Element TurboExtract EV01AB96GB User manual

FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT 1
QUICK
STA RT
GUIDE
TurboExtractTM

QUICK START GUIDE2 FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT 3
WHAT’S
INCLUDED
IN THE
BOX
HOW TO ASSEMBLE
YOUR VACUUM
Element EV Lyte Vacuum
Hose
Upper Cord Hook Lower Cord Hook
Handle
Pet (H)airBrush Tool
3-in-1 Tool
Click! Click!
Vacuum cleaner with
dust cup.
Slide handle into top of
vacuum cleaner. Push
down until it clicks.
Insert bent end of hose
into opening at back
of dust cup. Twist hose
clockwise to lock.
Insert the 3-in-1
accessory into the
onpboard storage
reservoir as
shown above.
Loop hose over
hose retainer.
Push loose end
of hose securely
onto hose inlet.
Align upper
and lower cord
hooks and press
to snap in place.
Upper cord
hook should
rotate freely.
Wrap cord onto
upper and lower
cord hooks.
Store Pet
(H)airBrush on
front of handle.
Align brush
opening with
slot and push
to snap tool
into clip.

QUICK START GUIDE4 FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT 5
HOW TO USE
YOUR VACUUM
HOW TO USE
YOUR ACCESSORIES
To empty debris, press lever to
release bottom lid.
Step on handle release to
lower handle into position for
vacuuming oors.
Press release button and li o
dust cup.
Step on power switch to turn
vacuum cleaner on. Step on
again to turn o.
Plug power cord into outlet. Turn height adjustment knob to
adjust from bare oors high
pile carpet.
Empty dust cup after every use.
Click!
• Place vacuum in upright position.
• Turn height adjustment knob to
highest position.
• Pull up on hose connection to release hose
end from hose inlet (Fig. 1).
• Push end of hose into top of handle and
twist clockwise until it clicks (Fig. 2).
• Press handle release latch and pull out
handle with wand (Fig. 3).
• To attach accessories, push desired
tool onto end of wand or hose (Fig. 4).
1
3
2
4
Pet (H)airBrush
Use to remove pet hair from stairs,
carpet and upholstery.
3-in-1 Tool
For vacuuming in narrow
and hard-to-reach places
Caution: When using tools,
always place handle in
upright position. Make sure
vacuum cleaner is turned o
while attaching tools.

QUICK START GUIDE6 FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT 7
HOW TO MAINTAIN
BRUSHROLL
HOW TO
MAINTAIN FILTER
• Step on handle release
to lower handle.
• Turn vacuum face down on oor.
• To avoid unnecessary service
calls, check brushroll for debris.
• Use scissors to clip heavy
threads or strings.
Caution: Make sure vacuum
is turned o and power
cord is unplugged.
Close cover and twist collar
to lock.
Grasp collar and twist to unlock
cover. Li cover up.
With cover open, use ngers
or small brush to clear
accumulated pet hair
from bristles.
Click!
Click!
Grip tabs and li out lter screen.
Twist bottom of lter screen
counterclockwise to unlock and
pull apart. Shake o dust. Rinse
screen and dust cup. Dry all
thoroughly. Reassemble screen,
twist clockwise to lock.
Pull dust cup latch to li up
dust cup lid.
Li out foam lter and
shake o dust. Rinse
foam lter and
dry thoroughly
Close cover until it clicks.Align tab on lter screen with
slot on back of dust cup and
drop into position.
Reinstall foam lter
Clean dust cup fi lters monthly
Warning: Never operate vacuum cleaner without
foam lter, lter screen and dust cup in proper position.

Bring it home.TM