Electrolux EOC 68342 User manual

user manual
notice d'utilisation
manual de instruções
manual de instrucciones
Oven
Four
Forno
Horno
EOC 68342

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2
Product description 5
Daily use 5
Helpful hints and tips 13
Care and cleaning 14
What to do if… 17
Installation 18
Environment concerns 19
Subject to change without notice
SAFETY INFORMATION
Before the installation and use, read this
manual carefully:
• For your personal safety and the safety of
your property
• For the respect of the environment
• For the correct operation of the appliance.
Always keep these instructions with the ap-
pliance also if you move or sell it.
The manufacturer is not responsible if incor-
rect installation or use results in damage.
Children and vulnerable people safety
• Do not let persons, children included,
with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge to use the appliance.
They must have supervision or instruction
for the operation of the appliance by a per-
son who is responsible for their safety.
• Keep all packaging away from children.
There is the risk of suffocation or physical
injury.
• Keep children and animals away from the
appliance when the door is open or the
appliance is in operation. There is the risk
of injury or other permanent disability.
• If the appliance has Child lock or Key
lock function, use it. It prevents children
and animals from accidental operation of
the appliance.
General safety
• Do not change the specifications of this
appliance. There is the risk of injury and
damage to the appliance.
• Do not let the appliance stay unattended
during operation.
• Switch off the appliance after each use.
Installation
• Only an approved electrician can install
and connect the appliance. Contact an
approved service centre. This is to pre-
vent the risks of structural damage or
physical injury.
• Make sure that the appliance is not dam-
aged because of transport. Do not con-
nect a damaged appliance. If necessary,
contact the supplier.
• Remove all packaging, stickers and lay-
ers from the appliance before first use.
Do not remove the rating plate. It can in-
validate the guarantee.
• Fully obey the laws, ordinances, direc-
tives and standards in force in the coun-
try where you use the appliance (safety
regulations, recycling regulations, electri-
cal or gas safety rules etc.).
• Make sure that the appliance is discon-
nected from the power supply during the
installation.
• Be careful when you move the appliance.
The appliance is heavy. Always use safe-
ty gloves. Do not pull the appliance by
the handle.
• The electrical installation must have an iso-
lation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
•Youmusthavecorrect isolation devices:
line protecting cut-outs, fuses (screw
type fuses removed from the holder),
earth leakage trips and contactors.
• The shock protection parts must be fixed
in such a way that they cannot be un-
done without tools.
• Some parts of the appliance carry cur-
rent. Close the appliance with furniture
2 electrolux

and make sure that there are no free
spaces. It prevents electrical shock be-
cause you cannot accidentally touch dan-
gerous parts.
• Before the installation, make sure that the
kitchen cabinet has the recess dimen-
sions applicable.
• Make sure that the appliance is installed
below and adjacent safe structures.
• Keep the minimum distances to the other
appliances and units.
• Install the appliance with its back and
one side close to the higher appliance.
The other side must be close to appli-
ance with the same height.
• The appliance cannot be positioned on a
base.
• Built in ovens and built in cooking surfa-
ces are attached with special connection
system. To prevent damage to the appli-
ance, only use an appliance with the ap-
pliances from the same manufacturer.
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical data on the
rating plate agree with your domestic pow-
er supply.
• Information on the voltage is on the rating
plate.
• Always use a correctly installed shock-
proof socket.
• When you connect electrical appliances
to mains sockets, do not let cables touch
or come near the hot appliance door.
• Do not use multi-way plugs, connectors
and extension cables. There is the risk of
fire.
• Do not replace or change the mains ca-
ble. Contact the service centre.
• Make sure not to squash or cause dam-
age to the mains plug (if applicable) and
cable behind the appliance.
• Make sure that the mains connection is
accessible after the installation.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug
– if applicable.
Use
• The appliance is only for domestic use.
Do not use the appliance for commercial
and industrial use.
• Only use the appliance for domestic cook-
ing tasks. This is to prevent physical in-
jury to persons or prevent damage to
property.
• Do not use the appliance as a work sur-
face or storage surface.
• Do not put flammable products or items
that are wet with flammable products,
and/or fusible objects (made of plastic or
aluminium) in, near or on the appliance.
There is the risk of explosion or fire.
• The interior of the appliance becomes hot
during use. There is the risk of burns.
Use gloves when you insert or remove
the accessories or pots.
• Be careful when you remove or install the
accessories to prevent damage to the
oven enamel.
• Always stay away from the appliance
when you open the door while the appli-
ance is in operation. Hot steam can re-
lease. There is the risk of skin burns.
• Discoloration of the enamel has no effect
on the performance of the appliance so it
is not a defect in the sense of the warran-
ty law.
• To prevent damage or discoloration to
the enamel:
– do not put any objects directly on the
appliance floor and do not cover it with
aluminium foil;
– do not put hot water directly into the ap-
pliance;
– do not keep moist dishes and food in
the appliance after you finish the cook-
ing.
• Do not use this appliance if it is in contact
with water. Do not operate the appliance
with wet hands.
• Do not apply pressure on the open door.
• Always close the appliance door when
you cook, even while grilling.
Care and cleaning
• Before maintenance, switch off the appli-
ance and disconnect the appliance from
the power supply.
• Before maintenance, make sure that the
appliance is cold. There is the risk of
burns. There is the risk that the glass pan-
els can break.
electrolux 3

• Keep the appliance clean at all times. A
build-up of fats or other foodstuff can re-
sult in a fire.
• Regular cleaning prevents the surface ma-
terial from deteriorating
• For your personal safety and the safety of
your property, only clean the appliance
with water and a soap. Do not use flam-
mable products or products that can
cause corrosion.
• Do not clean the appliance with steam
cleaners, high-pressure cleaners, sharp
objects, abrasive cleaning agents, abra-
sive sponges and stain removers
• If you use an oven spray, follow the in-
structions from the manufacturer. Do not
spray anything on the fat filter (if applica-
ble), the heating elements and the thermo-
stat sensor.
• Do not clean the glass door with abrasive
cleaning agents or metal scraper. Heat re-
sistant surface of the inner glass can
break and shatter.
• When the door glass panels are dam-
aged they become weak and can break.
You must replace them. Contact the serv-
ice centre.
• Be careful when you remove the door
from the appliance. The door is heavy!
• Do not clean catalytic enamel (if applica-
ble).
Pyrolytic cleaning
• Do not leave the appliance unattended
during Pyrolytic cleaning.
• Do not try to open the door and do not
cut the power supply during Pyrolytic
cleaning.
• Keep children away during pyrolytic clean-
ing. The appliance becomes very hot.
There is the risk of burns.
• During pyrolytic cleaning, stubborn dirt
can cause discoloration to the enamel.
Discoloration to the enamel has no effect
on the performance of the appliance
Oven lamp
• Disconnect the appliance from the power
supply before the replacement of the
oven lamp. There is the risk of electrical
shock!
Service centre
• Only an approved engineer can repair or
work on the appliance. Contact an ap-
proved service centre.
• Use only original spare parts.
Disposal of the appliance
• To prevent the risk of physical injury or
damage
– Disconnect the appliance from the pow-
er supply.
– Cut off the mains cable and discard it.
– Discard the door catch. This prevents
children or small animals from being
closed inside of the appliance. There is
the risk of suffocation.
4 electrolux

PRODUCT DESCRIPTION
5
6
2
1
3
4
7
1Electronic programmer
2Air Vents for Cooling Fan
3Grill
4Oven lamp
5Fan
6Rating plate
7Meat probe socket
Oven accessories
•Oven shelf
For cookware, cake tins, roasts.
•Deep roasting pan
To bake and roast or as pan to collect fat.
•Meat probe
To measure how far the food is cooked.
DAILY USE
Warning! Refer to "Safety information"
chapter.
The oven door has a smooth closing
system. For the correct operation of
the smooth closing system, do not help
the door to close fully. Let the door
close automatically.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Caution! Do not use abrasive cleaning
agents! This can damage the surface.
Refer to chapter "Care and Cleaning".
First Connection
When you connect the appliance to the
mains or after the power cut you have to
set the language, display contrast, display
brightness and time of the day. Touch +or
-to set the value. Touch OK to confirm.
Preheating
1. Set function and maximum tempera-
ture.
2. Run an empty oven for 45 minutes.
electrolux 5

3.
Set function and maximum tem-
perature.
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavi-
ty surface. Accessories can become more
hot than in normal use. During this period
an odour and smoke can be emitted. This
is normal. Make sure the airflow is sufficient.
Electronic programmer
123
45
1Menu option symbol (with oven shelf lev-
el)
2Clock
3Heat indicator
4Temperature / weight
5Time functions
Panel sensor fields overview
Sensor
field Function Comment
To activate and deactivate the appli-
ance.
To show the main menu. The set function deactivates (except for the count-
down timer).
To move down and up in the menu. When a function is on:
• Touch the sensor field one time: Open the high-
er menu (function remains on). After 5 seconds
the appliance switches to the initial menu option
• Touch the sensor field two time: Change to the
higher menu and move up and down (the func-
tion deactivates)
,
To set the values (example: temper-
ature, time, weight, degree to cook). To operate the value:
• Touch the sensor field one time: The symbol flash-
es
• Touch the sensor field two time: You can set the
value
To set the values:
• Touch the sensor field one time: To set the value
in slow steps
• Hold down the sensor field: To set the value in
fast steps
To set the display to zero, when you set a
cook time or the time
•Touch+ and - at the same time.
To set the time functions, more func-
tions and Meat probe.
6 electrolux

Sensor
field Function Comment
To confirm.
Touch the sensor fields to operate the
appliance. Make sure, that you only
touch one sensor field. If you apply
your finger too flat, you could touch
more sensor fields.
Display symbols
During appliance operation display shows
various symbols.
Symbol Display (ex-
amples) Function
Minute Minder 4:30 The countdown timer is on.
Time 10:00 The display shows the time set.
Duration 1:00 Shows the time required for the cooking cycle.
End Time 14:50 The display shows the time, when the cook time is com-
pleted.
Start after
some time 0:45 The display shows the time when the appliance starts to cook. (When you use End Time and Cook Time combined).
Temperature 1.
2.
1. Indicates temperature level in the cavity. Display
shows it also after you deactivate the appliance and
the cavity is still warm.
2. Rapid heat-up is active. It reduces heat up time.
Weight 1,5 kg The display shows that automatic weight system is active
or weight can be changed.
Meat probe 75°C • The Meatprobe is installed
• The Meatprobe Automatic is on.
• You can change the core temperature.
Heat+Hold 80°C The display shows the function is active.
The menus in overview
Main menu
Sy
mb
ol Menu item Application
Assisted Cooking Contains list of automatic cooking programmes.
Heating Functions Contains list of oven heating functions.
Cleaning Menu Contains oven cleaning functions.
Basic Settings You can use it to set other oven settings.
My Programmes Contains list of favourite cooking programmes cre-
ated by user.
Submenus
Submenus for: Assisted Cooking
Sym-
bol Submenu
Pork/Veal
electrolux 7

Sym-
bol Submenu
Beef/Game/Lamb
Poultry
Fish
Cake
Pizza/Pie/Bread
Casseroles/Gratins
Convenience
Specials
Submenus for: Heating Functions
Oven function Application
Fan Cooking For baking on up to three oven levels at the same
time. Set the oven temperatures 20-40 °C lower than
when using Conventional.
Conventional Cooking For baking and roasting on one oven level
Pizza Setting For baking on one oven level dishes that require more
intensive browning and a crispy base. Set the oven
temperatures 20-40 °C lower than when using conven-
tional.
Turbo Grill For roasting larger joints of meat or poultry on one lev-
el. The function is also suitable for gratinating and
browning.
Important! Maximum temperature for th is function is
200°C
Economy Grill For grilling flat foodstufs placed in the middle of the
grill and for toasting.
Dual Grill For grilling flat foodstuffs in large quantities and for
toasting.
Bottom Heat For baking cakes with crispy or crusty bases.
Slow cook For preparing especially tender, succulent roasts.
Submenus for: Cleaning Menu
Sy
m
bo
l
Submenu Application
Pyrolytic Starts the pyrolytic cleaning procedure.
Cleaning Assistant Guides you through the cleaning process.
Cleaning Reminder Reminds you when to clean the oven.
8 electrolux

Submenus for: My Programmes
Sym-
bol Submenu
-1 - My Programmes
-2- My Programmes
-...
-Edit Program Name
Submenus for: Basic Settings
Sy
mb
ol Submenu Description
Set Time of Day Sets the current time on the clock.
Time Indication When ON, the displays shows the current time when
you deactivate the appliance.
Set + Go When ON you can choose Set+Go function in the Se-
lect Options window.
Heat + Hold When ON you can choose Heat+Hold function in the Se-
lect Options window.
Time Extension Activates and deactivates the Time Extension function.
Display Contrast Adjusts display contrast by degrees.
Display Brightness Adjusts display brightness by degrees.
Set Language Sets the language for the display.
Buzzer Volume Adjusts the volume of the touch-tones and signals by
degrees.
Key Tones Activates and deactivates the touch fields tone.
Alarm/Error Tones Activates and deactivates the alarm tones.
Service Shows the software version and configuration.
Factory Settings Reset all settings to factory settings (including My Pro-
grammes ).
Activating and deactivating the
appliance
Touch to activate or deactivate the appli-
ance.
Operation of the menus:
1. Activate the appliance.
2. Touch or to select the menu op-
tion.
3. Touch OK to move to submenu or ac-
cept setting.
At every point you can get back to the main
menu with .
Starting a heating function
1. Select Heating Functions menu. Touch
OK to confirm.
2. Select heating function. Touch OK to
confirm.
3. Set the temperature. Touch OK to con-
firm.
Switching off the heating function
Touch to cancel the procedure.
The display shows the main menu.
Setting the oven temperature
Touch +or -to set the temperature.
The appliance starts to heat.
electrolux 9

When the appliance operates at the set
temperature, an acoustic signal sounds.
Showing the oven temperature
Touch +or -at the same time.
The display shows the oven temperature.
Automatic programmes
These 3 automatic programmes give opti-
mum settings for each type of meat or oth-
er recipes:
• Meat programmes with Weight Automat-
ic ( Assisted Cooking menu)
• Meat programmes with Meatprobe Auto-
matic ( Assisted Cooking menu)
• Recipe Automatic ( Assisted Cooking
menu)
Assisted Cooking with Weight
Automatic
This function automatically calculates the
roasting time. To use the function, It is nec-
essary to input the food weight.
Activating the function:
1. Activate the appliance.
2. Select Assisted Cooking . Touch OK to
confirm.
3. Select the category and dish. Touch OK
to confirm.
4. Select the Weight Automatic . Touch
OK to confirm.
5. Touch +or - to set the food weight.
Touch OK to confirm.
The automatic program starts. You can
change the weight at any time. Touch +or
-to change the weight. When time ends,
an acoustic signal sounds. Touch a sensor
field to deactivate the signal.
With poultry programmes turn over the
food after 30 minutes. The display
shows a reminder.
Assisted Cooking with Recipe
Automatic
This appliance has a set of recipes you can
use. Recipes are fixed and you cannot
change them.
Activating the function:
1. Activate the appliance.
2. Select Assisted Cooking menu. Touch
OK to confirm.
3. Select the category and dish. Touch OK
to confirm.
4. Select the Recipe Automatic . Touch
OK to confirm.
When you set the option Manual , the
display shows automatic settings but
you can change them.
Assisted Cooking with Meatprobe
Automatic
1. Activate the appliance.
2. Touch or to set the function As-
sisted Cooking , the necessary category
and the dish.
3. Touch or to set the function
Meatprobe Automatic .
4. Touch OK to confirm.
The display shows „ Meatprobe “.
5. Install the meat probe.
When the programme ends, an acoustic
signal sounds.
Use a sensor field to deactivate the
acoustic signal.
6. Remove the meat probe.
Meatprobe
Meat probe measures the core temperature
of the meat. When the meat reaches set tem-
perature the oven deactivates automatically.
There are two temperatures to be set
• The oven temperature
• The core temperature
Important! Only use the meat probe
supplied or genuine replacement parts.
1. Activate the appliance.
2. Put the tip of the meat probe into the
centre of the meat.
3. Put the plug of the meat probe into the
socket on the side wall of the oven.
The display shows Meatprobe .
4. Touch +or -in less than 5 seconds to
set the core temperature.
5. Set the oven function and, if necessary,
the oven temperature.
The meatprobe must stay in the meat
and in the meatprobe socket during the
cooking process.
6. When the meat reaches set core temper-
ature, an acoustic signal sounds. The ap-
pliance deactivates automatically.
Use a sensor field to stop the signal.
7. Remove the meatprobe plug from the
socket and remove the meat from the
oven.
10 electrolux

Warning! The meat probe is hot! There
is the risk of burns! Be careful when
you remove the tip and plug of the
meat probe.
8. Switch off the appliance.
For meat programmes with the meatp-
robe , refer to automatic programmes .
My Programmes menu
You can store your favourite settings like du-
ration, temperature or oven function. They
are available in My Programmes menu. You
can store 20 programmes.
Storing a programme
1. Activate the appliance.
2. Select the oven function or Assisted
Cooking function.
3. Touch again and again until the
display shows " SAVE ". Touch OK to
confirm.
4. The display shows the first free memory
position.
Touch OK to confirm.
5. The first letter flashes.
Touch +or - to change the letter.
Touch OK to confirm.
6. Touch or to move the cursor to
the right or to the left. Touch OK to con-
firm.
The letter flashes.
7. Repeat steps 5 and 6 again to write
name of the program.
Touch and hold OK to save.
You can overwrite a memory position in
storage. (Refer to the section „Storing a
programme“. At step 4 touch or
to choose memory position you
want to overwrite.)
You can change the name of a Pro-
gramme in the menu ” Edit Programme
Name ”.
Activating the programme
1. Activate the appliance.
2. Select My Programmes menu. Touch
OK to confirm.
3. Select your favourite programme name.
Touch OK to confirm.
Clock functions
Symbol Function Description
Minute Minder To set a countdown (max 2 hours 30 minutes). This function
has no effect on the operation of the appliance.
Duration To set how long the appliance has to be in operation (max. 23 h
59 min).
End Time To set the switch-off time for an oven function (max. 23 h 59 min).
You can use Duration and End Time at
the same time, if the appliance is to ac-
tivated and deactivated automatically
later.
If you set the time for a clock function, the
time starts to count down after 5 seconds.
Setting the clock functions
1. Activate the appliance. Set the heating
function and, if necessary, the tempera-
ture.
2. Touch again and again until the
display shows the necessary clock func-
tion and the related symbol.
3. Touch +or - to set the necessary time.
Touch OK to confirm.
When the appliance operates at the set
time, an acoustic signal sounds. The ap-
pliance deactivates. The display shows
a message.
4. Touch a sensor field to stop the signals.
With the Minute Minder you must acti-
vate the appliance to set the clock func-
tion. You do not have to set a heating
function.
With the Duration and End Time , after
90 % of the set time, an acoustic signal
sounds. The appliance deactivates.
The appliance uses the residual heat to
continue the cooking process until the
time is completed (3-20 minutes).
When you use Meat Probe, Duration
and End Time do not work.
electrolux 11

Time Extension
The Time Extension makes the oven func-
tion continue after the set time ends.
• Applicable for all oven functions with Du-
ration or Weight Automatic .
• Not applicable for oven functions with
Meatprobe .
Activating the function:
1. When the cooking time ends, an acous-
tic signal sounds. Touch any sensor field.
2. The display shows the message for
Time Extension for five minutes.
3. Touch to activate.
4. Set Time Extension period. Touch OK
to confirm.
SET+GO
SET+GO function lets you set an oven func-
tion (or programme) and use it later with
one touch of the sensor field.
Activating the function:
1. Activate the appliance.
2. Set the heating function.
3. Touch again and again until the
display shows Duration .
4. Set the time.
5. Touch again and again until the
display shows SET+GO .
6. Touch OK to confirm.
To start SET+GO touch any sensor field (ex-
cept ). The set oven function starts.
When the oven function ends, an acoustic
signal sounds.
When the oven function operates, the
function Key Lock is on.
You can activate and deactivate the SET
+GO function in the Basic Settings
menu.
Heat+Hold
The Heat+Hold function keeps prepared
food warm at 80° for 30 minutes. It acti-
vates after the baking or roasting procedure
ends.
Conditions for the function:
• The set temperature is more than
80°C.
• The function duration is set.
Activating the function
1. Activate the appliance.
2. Select the oven function.
3. Set the temperature above 80°C.
4. Touch again and again until the
display shows Heat+Hold . Touch OK
to confirm.
When the function ends, an acoustic signal
sounds.
The Heat+Hold function operates for 30 mi-
nutes.
The Heat+Hold function stays on if you
change the oven functions.
You can activate or deactivate the func-
tion in Basic Settings menu.
Key Lock
The Key Lock prevents an accidental
change of the oven function .
Activating the Key Lock
1. Activate the appliance.
2. Set the oven function.
3. Touch again and again until the
display shows Key Lock
4. Touch OK to confirm.
The Key Lock is active.
Deactivating the Key Lock
1. Touch .
2. Touch OK to confirm.
The Key Lock is not active.
If you deactivate the appliance, the Key
Lock deactivates.
Child Lock
The Child Lock prevents an accidental oper-
ation of the appliance .
Activating the Child Lock
1. Activate the appliance.
Do not set an oven function.
2. Press and - at the same time un-
til the display shows a message.
Deactivating the Child Lock
1. Do the above steps again.
Automatic switch-off
The appliance deactivates after some time:
• if you do not deactivate the appliance;
• if you do not change the oven tempera-
ture.
Oven temperature Switch-off time
30°C - 115°C 12,5 h
120°C - 195°C 8.5 h
200°C - 245°C 5.5 h
12 electrolux

Oven temperature Switch-off time
250°C 3.0 h
To operate the appliance after an automatic
switch-off, first deactivate the appliance fully.
Heat-up indicator
When you activate an oven function, the
bar on the display comes on. The bar
shows that the temperature increases.
Rapid heat-up indicator
For some oven functions the rapid heat-up
function decreases the heat-up time auto-
matically. The bar of the indicator moves
from right to left until the oven reaches the
target temperature.
Residual heat indicator
When you deactivate the appliance, the dis-
play shows the residual heat. You can use
the heat to keep the food warm.
Cooling fan
When the appliance operates, the cooling
fan switches on automatically to keep the
surfaces of the appliance cool. If you switch
off the appliance, the cooling fan continues
to operate until the appliance cools down.
Safety thermostat
To prevent dangerous overheating (due to
incorrect use of the appliance or defective
components), the oven has a safety thermo-
stat, which interrupts the power supply. The
oven switches back on again automatically,
when the temperature drops.
HELPFUL HINTS AND TIPS
Warning! Refer to "Safety information"
chapter.
• The appliance has four shelf levels. Count
the shelf levels from the bottom of the ap-
pliance floor.
• You can cook different dishes on two lev-
els at the same time. Place the shelves
on level 1 and 3.
• The appliance has a special system
which circulates the air and constantly re-
cycles the steam. With this system you
can to cook in a steamy environment and
keep the food soft inside and crusty out-
side. It decreases the cooking time and
energy consumption to a minimum.
• Moisture can condense in the appliance
or on the glass doors. This is normal. Al-
ways stand back form the appliance
when you open the appliance door while
cooking. To decrease the condensation,
run the appliance for 10 minutes before
cooking.
• Wipe away moisture after every use of
the appliance.
• Do not put the objects directly on the ap-
pliance floor and do not cover the compo-
nents with aluminium foil when you cook.
This can change the baking results and
damage the enamel coating.
Baking cakes
• The best temperature for baking cakes is
between 150°C and 200°C.
• Preheat the oven for approximately 10 mi-
nutes before baking.
• Do not open the oven door before 3/4 of
the set cooking time is up.
• If you use two baking trays at the same
time, keep one level empty between them.
Cooking meat and fish
• Do not cook meat with weight below 1
kg. Cooking too small quantities makes
the meat too dry.
• To keep the red meat well cooked out-
side and juicy inside set the temperature
between 200°C-250°C.
• For white meat, poultry and fish set the
temperature between 150°C-175°C.
• Use a dripping pan for very fatty food to
prevent the oven from stains that can be
permanent.
• Leave the meat for approximately 15 mi-
nutes before carving so that the juice
does not seep out.
• To prevent too much smoke in the oven
during roasting, add some water into the
dripping pan. To prevent the smoke con-
densation, add water each time after it
dries up.
electrolux 13

Cooking times
Cooking times depend on the type of food,
its consistency, and volume.
Initially, monitor the performance when you
cook. Find the best settings (heat setting,
cooking time, etc.) for your cookware, rec-
ipes and quantities when you use this appli-
ance.
CARE AND CLEANING
Warning! Refer to "Safety information"
chapter.
Pyrolytic cleaning
With the Pyrolytic function, you can clean
the oven using pyrolysis. Set the function in
the Cleaning Menu .
Warning! The appliance becomes very
hot. There is the risk of burns.
Important! Before pyrolytic cleaning,
remove all the removable parts (the shelf
support rails, the accessories, etc.) from the
appliance.
1. Activate the appliance.
2. Touch or to select Cleaning
Menu . Touch OK to confirm.
3. Touch or to select Pyrolytic .
Touch OK to confirm.
4. Touch " +"/" -" to set the duration for
Pyrolytic .
5. Touch OK to confirm
When the oven reaches pre-set temper-
ature, the door locks .
•LIGHT -for a low degree of dirt (2:15);
•NORMAL -for a medium degree of dirt
(2:45);
•INTENSE -for a high degree of dirt (3:15)
Do not open the door during the heat-
ing up time. If you open the door, you
cancel the Pyrolytic .
Cleaning reminder
The reminder function tells the user when py-
rolytic cleaning is necessary.
The reminder function activates when you
set the appliance to the factory settings.
Activate and deactivate the reminder func-
tion in the options menu with CLEANING
MENU. .
Pyro reminder
The reminder function tells the user when py-
rolytic cleaning is necessary.
An acoustic signal sounds and the display
shows " Pyro " for approximately 15 sec-
onds.
Set the Pyrolytic cleaning function.
The display shows the reminder mes-
sage when the appliance is off until you
the clean the appliance with the Pyrolyt-
ic cleaning.
Cleaning assistant
Cleaning Assistant tells you the steps to op-
erate Pyrolytic , before you start the Pyrolytic
Activate and deactivate the Cleaning Assis-
tant in the options menu with CLEANING
MENU. .
Cleaning the door glass panels
1. Clean the door glass panels with warm
water and soap.
2. Carefully dry the door glass panels.
Cleaning the oven door
The oven door has four panels of glass.
You can remove the oven door and the in-
ternal panels of glass to clean them.
Removing the oven door and the glass
panels
1. Fully open the door and identify the
hinge to the left side of the door.
2. Push the tightening component until it
pulls back.
14 electrolux

3. Hold the pushed component with one
hand. Use a screwdriver with the other
hand to lift and turn the left side hinge
lever.
4. Identify the hinge to the right side of the
door.
5. Lift and turn the lever on the hinge.
6. Close the oven door to the first opening
position (halfway). Then pull forward
and remove the door from its seat.
7. Put the door on a soft cloth on a stable
surface.
8. Release the locking system to remove
the panels of glass.
electrolux 15

9. Turn the two fasteners by 90° and re-
move them from their seats.
90°
10. Carefully lift (step 1) and remove (step
2) the panels of glass one by one. Start
from the top panel of glass.
1
2
Clean the glass panels with water and
soap. Dry the glass panels carefully.
Installing the door and the glass panels
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels
(
1
), (
2
) and (
3
) back in the correct
sequence (refer to the illustration).
1 2 3
The middle panels (
2
-
3
) have a decora-
tive frame. When you install them, make
sure that the screen-printing zone looks to
the inner side of the door. Make sure that af-
ter the installation the surface of the glass
panel frame (
2
-
3
) on the screen-print-
ing zones is not rough when you touch it.
Make sure that you install the panels of
glass in the seats correctly (refer to the illus-
tration).
Replacing the oven light bulb/cleaning
the glass cover
Warning! Be careful! There is the risk
of electrical shock!
1. Turn the glass cover anti-clockwise to re-
move it.
2. Clean the glass cover.
3. Replace the oven light bulb with applica-
ble 300°C heat-resistant oven light bulb.
16 electrolux

New oven light bulb must have the
same parameters as your previous one.
4. Install the glass cover.
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
2. Pull the rear shelf support rail away from
the side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front!
WHAT TO DO IF…
Warning! Refer to "Safety information"
chapter.
Problem Possible cause Remedy
The oven does not heat
up. The oven is deactivated. Activate the oven.
The clock is not set. Set the clock.
The necessary settings are not set. Make sure the settings are correct.
The Child Lock is activated. Refer to "Child Lock".
The fuse in the fuse box is released. Examine the fuse. If the fuse is re-
leased more than one time, con-
tact a qualified electrician.
The display shows F11. The meat probe is not correctly in-
stalled into the meat probe socket. Put in the meat probe as far as pos- sible.
The oven lamp does not
operate. The oven lamp is defective. Refer to "Replace the oven lamp".
Steam and condensation
collect on the food and in
the oven.
You kept the dish in the oven for
too long. Do not keep the dishes in the oven for longer than 15-20 mi-
nutes after the cooking ends.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
electrolux 17

INSTALLATION
Warning! Refer to "Safety information"
chapter.
594
2
20
570
590
540
560
50
580
550 min
560÷570
550 min
593
560-570
80÷100
A
B
Electrical installation
Warning! Only a qualified and
competent person must do the
electrical installation.
The manufacturer is not responsible if
you do not follow safety precautions
from chapter "Safety".
This appliance is only supplied with a main
cable.
18 electrolux

ENVIRONMENT CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging material is environmen-
tally-friendly and recyclable. Plastic
parts are marked with international ab-
breviations such as PE, PS, etc. Dis-
pose of the packaging material in the
containers provided for this purpose at
your local waste management facility.
electrolux 19

Electrolux. Thinking of you.
Partagez notre imagination sur www.electrolux.com
SOMMAIRE
Consignes de sécurité 20
Description de l'appareil 23
Utilisation quotidienne 23
Conseils utiles 32
Entretien et nettoyage 33
En cas d'anomalie de fonctionnement 36
Installation 37
En matière de protection de
l'environnement 38
Sous réserve de modifications
CONSIGNES DE SÉCURITÉ
Lisez attentivement cette notice d'utilisation
avant l'installation et l'utilisation de l'appareil :
• Pour votre propre sécurité et la sécurité
de votre appareil
• Pour le respect de l'environnement
• Pour le bon fonctionnement de l’appareil.
Conservez cette notice d'utilisation avec
l'appareil. Si l'appareil devait être vendu ou
cédé à une autre personne, assurez-vous
que la notice d'utilisation l'accompagne,
afin que le nouvel utilisateur soit correcte-
ment informé du fonctionnement de celui-ci
et des avertissements s'y rapportant.
Le fabricant n'est pas responsable des dom-
mages liés à une mauvaise installation ou uti-
lisation.
Sécurité des enfants et des personnes
vulnérables.
• Cet appareil n'est pas destiné aux en-
fants et aux personnes dont les capaci-
tés physiques, sensorielles ou mentales,
ou le manque d'expérience et de connais-
sance les empêchent d'utiliser l'appareil
sans risque lorsqu'ils sont sans surveillan-
ce, ou en l'absence d'instruction d'une
personne responsable qui puisse leur as-
surer une utilisation de l'appareil sans dan-
ger.
• Ne laissez jamais les emballages à la por-
tée des enfants. Risque d'asphyxie ou de
blessure.
• Tenez les enfants et les animaux éloignés
de l'appareil lorsque la porte est ouverte
et pendant ou après le fonctionnement
de l'appareil. Risque de blessure ou d'in-
validité permanente.
• Si l'appareil est équipé d'une sécurité en-
fants (mécanique ou électronique), utilisez-
la. Celle-ci empêche les enfants (ou les
animaux) de manipuler l'appareil acciden-
tellement.
Consignes générales de sécurité
• Ne modifiez pas les spécifications de cet
appareil. Vous risqueriez de vous blesser
et d'endommager l'appareil.
• Ne laissez pas l'appareil sans surveillance
en cours de fonctionnement.
• Mettez à l'arrêt l'appareil après chaque uti-
lisation.
Installation
• Ne confiez l'installation et le raccorde-
ment de l'appareil qu'à un électricien
agréé. Contactez votre service après-ven-
te. Cela vise à éviter les risques de dom-
mages structurels ou corporels.
• Vérifiez que l'appareil n'a pas été endom-
magé au cours du transport. Ne bran-
chez jamais un appareil endommagé. Si
l'appareil est endommagé, veuillez con-
tacter votre magasin vendeur.
• Avant la première utilisation, assurez-
vous de bien retirer tous les emballages,
les étiquettes et les films protecteurs de
l'appareil. Ne retirez jamais la plaque si-
gnalétique. Cela peut annuler la garantie.
• Conformez-vous entièrement aux lois, dé-
crets, réglementations et normes en vi-
gueur dans le pays d'utilisation de l'appa-
reil (réglementations de sécurité, de recy-
clage, de l'électricité ou du gaz etc.).
• Veillez à débrancher l'appareil au cours
de l'installation.
• Soyez prudent lorsque vous déplacez l'ap-
pareil. En effet, il est lourd. Portez tou-
jours des gants de sécurité. Ne tirez ja-
mais l'appareil par la poignée.
20 electrolux