Elinz BCPBPD38 User manual

Page | 1
USER MANUAL
BCPBPD38

Page | 2
GENERAL INFORMATION
The BCPBPD38 Wireless Charging Power Bank is a
10,000mAh Lithium-Polymer power bank with a wireless
transmitter and rechargeable battery. This provides you
with the flexibility to charge your devices wirelessly or with
a charging cable whenever or wherever you go. This power
bank can charge up to four devices simultaneously,
including your Apple smart watch magnetic charging.
CHARGING THE POWER BANK
Before using the wireless power bank for the first time,
please charge the power bank fully. We recommend a USB
Adapter that supports 5V/3A to charge through the Type-C
USB interface. USB Adapter is not included.
To utilize the fast-charging feature, it's recommended to use
a PD3.0 charger that supports 9V/2A or 12V/1.5A to quickly
charge through the Type-C USB interface. A green indicator
will light up next to the battery level indicator.
When charging, the LED indicators will blink. Each light
indicates a 25% charge. When fully charged, all LED lights
will stop blinking

Page | 3
CHECKING THE REMAINING BATTERY POWER
Check the remaining battery power by pressing the power
button. The indicator lights alerts you to the remaining battery
power.

Page | 4
WIRELESS CHARGING MODES
To activate wireless charging mode for mobile phone, press
the power button turn the power bank on. The blue indicator
light will blink which means power bank is now ready for
wireless charging.
Place your wireless compatible smartphone onto the power
bank making sure it is centered on the wireless icon. Check
that the charging icon is displayed on your smartphone so you
can confirm wireless charging is working. You will also see a
solid blue indicator light indicating that it is wirelessly
charging your device.
This power bank supports 5W/7.5W/10W/15W wireless
charging. Many newer smartphones incorporate fast charging
technology that enables them to draw more power when
charging. Wireless charging speeds can increase when phone
manufacturers update their operating systems accordingly.

Page | 5
To guarantee that your phone will charge faster, you need to
use a cable.
To activate Magnetic charging mode for Apple smart watch,
you need to press and hold the power button for 3 seconds
until the blue light indicator blinks and stops.
Place your Apple Watch onto the power bank same as the in
the image above; the concave part of the power bank
magnetically snaps to the back of your Apple Watch and aligns
it properly. Check that the charging icon is displayed on your
smart watch so you can confirm wireless charging is working.
It will charge the smart watch wirelessly at 3W.

Page | 6
WIRED CHARGING
This power bank also supports wired charging through its
Type-A USB port. It uses 5V/4.5A (maximum of 22.5W) SCP
mode to quickly charge HUAWEI phones, the original HUAWEI
charging cable needs to be used.
It can charge up to 4 devices simultaneously, the output
would be automatically adjusted to 5V. This power bank
supports 3 fast charging protocols 1st one is Huawei's SCP
(Super Charge Protocol) 22.5W where it can supply 4.5V/5A
on some Huawei phone models, 2nd is PD3.0 20W (USB Type-
C interface) for iPhone and 3rd one is QC3.0 18W (USB Type-A
interface) for Android phones. Please note that charging
speeds will vary between phone models and manufacturers.

Page | 7
PRODUCT DETAILS
IMPORTANT SAFETY PRECAUTIONS
Please note the following precautions before initial use. Failure
to comply may be dangerous and cause damage to your
mobile devices.
• If the Power Bank does not respond once it is powered on,
the battery level may be low. Follow the instructions for
charging the Power Bank and check the LED battery capacity
indicator. The indicator will flash as the Power Bank begins
charging.
• Charge the power bank fully before initial use. The unit only
achieves maximum performance after 2 or 3 full charging and
discharging cycles.

Page | 8
• Always recharge the power bank in a well-ventilated area. Do
not leave the power bank in hot or cold places.
• Do not immerse the power bank in water or expose it to
moisture or weather conditions.
• Do not drop, knock, or shake the power bank. Rough
handling can damage the internal precision component and its
board.
• Keep the power bank away from children; this device is not a
toy. While charging, the power bank’s casing may become
warm, which is normal as the charging and discharging
processes generate heat.
• Keep the power bank away from fire or other sources of
heat.
• Exposing the power bank to high temperatures may cause it
to explode.
• Do not short-circuit the power bank, as this may cause
damage to the unit.
• Unauthorized changes or modifications may void your right
to use this product.
• While using the power bank, always comply with any special
regulations that may apply to the area you are in and always
turn off your mobile device when its use is prohibited. For
example: do not use the power bank during flight, takeoff or
landing, near medical equipment, as it may cause interference
or damage

Page | 9
MULTI-SAFETY PROTECTION
1. Over-charge Protection - Detects the state of the battery and
stops the charging process when the power bank is at 100%.
2. Short circuit Protection - Disables discharging if a short
circuit is detected.
3. Over-Voltage Protection - Disables charging when the
battery voltage goes above a safe threshold.
4. Over-Current Protection - Disables charging when the
battery current goes above a safe threshold.
5. Over-Discharge protection - Disables discharging when the
battery voltages goes below a threshold.
SPECIFICATIONS
Battery Capacity 10000mAh/37Wh
Type C Input: 5V/3A 9V/2A 12V/1.5A
Type C Output: 5V/3A 9V/2.2A 12V/1.67A
USB Type-A Output (QC3.0+SCP): 4.5V/5A 5V/3A 9V/2A 12V/1.5A
Wireless Output: 5W/7.5W/10W/15W
Max Power: 22.5W
PD 3.0: Support
QC 3.0: Support
Material: ABS Plastic
PACKING LIST
1x Power Bank
1x USB Type-C Charging Cable
1x User Manual

Page | 10
For questions, support, or warranty claims feel free to contact
us at 1300 881 773, send us an email at [email protected] or
chat with us. www.elinz.com.au