Electrolux WD001326 User manual

TSE-P 01.01 EB 1/56 599 34 55-61
SERVICE MANUAL
WASHING
ELECTROLUX ZANUSSI S.p.A.
Corso Lino Zanussi,30
Publication no.
I - 33080 PORCIA /PN (ITALY) 599 34 55-61
Tel [phone]
Fax [phone]
TSE-P
Edition: 15.01.2001
EN/SERVICE/EB
WASHING MACHINES
&
WASHER DRYERS
WITH EWM2000
ELECTRONIC CONTROL
Styling:
Multipanel (Built-in)
Production: Porcia/PN (IT)

TSE-P 01.01 EB 2/56 599 34 55-61
CONTENTS
GENERAL CHARACTERISTICS .............................................................. page 3/56
CONTROL PANEL .................................................................................... page 4/56
Control/display board ................................................................................. page 5/56
WASHING PROGRAMMES ...................................................................... page 6/56
Programme selector ................................................................................... page 6/56
Operation of the buttons............................................................................. page 8/56
Washing cycle options................................................................................ page 9/56
Buttons ....................................................................................................... page 10/56
Display........................................................................................................ page 14/56
Programme table legend ............................................................................ page 15/56
60º cotton cycle jetsystem.......................................................................... page 17/56
30º wool-handwash cycle jetsystem........................................................... page 18/56
60º cotton cycle traditional ......................................................................... page 19/56
30º wool-handwash cycle traditional .......................................................... page 20/56
Cotton and synthetics drying cycles........................................................... page 21/56
"FUCS" (Fast Unbalance Control System)................................................. page 22/56
Spin cycles ................................................................................................. page 24/56
TECHNICAL CHARACTERISTICS ........................................................... page 27/56
EWM2000 electronic control unit................................................................ page 27/56
Microprocessor memory............................................................................. page 28/56
Electronic pressure switch.......................................................................... page 29/56
Instantaneous door safety device............................................................... page 30/56
Detergent dispenser ................................................................................... page 31/56
Power supply to motor................................................................................ page 33/56
AC/DC converter ........................................................................................ page 33/56
Recirculation pump..................................................................................... page 34/56
Heating ....................................................................................................... page 34/56
Drying (washer/dryers only) ....................................................................... page 35/56
DIAGNOSTIC AND CONFIGURATION SYSTEMS .................................. page 37/56
Access to the diagnostics and configuration systems................................ page 37/56
Diagnostics system .................................................................................... page 38/56
Display board diagnostics .......................................................................... page 38/56
Diagnostics cycle........................................................................................ page 39/56
Programme selector ................................................................................... page 41/56
Alarms ........................................................................................................ page 42/56
Reading the last alarm ............................................................................... page 43/56
Alarm codes................................................................................................ page 44/56
Cancelling the last alarm condition............................................................. page 48/56
Configuration of the main PCB................................................................... page 49/56
Configuration codes ................................................................................... page 50/56
Examples of configuration .......................................................................... page 51/56
Exiting the diagnostics/configuration system ............................................. page 52/56
Basic circuit diagrams ................................................................................ page 53/56
Notes for the replacement of the control display/board ...................... page 56/56

TSE-P 01.01 EB 3/56 599 34 55-61
GENERAL CHARACTERISTICS
Washing machines/washer-dryers with EWM2000 electronic control system:
- electronic pressure switch
- anti-foam control function
- unbalance control system FUCS
- jetsystem or traditional washing system
- "Total exchange" jetsystem or traditional rinse system
- spin speeds up to 1600 rpm
- commutator motor AC or DC with separate converter
- heating element in the tub, 1950W
- water condensation drying system
- automatic or time-controlled drying cycles
- 550 + 550 W drying heater

TSE-P 01.01 EB 4/56 599 34 55-61
CONTROL PANEL
The control panel fitted to the appliance may be different depending on:
Þthe control/display board (3 versions)
Þthe programme selector
Þthe different design of the panel (on the number of buttons, LEDs)
Þthe different configuration of the buttons
Control panel example:
GENERAL FEATURES
Programme selector:
- 24, 21 o 12 positions
Main switch:
- bipolar switch
Push-buttons:
- maximum 8, horizontal position
LED:
- maximum 28, green for the wash functions, orange for the drying functions (washer dryers)
Display:
- 3 digits consisting of 24 green LEDs

TSE-P 01.01 EB 5/56 599 34 55-61
CONTROL/DISPLAY BOARD
1. Version with display (washing machines and washer/dryers):
Þ3 digits
Þ28 LEDs
Þ8 buttons
2. Version without display (washing machines):
Þ21 LEDs
Þ6 buttons
3. Version without display (washing machines):
Þ14 LEDs
Þ6 buttons

TSE-P 01.01 EB 6/56 599 34 55-61
WASHING PROGRAMMES
WASHING PROGRAMMES (24 position selector knob – WM & WD)
No. Programme Temperature No. of
rinses
Spin *
1CANCEL (RESET) -- -- --
2COTTON (WHITE) 90°3IMPCF_1
3COTTON ECO 67°3IMPCF_1
4COTTON (COLOUREDS) 60°3IMPCF_1
5COTTON (COLOUREDS) 50° ο 40° Economy 3IMPCF_1
6COTTON (COLOUREDS) 40°3IMPCF_1
7COTTON (COLOUREDS) 30°3IMPCF_1
8COTTON Cold wash (WM)
Drying (washer-dryer)
3
--
IMPCF_1
--
9SYNTHETICS 60°3IMP5
10 SYNTHETICS 50° ο 40° Economy 3IMP5
11 SYNTHETICS 40°3IMP5
12 SYNTHETICS 30°3IMP5
13 SYNTHETICS Cold wash (WM)
Drying (washer-dryer)
3
--
IMP5
--
14 DELICATES Cold wash 3 IMP7
15 DELICATES 30°3IMP7
16 WOOL - HAND WASH 40°3IMP4
17 WOOL - HAND WASH 30°3IMP4
18 WOOL - HAND WASH Cold wash 3 IMP4
19 SOAK 40° -- --
RINSES (if spin >700: cotton rinses) -- 3 IMPCF_1
20
RINSES (if spin ≤700: delicate rinses) -- 3 IMP7
SOFTENER (if spin >700: cotton softener) -- 1 IMPCF_1
21
SOFTENER (if spin ≤700: delicate softener) -- 1 IMP7
22 DRAIN -- -- --
SPIN (if spin >700: cotton spin) -- -- IMPCF_1
23
SPIN (if spin ≤700: delicate spin) -- -- IMP7
24 MINIPROGRAMME 30° 2 IMP7
* see spin cycle chapter
24-position selector knob
The programme selector determines the type of
washing cycle (for ex.: water level, drum movement,
number of rinses), the washing temperature and
enables the drying cycle to be selected according to
the laundry.
It is possible to turn the selector knob both clockwise
or counterclockwise.
The programme plate is divided into five sections:
ÞCotton
ÞSynthetics
ÞDelicates
ÞWool – Hand wash
Þspecial cycles (19÷24)
The first position is used to cancel the current cycle.

TSE-P 01.01 EB 7/56 599 34 55-61
WASHING PROGRAMMES (12 position selector knob – WM)
No. Programme Temperature No. of
rinses
Spin *
1CANCEL (RESET) -- -- --
2COTTON (WHITE) 90° ÷ 0°C 3 IMPCF_1
3COTTON (COLOUREDS) 60° ÷ 0°C 3 IMPCF_1
4SYNTHETICS 60° ÷ 0°C 3 IMP5
5DELICATES 40° ÷ 0°C 3 IMP7
6WOOL 40° ÷ 0°C 3 IMP4
7HAND WASH 40° ÷ 0°C 3 IMP4
8SOAK 40° C -- --
RINSES (if spin >700: cotton rinses) -- 3 IMPCF_1
9
RINSES (if spin ≤700: delicate rinses) -- 3 IMP7
10 DRAIN -- --
SPIN (if spin >700: cotton spin) -- -- IMPCF_1
11
SPIN (if spin ≤700: delicate spin) -- -- IMP7
12 MINIPROGRAMME 60° ÷ 0°C 2 IMP7
WASHING PROGRAMMES (12 position selector knob – WD)
No. Programme Temperature No. of
rinses
Spin *
1CANCEL (RESET) -- -- --
2COTTON 90° ÷ 0°C 3 IMPCF_1
3COTTON - DRYING -- -- --
4SYNTHETICS 60° ÷ 0°C 3 IMP5
5SYNTHETICS - DRYING -- -- --
6DELICATES 40° ÷ 0°C 3 IMP7
7WOOL 40° ÷ 0°C 3 IMP4
8HAND WASH 40° ÷ 0°C 3 IMP4
9SOAK 40° C -- --
RINSES (if spin >700: cotton rinses) -- 3 IMPCF_1
10
RINSES (if spin ≤700: delicate rinses) -- 3 IMP7
11 DRAIN -- --
SPIN (if spin >700: cotton spin) -- -- IMPCF_1
12
SPIN (if spin ≤700: delicate spin) -- -- IMP7
* see spin cycle chapter

TSE-P 01.01 EB 8/56 599 34 55-61
PUSH-BUTTON FUNCTION
The buttons’ function can be configured, and therefore it varies according to the model.
Matrix of the function of the different push-buttons:
Button LED Function 1 Function 2 Function 3 Function 4 Function 5 Function 6 Function 7
L1 Maximum
speed
Maximum
speed
90°C Very heavy 90°C Intensive --
L2 900 rpm 900 rpm 60°C Heavy 60°C Normal --
L3 700 rpm 700 rpm 40°C Normal 50°C Quick --
L4 500 rpm 500 rpm 30°C Daily 40°C -- --
1
L5 Rinse hold No Spin 0°C Light 30°C -- Prewash
L6 Maximum
speed
Maximum
speed
90°C Very heavy 90°C -- --
L7 900 rpm 900 rpm 60°C Heavy 60°C -- --
L8 700 rpm 700 rpm 40°C Normal 50°C -- --
L9 500 rpm 500 rpm 30°C Daily 40°C Quick --
2
L10 Rinse hold Spin speed
reduction
0°C Light 30°C Prewash Prewash
3L11
Rinse hold Spin speed
reduction
Intensive Economy Stain Quick Prewash
4L12
Rinse hold Spin speed
reduction
Intensive Economy Stain Quick Extra Rinse
L24 -- -- -- Intensive Delay 8h Extra Dry --
L25 -- -- -- Normal Delay 4h Cupboard
Dry
--
5
L26 -- -- -- Quick Delay 2h Iron Dry --
L13 Rinse hold Spin speed
reduction
Intensive -- -- -- Extra Rinse
L27 -- -- -- -- -- Drying time -- 6
L14 Rinse hold Spin speed
reduction
Intensive Bio Half Load -- Extra Rinse
7L28
Delayed
start
-- -- -- -- -- --
8L15
Start/Pause------------

TSE-P 01.01 EB 9/56 599 34 55-61
“ON/OFF” button
Press this button to switch the machine on. Press it again to switch the
machine off.
WASHING CYCLE OPTIONS
The washing cycle options should be entered after selecting the desired programme (using the selector
knob) and before pressing START/PAUSE.
When the button is pressed, the corresponding LED lights up; by pressing the button again the LED
switches off.
Possible options for each programme
PROGRAMMES
OPTIONS
Cotton Synthetics Delicate Wool Mini Soak Rinses Softener Spin Drain
95°C ⊗
⊗⊗
⊗
Eco X
60°C X⊗
⊗⊗
⊗X
50° o Eco XX X
40°C XX
⊗
⊗⊗
⊗⊗
⊗⊗
⊗⊗
⊗⊗
⊗
30°C XXXX
⊗
⊗⊗
⊗
Cold (WM) XXXX
⊗
⊗⊗
⊗
Electronic drying 3 levels 1 level
Time-controlled
drying
10÷130
minutes
10÷100
minutes
>900 rpm ⊗
⊗⊗
⊗XXX
900 rpm X⊗
⊗⊗
⊗⊗
⊗⊗
⊗XXX
700 rpm XX
⊗
⊗⊗
⊗XX ⊗
⊗⊗
⊗⊗
⊗⊗
⊗⊗
⊗⊗
⊗
500 rpm XXXXX XXX
No spin XXXX XX
Rinse hold XXXXX XX
Prewash XXX
Stains XXX
Intensive/Heavy XX
Daily XX
Quick/Light XXX
Economy XX
Bio XX
Extra rinse XXX X
Half Load X
Delayed start XXXXXXXXXX
⊗
⊗⊗
⊗= Standard functions X = options

TSE-P 01.01 EB 10/56 599 34 55-61
“PREWASH” button
This option selects an additional prewash phase at 30º C at the beginning of the cycle, followed first by a
drain phase and then by the next phase. In the COTTON and SYNTHETICS cycles also a short spin phase
is performed.
The prewash option can cannot be selected for WOOL cycles, nor in conjunction with the STAIN option.
"STAINS" button
The STAINS option can be selected in the COTTON, SYNTHETICS and DELICATES cycles with
temperatures of 40ºC or higher. This option can be selected only during the programme selection phase,
before pressing the START/PAUSE button.
It is used with heavily soiled fabrics or stains; this option adds the STAIN phase, which consists of the
introduction of special additives from the prewash compartment after the BIO phase at 40ºC, as well as a
10-minute extension of the movement of the motor.
The STAINS option cannot be selected together with the PREWASH, INTENSIVE, and QUICK/DAILY
option.
“INTENSIVE” / “HEAVY SOIL” button
This option is available in the COTTON and SYNTHETICS cycles and it increases the duration of the
movement of the drum after the heating phases.
This option cannot be selected together with the STAINS, the QUICK /DAILY and the ECO options.
“QUICK” / “LIGHT SOIL” / “DAILY” button
This option can be selected in the COTTON, SYNTHETICS and DELICATES cycles, and can also be
selected while the appliance is in "PAUSE" mode. This option reduces the duration of the cycle.
In COTTON cycles, one of the rinses is eliminated; the water level in the other rinses is increased.
This option cannot be selected together with the STAINS, INTENSIVE or ECO options.
“LEVEL OF SOILING” button
This option can be selected at any time during the washing programme (after pressing "PAUSE").
The standard programme is set for NORMAL soiling; by pressing this button, the user can modify this setting
to INTENSIVE/HEAVY SOIL or LIGHT SOIL/DAILY.
“BIO” button
This option is available in the COTTON and SYNTHETICS cycles with temperatures equal to or higher than
40°C, and can be selected only during the programme selection phase.
The BIO option adds a 10-minute drum movement phase after the 40°C heating phase in order to activate
the enzymes contained in the detergent
“HALF LOAD” button
This option can be selected in the COTTON cycles on traditional (i.e. non-Jetsystem) washing machines,
and reduces the number of rinse cycles by one.
“EXTRA RINSE” button
Can be used with all programmes except the wool programme. The machine performs 4 rinses instead
of 3.
This option is recommended for people who are allergic to detergents and in areas where the water is
very soft.

TSE-P 01.01 EB 11/56 599 34 55-61
“RINSE HOLD” button
When this option is selected the cycle ends leaving water in the tub after the final rinse to prevent fabrics
from creasing.
In the RINSE HOLD phase, the final spin speed can be modified; press the START/PAUSE button to
complete the cycle, or select a new drain or spin programme. In this case turn the knob on the CANCEL
position, before the new programme is selected.
In the case of washer-dryers, this option can not be selected, if the drying phase at the end of the cycle has
already been selected.
If the drain phase has not been performed after 18 hours, the programme ends automatically.
“SPIN SPEED” button
When this button is pressed, the speed of the intermediate and final spin phases is modified as shown in the
table below. The maximum speed in the COTTON cycles depends on the models. It is 900 rpm in the
SYNTHETIC and WOOL/HANDWASH cycles and 700 rpm in the DELICATES cycle.
If automatic drying has already been selected (washer-dryers only), the minimum spin speed is 900 rpm for
COTTON and 700 rpm for SYNTHETICS.
The configuration of this button varies according to the model:
Maximum speed (rpm) Level 1
(rpm)
Level 2
(rpm)
Level 3
(rpm)
Level 4
1600 (washing machines) 900 700 500
1600 (washer-dryers) 1200 900 700
1500 (washing machines) 900 700 500
1500 (washer-dryers) 1200 900 700
1400 (washing machines) 900 700 500
1400 (washer-dryers) 1200 900 700
1300 900 700 500
1200 900 700 500
1100 900 700 500
1000 900 700 500
900 --- 700 500
No spin
or
Rinse hold
In COTTON cycles, this option also modifies the structure of the rinsing phases according to the
speed of the intermediate spin:
Intermediate spin
(rpm)
Traditional washing Jetsystem washing
1st rinse 2nd rinse Last rinse 1st rinse 2nd rinse Last rinse
<850 TR2 TR2 TR2 TR2 TR2 TR2
850-950 TR1 TR2 TR2 TE TR2 TR2
1000-1150 TR1 TR1 TR2 TE TE TR2
>1150 TR1 TR1 TR1 TE TE TE
TR2 Traditional rinse at second level
TR1 Traditional rinse at first level
TE "total exchange" (virtual tank) jetsystem rinse
In the RINSE and SPIN special programmes, this button reduces not only the spin speed but it also modifies
the spin structure:
Þfor spin phases superior to 700 rpm, the spin cycle corresponds to the COTTON spin cycles.
Þfor spin phases superior to 700 rpm, the spin cycle corresponds to the DELICATES spin cycles.

TSE-P 01.01 EB 12/56 599 34 55-61
“REDUCED SPIN SPEED” button
When this button is pressed, the speed of the final spin in COTTON cycles is reduced to 650 rpm.; in the
SYNTHETICS, DELICATES and WOOL cycles it is reduced to 500 rpm.
When the RINSE or SPIN cycles are selected, the spin structure changes from the COTTON to the
DELICATES spin.
“DELAYED START” button
Models with digit: This button can be used during the programme selection phase to enter a delayed start
time (from 1 to 24 hours). During the delayed start countdown, the time decreases at
intervals of one hour.
Models with led: This button can be used during the programme selection phase to enter a delayed start
time of 2, 4 or 8 hours. During the delayed start countdown, the LEDs switch off
according to the time to elapse.
“NO BUZZER” option
On models provided with buzzer, it is possible to
disactivate the sound which indicates the end of
the cycle.
Press simultaneously pause button and no. 6 (or
5) button to disactivate the buzzer; this option is
memorised as long as it will not be disactivated
through the same procedure.
In case of an alarm condition the buzzer will be active.
“TEMPERATURE” button (only for appliances with the 12-position programme selector)
Type A Type B
90°C90°C
60°C60°C
40°C50°C
30°C40°C
When this button is pressed, the temperature for the cycle is modified
according to the configuration of the button.
The TEMPERATURE button is operative only after selecting the type of
fabric; the temperature may be modified up to the end of the washing cycle
(after pressing PAUSE).
0°C30°C
“ECONOMY” button (only for appliances with the 12-position programme selector)
This option is available in the COTTON and SYNTHETICS cycles with temperatures higher than 40°C. The
ECO option can be selected only during the programme selection phase.
It reduces the temperature of the water during the programme and increases the drum movement phases
after the heating phases.
This option cannot be selected together with the INTENSIVE or QUICK/DAILY options.

TSE-P 01.01 EB 13/56 599 34 55-61
“ELECTRONIC DRYING” button (WASHER-DRYERS, certain models only)
It is possible to select two different electronic levels of dryness: one for COTTON and one for SYNTHETICS
cycles:
ÞExtra dry (only cotton)
ÞStore dry (cotton and synthetics)
ÞIron dry (only cotton)
The drying time is automatically calculated by the "Fuzzy" logic.
The drying phase can be performed either as automatic drying phase (non stop programme), if previously
selected together with the washing programme, as well as a separate drying phase.
“DRYING TIME” button (WASHER-DRYERS)
When this button is pressed it is possible to select (5 minutes a time) from 10 to 130 minutes drying for
COTTON cycles and from 10 to 100 minutes for SYNTHETICS cycles.
The drying cycle can be selected both as automatic drying and as separate drying cycle.
“START/PAUSE” button
Start: After entering the parameters for the cycle, press this button to start the
wash programme; the corresponding pilot light stops flashing. If the
DELAYED START button has been pressed, the delayed start
countdown is shown up in the display.
Pause: When the button is pressed again, the current programme is interrupted
and the display, or relative LED, flashes. When the appliance is in
“pause” mode the door can be opened provided that:
- the appliance is not in the heating or drying phase
- the water level is not high
- there is no movement of the drum
When in “pause” mode, some of the programme parameters can be modified:
- all cycle options can be modified prior to the phase in which they are performed
- the spin speed can be modified before the final spin
- drying selections can be modified before the starting of the drying phase.
To re-start the cycle, press the START/PAUSE button.
Water drain and spin cycle: after the "rinse hold" phase press this button to start the cycle with the drain
and final spin again.

TSE-P 01.01 EB 14/56 599 34 55-61
DISPLAY
The display shows the following information:
Þthree flashing lights, when the appliance is switched on.
Þthe wash programme duration; it is shown up after the programme has been selected. The time
corresponding to the maximum wash load is shown up. While performing the cycle, the time decreases
(updated) every minute.
Þthe drying programme duration (washer-dryers), which is displayed during the phase of selection of
the drying time. After two seconds the total time corresponding to half wash load is shown up. In non-
stop cycles the time results from the wash plus drying time.
Þthe programme end indicated by a "0" (when it is possible to open the door).
Þ the delayed start, selected through the relative button. After the START/PAUSE button has been
pressed, the countdown begins and the time decreases every hour.
Þan alarm code, in case of a malfunction.
PROGRAMME PHASE LEEDS
During the selection of the programme, the LEDs relative to the
different phases of the programme light up.
When the cycle starts only the LED corresponding to the current
phase lights.
The programme end LED switches on when the programme ends.
The "overdosing" LED switches on at the end of the cycle if, during
the programme, foam is detected caused by an excessive detergent
addition (in some cases the cause might be an obstructed drain
hose).
LED function according to the type of appliance:
Without door indication LED With door indication LED
LED LED
colour Washing
machines
Washer-dryers Washing
machines
Washer-dryers
L16 Green Prewash Prewash Door Door
L17 Green Wash Wash Prewash Prewash
L18 Green Rinse Rinse Wash Wash
L19 Green Rinse Hold Rinse Hold Rinse Rinse
L20 Green Drain Drain Drain Drain
L21 Green Spin Spin Spin Spin
L22 Orange Filter Clogged Drying Filter Clogged Drying
L23 Green End/alarm End End/alarm End

TSE-P 01.01 EB 15/56 599 34 55-61
WASHING PROGRAMMES (SEQUENCE CHARTS)
KEY TO PROGRAMMES
Description
Calibration Drain sub-phase for calibration of the electronic pressure switch
Levels
WC Level of water in the tub
RPC Control level for circulation pump
DPC Control level for drain pump
MC Control level for motor
Pumps
OFF Pump off
ON Pump on
LEV Pump on from one level of pressure switch
Water inlet valves
ELV2 Prewash
ELV3 Wash
ELV2 ELV3 Prewash + wash = softener
Refilling
NR Normal refilling
VT "Total exchange" refilling (virtual tank)
WL Electronic pressure switch
AB Safety pressure switch
Dis Level control disabled
En Level control enabled
Movement (motor)
OFF Motor stopped
ON Motor in operation
LEV Level movement
Tempo
Tout Maximum time (timeout)
Drying
TMP It is active up to the selected temperature
Motor movement
Code Pause (sec) Movement (sec) Speed (rpm)
D_MOV 12 4 55
E_MOV 31055
E1_MOV 41275
SE_MOV 4 24 55/40
N_MOV 8855
PWL1_MOV 40 1 35
PWL3_MOV 12 1 35
PWL4_MOV 57 1 35
COLD_MOV 41240
CR3_MOV Single-direction movement 80
DLD_MOV Single-direction movement 40
DRY_MOV 57 3 55

TSE-P 01.01 EB 16/56 599 34 55-61
SE Movement:
VT movement during rinses in "jetsystem total exchange" COTTON programmes (virtual tank):
During these phases, in which the motor rotates at high speed, if the electronic pressure switch detects that
the water in the tub falls below a certain level, the following operations are performed:
spin at 470 rpm (VT_MOV_CODE) to remove the water from the fabrics and therefore to increase the
level in the tub.
5 seconds pause, during which the level is again checked and, if necessary, the solenoid valve is
activated in order to load water until the level is correct.
energetic movement (E) (with the circulation pump in operation).
These operations may be repeated up to a maximum of three times for each rinse.
The parameters of the different programmes (levels, movements) vary according to the wash system of the
different models:
jetsystem (with circulation pump)
traditional

TSE-P 01.01 EB 17/56 599 34 55-61
Cotton 60 JETSYSTEM (G46L Intermediate spin 850-1000)
Levels (mm H2O) Movement RefillingStep
n.°
PHASE Description
wc rpc dpc mc
Rec.
pump
Drain
pump
Elv / Det
comp. type code type wl ab
Temp.
°C
Time Time to
end
1WASH CALIBRATION 35/15 35/15 35/15 35/15 OFF ON OFF Motor Stopped NR Dis Dis Tout 10' 0.00.20 2 WATER LOAD 40/15 OFF ELV2 En Tout 15' 0.01.40 3 MOVEMENT ON PWL3_MOV 1' 0.01.00 4 WATER LOAD 70/30 LEV ELV3 DLD_MOV Tout 15' 0.01.40 5 MOVEMENT 60/40 60/40 LEV COLD_MOV 4' 0.04.00 6 MOVEMENT OFF E_MOV 3' 0.03.00 7 HEATING 35/15 35/15 En 40 Tout 40' 0.08.50 8 HEAT+MOV OFF ON 54 2' 0.02.00 9 HEATING LEV En En 54 Tout 40' 0.06.50
10 MOVEMENT ON ON Dis Dis 2' 0.02.00 11 HEAT+MOV OFF 54 2' 0.02.00 12 HEATING LEV En En 54 Tout 40' 0.01.10 13 MOVEMENT ON ON SE_MOV Dis Dis 12' 0.12.00 14 MOVEMENT N_MOV 4' 0.04.00 15 MOVEMENT SE_MOV 14' 0.14.00 16 MOVEMENT OFF OFF Motor Stopped 22'' 0.00.20 17 WATER DRAIN Lev ON D_MOV Tout 10' 0.00.20 18 SPINNING ON IMP6 Tout 20' 0.09.00 19 1st RINSE MOVEMENT OFF ON CR3_MOV 5'' 0.00.10 20 WATER LOAD 75/20 LEV En Tout 15' 0.01.40 21 MOVEMENT 35/25 E_MOV VT 5' 0.05.00 22 MOVEMENT E1_MOV NR Dis 3' 0.03.00 23 WATER DRAIN OFF Lev D_MOV Tout 10' 0.00.20 24 SPINNING ON IMP6_RINSE Tout 20' 0.05.00 25 2nd RINSE MOVEMENT 35/15 OFF ON CR3_MOV 5'' 0.00.10 26 WATER LOAD 75/20 LEV En Tout 15' 0.01.40 27 MOVEMENT ON E_MOV VT 5' 0.05.00 28 MOVEMENT E1_MOV NR Dis 3' 0.03.00 29 WATER DRAIN OFF Lev D_MOV Tout 10' 0.00.20 30 SPINNING ON IMP6_RINSE Tout 20' 0.05.00 31 3rd RINSE MOVEMENT 35/15 OFF ON CR3_MOV 5'' 0.00.10 32 (softener) WATER LOAD 95/20 LEV ELV2 ELV3 N_MOV En Tout 15' 0.01.40 33 MOVEMENT 95/20 11' 0.11.00 34 MOVEMENT OFF OFF Motor Stopped 22'' 0.00.20 35 SPINNING WATER DRAIN 35/15 35/15 Lev ON D_MOV Tout 10' 0.00.20 36 SPINNING ON IMPCF_01_AC Tout 20' 0.20.00 37 MOVEMENT OFF N_MOV 2' 0.02.00

TSE-P 01.01 EB 18/56 599 34 55-61
Handwash 30 JETSYSTEM G46L
Levels (mm H2O) Movement RefillingStep
n.°
Phase Description
wc rpc dpc mc
Rec.
pump
Drain
pump
Elv / Det
comp. type code type wl ab
Temp.
°C
Time Time to
end
1WASH CALIBRATION 35/15 35/15 35/15 35/15 OFF ON OFF Motor Stopped NR Dis Dis Tout 10' 0.00.00 2 WATER LOAD 40/15 OFF ELV2 En Tout 15' 0.01.10 3 MOVEMENT ON PWL3_MOV 1' 0.01.00 4 WATER LOAD 115/50 LEV ELV3 OFF Motor Stopped Tout 15' 0.01.10 5 MOVEMENT LEV PWL1_MOV 4' 0.04.00 6 HEATING ON En 30 Tout 40' 0.06.20 7 MOVEMENT LEV 2' 0.02.00 8 HEAT+MOV 30 14' 0.14.00 9 MOVEMENT OFF OFF Motor Stopped Dis Dis 22'' 0.00.20
10 WATER DRAIN Lev Tout 10' 0.00.20 11 TIME WATER DRAIN ON 1' 0.01.30 12 1st RINSE MOVEMENT 35/15 OFF OFF Motor Stopped 5'' 0.00.10 13 WATER LOAD 160/80 LEV En Tout 15' 0.01.10 14 MOVEMENT ON PWL3_MOV 3' 0.03.00 15 WATER DRAIN OFF Lev OFF Motor Stopped Dis Tout 10' 0.00.20 16 TIME WATER DRAIN ON 1' 0.01.30 17 2nd RINSE MOVEMENT 35/15 OFF OFF Motor Stopped 5'' 0.00.10 18 WATER LOAD 160/80 LEV En Tout 15' 0.01.10 19 MOVEMENT ON PWL1_MOV 3' 0.03.00 20 WATER DRAIN Lev OFF Motor Stopped Dis Tout 10' 0.00.20 21 TIME WATER DRAIN ON 1' 0.01.30 22 3rd RINSE MOVEMENT 35/15 OFF OFF Motor Stopped 5'' 0.00.10 23 (softener) WATER LOAD 160/80 LEV ELV2 ELV3 En Tout 15' 0.01.10 24 MOVEMENT ON PWL1_MOV 5' 0.05.00 25 MOVEMENT OFF OFF Motor Stopped Dis 22'' 0.00.20 26 SPINNING WATER DRAIN 35/15 Lev OFF Motor Stopped Tout 10' 0.00.20 27 SPINNING ON ON IMP4 Tout 20' 0.14.20

TSE-P 01.01 EB 19/56 599 34 55-61
Cotton 60 TRADITIONAL (G46L Intermediate spin 850 10000)
Levels Movement RefillingStep
n.°
PHASE Description
wc dpc mc
Drain
pump
Elv / Det
comp. type code type wl ab
Temp.
°C
Time Time to
end
1WASH CALIBRATION 40/15 40/15 40/15 ON OFF Motor Stopped NR Dis Dis Tout 10' 0.00.20 2 WATER LOAD OFF ELV2 En Tout 15' 0.01.40 3 MOVEMENT ON PWL3_MOV 1' 0.01.00 4 MOVEMENT 1'' 0.00.00 5 WATER LOAD 95/65 ELV3 OFF Motor Stopped Tout 15' 0.01.40 6 MOVEMENT 95/65 LEV COLD_MOV 4' 0.04.00 7 MOVEMENT E_MOV 3' 0.03.00 8 HEATING En 40 Tout 40' 0.12.10 9 HEATING LEV N_MOV En En 56 Tout 40' 0.12.00
10 MOVEMENT ON SE_MOV Dis Dis 6' 0.06.00 11 MOVEMENT E_MOV 8' 0.08.00 12 MOVEMENT N_MOV 4' 0.04.00 13 MOVEMENT SE_MOV 18' 0.18.00 14 MOVEMENT PWL3_MOV 4' 0.04.00 15 WATER DRAIN Lev D_MOV Tout 10' 0.00.20 16 SPINNING ON IMP6 Tout 20' 0.09.00 17 1st RINSE MOVEMENT 40/15 40/15 OFF OFF Motor Stopped 6'' 0.00.10 18 WATER LOAD 125/70 En Tout 15' 0.01.40 19 MOVEMENT 125/70 LEV E_MOV 5' 0.05.00 20 WATER DRAIN Lev ON D_MOV Dis Tout 10' 0.00.20 21 SPINNING ON IMP6_RINSE Tout 20' 0.05.00 22 2nd RINSE MOVEMENT 40/15 40/15 OFF OFF Motor Stopped 6'' 0.00.10 23 (softener) WATER LOAD 125/70 En Tout 15' 0.01.40 24 MOVEMENT 125/70 LEV E_MOV 5' 0.05.00 25 WATER DRAIN Lev ON D_MOV Dis Tout 10' 0.00.20 26 SPINNING ON IMP6_RINSE Tout 20' 0.05.00 27 3rd RINSE MOVEMENT 40/15 40/15 OFF OFF Motor Stopped 6'' 0.00.10 28 WATER LOAD 145/90 ELV2 ELV3 En Tout 15' 0.01.40 29 MOVEMENT 145/90 LEV N_MOV 7' 0.07.00 30 MOVEMENT OFF Motor Stopped Dis 22'' 0.00.20 31 SPINNING WATER DRAIN 40/15 40/15 Lev ON D_MOV Tout 10' 0.00.20 32 SPINNING ON IMPCF_01_AC Tout 20' 0.20.00 33 MOVEMENT OFF N_MOV 2' 0.02.00

TSE-P 01.01 EB 20/56 599 34 55-61
Handwash 30 TRADITIONAL
Levels (mm H20) Movement RefillingStep
n.°
PHASE Description
wc dpc mc
Drain
pump
Elv / Det
comp. type code type wl ab
Temp.
°C
Time Time to
end
1WASH CALIBRATION 40/15 40/15 40/15 ON OFF Motor Stopped NR Dis Dis Tout 10' 0.00.00 2 WATER LOAD OFF ELV2 En Tout 15' 0.01.10 3 MOVEMENT ON PWL3_MOV 1' 0.01.00 4 WATER LOAD 150/80 ELV3 OFF Motor Stopped Tout 15' 0.01.10 5 MOVEMENT LEV PWL1_MOV 4' 0.04.00 6 HEATING En 30 Tout 40' 0.05.00 7 MOVEMENT 2' 0.02.00 8 HEAT+MOV 30 14' 0.14.00 9 MOVEMENT OFF Motor Stopped Dis Dis 22'' 0.00.20
10 WATER DRAIN Lev Tout 10' 0.00.20 11 TIME WATER DRAIN ON 1' 0.01.30 12 1st RINSE MOVEMENT 40/15 OFF OFF Motor Stopped 6'' 0.00.10 13 WATER LOAD 153/110 En Tout 15' 0.01.10 14 MOVEMENT ON PWL3_MOV 3' 0.03.00 15 WATER DRAIN Lev OFF Motor Stopped Dis Tout 10' 0.00.20 16 TIME WATER DRAIN ON 1' 0.01.30 17 2nd RINSE MOVEMENT 40/15 OFF OFF Motor Stopped 6'' 0.00.10 18 WATER LOAD 153/110 En Tout 15' 0.01.10 19 MOVEMENT ON PWL1_MOV 3' 0.03.00 20 WATER DRAIN Lev OFF Motor Stopped Dis Tout 10' 0.00.20 21 TIME WATER DRAIN ON 1' 0.01.30 22 3dr RINSE MOVEMENT 40/15 OFF OFF Motor Stopped 6'' 0.00.10 23 (softener) WATER LOAD 153/110 ELV2
ELV3
En Tout 15' 0.01.10
24 MOVEMENT ON PWL1_MOV 5' 0.05.00 25 MOVEMENT OFF Motor Stopped Dis 22'' 0.00.20 26 SPINNING WATER DRAIN 40/15 Lev OFF Motor Stopped Tout 10' 0.00.20 27 SPINNING ON ON IMP4 Tout 20' 0.14.20