Electrovision A195L User manual

FIXED TV MOUNTING BRACKET-EXTRA LARGE
Vesa Size : up to 600 x 900 mm
User Manual
Thank you for purchasing an Electrovision bracket, please read these instructions carefully
and leave with the user of the product for future reference.
A195L BLACK
A195LA WHITE

IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product for future
reference.
BEFORE USE
Inspect the product for any signs of damage. If the product is damaged, DO NOT use it,
and contact your supplier immediately
PRODUCT SAFETY
• Prior to the installation of this product, the installation instructions should be read and
completely understood. The installation instructions must be read to prevent personal
injury and property damage. Keep these installation instructions in an easily
accessible location for future reference.
• CAUTION: The maximum load capacity is 40Kg. Use with products exceeding the
maximum load capacity may cause serious injury. See appliance instructions.
• Do not install on a structure that is prone to vibration, movement or chance of impact.
Failure to do so could result in damage to the display and/or damage to the bracket.
•Do not place near heaters, fireplaces, air conditioners, in direct sunlight, or any other
heat producing source. Failure to do so may result in damage to the display and could
increase the risk of fire.
• It is recommended that two people perform the installation. Injury and/or damage can
result from dropping or mishandling the display.
• The enclosed instructions are an aid to installation and cannot cover all eventualities,
if you have any concerns regarding the mounting of the frame or brackets you should
consult an expert.
• CAUTION: Before installation the mounting area should be checked that it is suitable
for the weight of the bracket and screen and is free from pipes, electric cables or any
other obstructions.

Spacer 50mm Screw Adaptor
TV MOUNTING ACCESSORIES
TOOLS REQUIRED
STUD WALL FITTING INSTRUCTIONS
• Select a suitable position to mount the frame.
• It is recommended that the frame is mounted using the supplied kit to the wooden
supports behind the plasterboard. If you wish to mount directly to the plasterboard a
mounting hardware must be purchased. The screws and plugs provided are not suitable
for this purpose.
• Attach the spirit level (K) to the frame and place against the wall.
• Use a stud detector to locate the centre points of 3 suitable wooden supports.
• Mark the holes required using the spirit level to keep the frame horizontal.
• Drill pilot holes 5mm diameter by 60mm deep in the supports.
• Attach the frame to the wall using the 6x50mm screws (H) and Washers (J))
Plug Spirit LevelWasher
60mm
5mm
Wooden
Support
JH
ABCDE
FGHIJK
M4x16mm M5x16mm M6x16mm M8x16mm M8x25mm
(4PCS) (4PCS) (4PCS)(4PCS) (4PCS)
(4PCS) (4PCS) (6PCS) (6PCS) (6PCS) (1PCS)

BRICK/CONCRETE WALL FITTING INSTRUCTIONS
• Select a suitable position to mount the frame.
• Attach the spirit level (K) to the frame.
• Use a stud detector to check for hidden cables, pipes or steelwork.
• Place the frame against the wall and mark the 6 holes required, using the spirit level to
keep the frame horizontal.
• Drill the 6 holes with a 10mm diameter drill bit to a depth of 60mm.
• Insert the wall plugs (I).
• Attach the frame to the wall using the 6x50mm screws (H) and washers (J)
60mm
10mm
Spirit Level
Concrete Wall
J
I
H
ATTACHING BRACKETS TO TV
The A195L/LA TV bracket comes with a range of TV mounting accessories designed
to fit the majority of televisions. Depending upon the required parts it may be
necessary to use screws (A-E)with the Adaptor (F) and Spacer (G). The television
should be laid flat on a soft surface so as not damage or mark the screen.
G
F
A, B, C, D, or E

If the television has a curved back or includes an obstruction that may prevent the brackets
from the back. The brackets can now be secured with screws (A-E)with the Adaptor (F)
and spacer (G) if necessary.
ATTACHING BRACKETS & TV TO FRAME
Due to the risk of damage or injury it is recommended that a minimum of two people
should be used to attach the television to the frame. The television should be tilted
slightly backwards and the top hook section of the bracket should be placed on the top
rail of the frame. The television should now be lowered onto the frame and the safety
release cords should be pulled down to allow the bottom section of the bracket to click
into place. Release the cords to secure the TV to the frame.
G
F
A, B, C, D, or E
TVs with a curved back
or obstruction

SERVICE WARRANTY
Electrovision Ltd. guarantees the product free from defects in materials and workmanship
for a period of twelve months.
Should this bracket be operated under conditions other than those recommended, or any
attempts are made to service or modify the bracket, then the warranty will be rendered
void. The product you buy may sometimes differ slightly from illustrations. This warranty is
in addition to, and does not affect, your statutory rights.
Our guarantee is administered by our retailers.
If your product arrives damaged, you must contact the retailer from whom you bought it.
The retailer’s contact details will be on the invoice that arrived with the product, or on the
e-mail you received when you placed the order. Do not contact Electrovision, only your
retailer can arrange a replacement.
If the product needs to be repaired or replaced, you must contact the retailer from whom
you bought it. The retailer’s contact details will be on the invoice that arrived with the
product, or on the e-mail you received when you placed the order.
If you have just received your product and require technical help in using it, please call our
Help Desk on [phone]
Electrovision Ltd.,
Lancots Lane, Sutton,
St. Helens, Merseyside.
WA9 3EX
www.electrovision.co.uk