3 seconds. The displays
come on and go out. Touch for 3 sec-
onds. comes on, the sound is on.
Touch , comes on, the sound is off.
When this function operates, you can hear
the sounds only when:
•you touch
• the Minute Minder comes down
• the Count Down Timer comes down
• you put something on the control panel.
Activation of the sounds
Deactivate the appliance.
Touch for 3 seconds. The displays
come on and go out. Touch for 3 sec-
onds. comes on, because the sound is
off. Touch , comes on. The sound is
on.
4. HELPFUL HINTS AND TIPS
INDUCTION COOKING ZONES
For induction cooking zones a strong elec-
tro-magnetic field creates the heat in the
cookware very quickly.
4.1 Cookware for induction
cooking zones
Use the induction cooking zones
with correct cookware.
ENGLISH 9

Cookware material
•correct: cast iron, steel, enamelled
steel, stainless steel, the bottom made of
multi-layer (with correct mark from a
manufacturer).
•not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction
hob if …
• ... some water boils very quickly on a
zone set to the highest heat setting..
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware
must be as thick and flat as possi-
ble.
4.2 Use of the cooking zones
IMPORTANT
Put the cookware on the square which is
on the surface that you cook. Cover the
square fully. The magnetic part of the bot-
tom of the cookware must be 125 mm
minimum. Induction cooking zones adapt
to the dimension of the bottom of the
cookware automatically. You can cook with
the large cookware on two cooking zones
at the same time.
4.3 The noises during operation
If you can hear
• crack noise: cookware is made of differ-
ent materials (Sandwich construction).
• whistle sound: you use one or more
cooking zones with high power levels
and the cookware is made of different
materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to appliance malfunction.
4.4 Energy saving
How to save energy
• If it is possible, always put the lids on the
cookware.
• Put cookware on a cooking zone before
you start it.
• Use the residual heat to keep the food
warm or to melt it.
The cooking zone efficiency
The cooking zone efficiency is related to
the diameter of the cookware . The cook-
ware with a smaller diameter than the mini-
mum receives only a part of the power
generated by the cooking zone. For the
minimum diameters see the Technical data
chapter.
4.5 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before
the count down timer sounds. The
difference in the operation time de-
pends on the heat setting level and
the length of the cooking operation.
4.6 The Examples of cooking
applications
The relation between the heat setting and
the cooking zone consumption of power is
not linear.
When you increase the heat setting it is not
proportional to the increase of the cooking
zone consumption of power.
It means that the cooking zone with the
medium heat setting uses less than a half
of its power.
The data in the table is for guid-
ance only.
10 www.electrolux.com

He
at
set
tin
g
Use to: Time Hints Nominal
power con-
sumption
1
Keep warm the food
you cooked as required Put a lid on a cook- ware 3 %
1 -
3Hollandaise sauce, melt: butter, chocolate,
gelatine
5 - 25 min Mix from time to time 3 – 8 %
1 -
3Solidify: fluffy omelettes, baked eggs 10 - 40 min Cook with a lid on 3 – 8 %
3 -
5Simmer rice and milk- based dishes, heating
up ready-cooked meals
25 - 50 min Add the minimum
twice as much liquid
as rice, mix milk
dishes part procedure
through
8 – 13 %
5 -
7Steam vegetables, fish, meat 20 - 45 min Add some table- spoons of liquid 13 – 18 %
7 -
9Steam potatoes 20 - 60 min Use max. ¼ l water for 750 g of potatoes 18 – 25 %
7 -
9Cook larger quantities of food, stews and
soups
60 - 150
min Up to 3 l liquid plus in- gredients 18 – 25 %
9 -
12 Gentle fry: escalope, veal cordon bleu, cut-
lets, rissoles, sausages,
liver, roux, eggs, pan-
cakes, doughnuts
as necessa-
ry Turn halfway through 25 – 45 %
12
-
13
Heavy fry, hash browns,
loin steaks, steaks 5 - 15 min Turn halfway through 45 – 64 %
14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry
chips 100 %
Boil large quantities of water. Power management is activated.
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus,
we recommend that you cook at the lowest
temperatures and do not brown food too
much.
5. CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
ENGLISH 11

Scratches or dark stains on the
glass-ceramic cause no effect on
how the appliance operates.
To remove the dirt:
•–Remove immediately: mel-
ted plastic, plastic foil, and
food with sugar. If not, the dirt
can cause damage to the ap-
pliance.
–Remove after the appliance
is sufficiently cool: limescale
rings , water rings, fat stains,
shiny metallic discolorations.
Use a special cleaning agent
for glass ceramic.
• The surface of the hob has hori-
zontal grooves. Clean the appli-
ance with a moist cloth and
some detergent with a smooth
movement from left to right.
• At the end rub the appliance
dry with a clean cloth.
6. TROUBLESHOOTING
Problem Possible Remedy
You cannot activate the
appliance or operate it. Activate the appliance again and set the heat set-
ting in less than 10 sec-
onds.
You touched 2 or more
sensor fields at the same
time.
Touch only one sensor
field.
The Stop+Go function op-
erates. Refer to the chapter “Op- erating instructions”.
There is water or fat stains
on the control panel. Clean the control panel.
An acoustic signal sounds
and the appliance deacti-
vates.
An acoustic signal sounds
when the appliance is de-
activated.
You put something on one
or more sensor fields. Remove the object from the sensor fields.
The appliance deactivates. You put something on the
sensor field .
Remove the object from
the sensor field.
12 www.electrolux.com

Problem Possible Remedy
The residual heat indicator
does not come on. The cooking zone is not hot because it operated
only for a short time.
If the cooking zone oper-
ated sufficiently long to be
hot, speak to the service
centre.
The Automatic Heat Up
function does not operate. The cooking zone is hot. Let the cooking zone be- come sufficiently cool.
The highest heat setting is
set. The highest heat setting has the same power as
the Automatic Heat Up
function.
The heat setting changes
between two levels. The Power management is activated. Refer to “Power manage- ment”.
The sensor fields become
hot. The cookware is too large or you put it too near to
the controls.
Put large cookware on the
rear cooking zones if nec-
essary.
There is no signal when
you touch the panel sen-
sor fields.
The signals are deactiva-
ted. Activate the signals (refer to “OffSound control”).
comes on. The Automatic Switch Off
operates. Deactivate the appliance and activate it again.
comes on. The Child Safety Device or
the Lock function oper-
ates.
Refer to the chapter “Op-
erating instructions”.
comes on. No cookware is on the
cooking zone. Put cookware on the cooking zone.
The cookware is incorrect. Use the correct cookware.
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone.
Use cookware with cor-
rect dimensions.
The cookware does not
cover the square. Cover the square fully.
and a number come
on.
There is an error in the ap-
pliance. Disconnect the appliance from the electrical supply
for some time. Disconnect
the fuse from the electrical
system of the house. Con-
nect it again. If comes
on again, speak to the
service centre.
comes on. The electrical connection
is incorrect. The supply
voltage is out of range.
Speak to a qualified elec-
trician to check the instal-
lation.
ENGLISH 13

Problem Possible Remedy
comes on. There is an error in the ap-
pliance because a cook-
ware boils dry. The over-
heating protection for the
cooking zones and the
Automatic Switch Off op-
erate.
Deactivate the appliance.
Remove the hot cook-
ware. After approximately
30 seconds, activate the
cooking zone again. If the
cookware was the prob-
lem, the error message
goes out of the display,
but the residual heat indi-
cator can stay. Let the
cookware become suffi-
ciently cool and refer to
“Cookware for the induc-
tion cooking zone” to see
if your cookware is com-
patible with the appliance.
The cooling fan is blocked. Check if objects block the
cooling fan. If the error
message comes on again,
speak to the service cen-
ter.
comes on. The electrical connection
is incorrect. The appliance
is connected only to one
phase.
Connect the appliance as
you see it on the connec-
tion illustration.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the customer service. Give the data from
the rating plate, three digit letter code for
the glass ceramic (it is in the corner of the
glass surface) and an error message that
comes on.
Make sure, you operated the appliance
correctly. If not the servicing by a customer
service technician or dealer will not be free
of charge, also during the warranty period.
The instructions about the customer serv-
ice and conditions of guarantee are in the
guarantee booklet.
7. INSTALLATION
WARNING!
Refer to "Safety information" chap-
ter.
Before the installation
Before the installation of the appliance, re-
cord the information below from the rating
plate. The rating plate is on the bottom of
the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................
7.1 Built-in appliances
• Only use the built-in appliances after you
assemble the appliance into correct
built-in units and work surfaces that align
to the standards.
7.2 Connection cable
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a
single phase or two phase connection.
• Replace the damaged mains cable with
a special cable (type H05BB-F Tmax
14 www.electrolux.com

90°C or higher). Speak to your local
Service Centre.
7.3 Assembly
min.
50mm
min.
50mm
min.
500mm
min.
5mm
==
R 5mm 600mm
490+1mm750+1mm
min.
25 mm
min.
5 mm
min.
20 mm
min.
38 mm
min.
5 mm
If you use a protection box (an ad-
ditional accessory
1)
), the front air-
flow space of 5 mm and protective
floor directly below the appliance
are not necessary.
You can not use the protection box
if you install the appliance above an
oven.
1) The protection box accessory may not be available in some countries. Please contact your
local supplier.
ENGLISH 15

8. TECHNICAL INFORMATION
Modell EHH8945FOG Prod.Nr. 949 596 088 00
Typ 58 GBD CD AU 220-240 V 50-60 Hz
Induction 7.4 kW Made in Germany
Ser.Nr. .......... 7.4 kW
ELECTROLUX
Cooking zones power
Cooking zone Nominal
Power (Max
heat setting)
[W]
Power Func-
tion activated
[W]
Power func-
tion maxi-
mum dura-
tion [min]
Minimum
cookware di-
ameter [mm]
Right rear 2300 W 3200 W 10 125
Right front 2300 W 3200 W 10 125
Left rear —
210 mm 2300 W 3700 W 10 180
Left front —
145 mm 1400 W 2500 W 4125
The power of the cooking zones can be dif-
ferent in some small range from the data in the table. It changes with the material and dimensions of the cookware.
9. ENVIRONMENT CONCERNS
Recycle the materials with the symbol .
Put the packaging in applicable containers
to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
and electronic appliances. Do not dispose
appliances marked with the symbol with
the household waste. Return the product
to your local recycling facility or contact
your municipal office.
16 www.electrolux.com

ENGLISH 17

18 www.electrolux.com

ENGLISH 19

www.electrolux.com/shop
892951780-B-092012