Elinz BCPBPD23 User manual
Page | 1
USER MANUAL
BCPBPD23
Page | 2
GENERAL INFORMATION
The BCPBPD23 is a 30,000mAh Lithium-Polymer power bank
that supports up to 22.5W fast charging function, (PD3.0 and
Quick Charge 3.0). You can quickly charge your mobile
phone and have enough power left to charge other devices.
It also has a functional flashlight to help you in certain
situations. This power bank can charge up to three devices
simultaneously.
CHARGING THE POWER BANK
Before using the wireless power bank for the first time,
please charge the power bank fully. We recommend a
USB Adapter that supports 5V/3A to charge through the
Type-C USB interface. USB Adapter is not included.
To utilize the fast-charging feature, it is recommended to
use a PD3.0 charger that supports 9V/2A or 12V/1.5A to
quickly charge through the Type-C USB interface. A green
lightning indicator will light up next to the battery level
indicator.
Page | 3
CHARGING YOUR MOBILE DEVICE WITH THE POWER BANK
Use the Type-A USB port that supports QC3.0 through
9V/2A or 12V/1.5A, maximum of 18W to charge your
devices quickly (requires the device to support QC3.0).
Use the Type-C USB port that supports PD3.0 through
9V/2A or 12V/1.5A, maximum of 20W to charge your
devices quickly (requires the device to support PD3.0).
The Type-A USB port also supports 5V/4.5A, max 22.5W
SCP to quickly charge HUAWEI mobile phones (the
HUAWEI mobile phone needs to support SCP and use the
original HUAWEI charging cable)
When multiple mobile phones are connected at the same
time, the output will be automatically adjusted for 5V
output.
This power bank supports the function of charging and
discharging, and the output will be automatically adjusted
to 5V output when charging and discharging.
Page | 4
LCD DISPLAY/BATTERY LEVEL
This power bank has a digital LCD display that shows
battery level from 0% - 100%. When it shows 0% and
flashing, this means that the power bank needs to be
charged.
BUTTON FUNCTIONS
Press the power button to display the check the battery
level percentage.
Press the power button twice to turn-off the battery
display.
Press and hold the power button for 3 seconds to turn-on
the LED flashlight and hold the button for 3 seconds again
to turn it off.
Page | 5
Type-A USB port
PRODUCT DETAILS
LED Flashlight
Type-C USB port
Micro USB port
LCD Battery Display
Power Button
Page | 6
IMPORTANT SAFETY PRECAUTIONS:
Please note the following precautions before initial use.
Failure to comply may be dangerous and cause damage to
your mobile devices.
• If the Power Bank does not respond once it is powered on,
the battery level may be low. Follow the instructions for
charging the Power Bank and check the LED battery capacity
indicator. The indicator will flash as the Power Bank begins
charging.
• Charge the power bank fully before initial use. The unit
only achieves maximum performance after 2 or 3 full
charging and discharging cycles.
• Always recharge the power bank in a well-ventilated area.
Do not leave the power bank in hot or cold places.
• Do not immerse the power bank in water or expose it to
moisture or weather conditions.
• Do not drop, knock, or shake the power bank. Rough
handling can damage the internal precision component and
its board.
• Keep the power bank away from children; this device is
not a toy. While charging, the power bank’s casing may
become warm, which is normal as the charging and
discharging processes generate heat.
• Keep the power bank away from fire or other sources of
heat.
Page | 7
• Exposing the power bank to high temperatures may cause
it to explode.
• Do not short-circuit the power bank, as this may cause
damage to the unit.
• Unauthorized changes or modifications may void your
right to use this product.
• While using the power bank, always comply with any
special regulations that may apply to the area you are in and
always turn off your mobile device when its use is
prohibited. For example: do not use the power bank during
flight, takeoff or landing, near medical equipment, as it may
cause interference or damage
MULTI-SAFETY PROTECTION
1. Over-charge Protection - Detects the state of the battery
and stops the charging process when the power bank is at
100%.
2. Short circuit Protection - Disables discharging if a short
circuit is detected.
3. Over-Voltage Protection - Disables charging when the
battery voltage goes above a safe threshold.
4. Over-Current Protection - Disables charging when the
battery current goes above a safe threshold.
5. Over-Discharge protection - Disables discharging when
the battery voltages goes below a threshold.
Page | 8
SPECIFICATIONS:
Battery Capacity 30000mAh
Micro-USB Input: 5V/2A 9V/2A 12V/1.5A
Type C Input: 5V/3A 9V/2A 12V/1.5A
Type C Output: 5V/3A 9V/2.2A 12V/1.67A
USB Output: 4.5V/5A 5V/3A 9V/2A 12V/1.5A
Max Power: 22.5W
PD 3.0: Support
QC 3.0: Support
Material: Aluminum
Colour: Black
Product Weight: 579 grams
Product Size: 144*39.2*67.1mm
PACKING LIST:
1x Power Bank
1x USB Type-C Charging Cable
1x User Manual
For questions, support, or warranty claims feel free to contact
or chat with us. www.elinz.com.au
Table of contents
Other Elinz Accessories manuals
