Elinz BCPBFAST10 User manual

Instructions
Welcome to use this product, this product supports QC3.0, PD2.0 and 10W wireless charging.
1. Charge the power bank:
(1) Use 5V2A charger to charge through MicroUSB interface;
(2) Use QC3.0 charger that supports 9V2A or 12V1.5A to quickly charge through MicroUSB
interface;
(3) Use the PD2.0 charger that supports 9V2A or 12V1.5A to quickly charge through the TypeC
interface;
2. Charge your mobile phone or other devices:
(1) Charge the device through the MicroUSB interface 5V2A mode;
(2) Use the QC3.0 mode of 9V2A or 12V1.5A to quickly charge the device through the
MicroUSB interface (requires the device to support QC3.0);
(3) Use the PD2.0 mode of 9V2A or 12V1.5A to quickly charge the device through the TypeC
interface (requires the device to support PD2.0);
(4) Charge the device via wireless charging 5W or 10W mode;
3. Product Specifications:
Capacity
10000mAh
Micro Input
DC 5V/2A
Type-C Input/Output
DC 5V/3A 9V/2A 12V/1.5A (MAX 18W)
USB Output (QC3.0)
DC 3.6V-12V
Wireless Output
10W/7.5W/5W
Wireless Distance
0-8mm
Power Display
Yes
Efficiency
More than 75%

Note: The output will drop to 5V when two devices are connected at the same time.
4. Packing List:
(1) Power Bank*1PC
(2) 1m MicroUSB Cable*1PC
(3) User Manual*1PC
5. Safety Precautions:
a. Please do not drop this product from a height, otherwise it may cause damage to the
product;
b. Please do not hit or disassemble this product, otherwise it may cause product damage;
c. Please do not place this product in fire or water, otherwise it may cause product damage;
d. Please use the correct charger according to the instructions, otherwise it may cause damage
to the product;
e. The mobile phone cannot be more than 8mm away from the mobile power during wireless
charging.
Warranty
1 year