eLICHENS AVOLTA User manual

Green LED
Device status Device trouble Gas alarm
Orange LED Red LED
• 10+ years lifespan
• Replaceable
Temperature &
Humidity sensors
Battery operated
• NDIR eLichens
gas sensor
• 3 alarm thresholds
(configurable)
Detection Test Button
• Device config
• Alarm test
Alarm / Speaker
• Sound level
(85dB)
• Pre-recorded
Alert message

Green: Device statusPower
Trouble
Alarm
• Blinks 1 time every 10sec when battery is low
Orange: Device trouble
• Blinks 2 times every 10sec when the device is on end of life mode
• Blinks 3 times every 10sec when the device is having an issue
Red: Gas alarm
• Blinks every 10sec when gas concentration is above threshold
• + Pre-recorded message on speaker every minute
Battery test
• Blink the green LED 3 times
Alarm test
• Beep + Pre-recorded voice message + red LED blinking
sec
1
sec
10
• Green LED blinks every 10sec during starting sequence
Before each installation please reconnect the battery
then press TEST button for 10 sec.

Avolta User Manual
Avolta Datasheet
Get access to : SCAN THIS
QR CODE
or click on this link
elichens.com/avolta-start
Visit elichens.com for more information or contact us at [email protected]
Keep Avolta in a methane-free environment
during the 12 min warm-up.
wait
12
Unscrew Plug-in Close & tighten
Green LED blinks every 10sec
during starting sequence
+ Beep