Elite Gourmet ETS-9053 User manual

COFFEE GRINDER
& SPICE MILL
INSTRUCTION MANUAL
Before operating your new appliance, please read all instructions carefully and keep for
future reference.
MODEL: ETS-9053
Questions? Elite's customer service team is ready to help.
Call us toll-free at 800-365-6133 ext. 120/105.
For more Elite products, visit us at www.maxi-matic.com.

2 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
IMPORTANT SAFEGUARDS
The Elite Brand takes consumer safety very seriously. Products are designed and
manufactured with our valued consumers’ safety in mind. Additionally, we ask that
you exercise a level of caution when using any electrical appliance by following all
instructions and important safeguards.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE
REFERENCE.
WARNING: When using electrical appliances, basic safety precautions should
always be followed as below:
1. When passing this device on to third
parties, this operating manual must
also be handed over.
2. This device complies with technical
standards and the relevant safety
requirements for electrical devices.
3. The manufacturer assumes no
responsibility for damages arising from
improper use or from failure to comply
with the instructions in this manual.
4. Before rst use, please check whether
the type and mains voltage match the
specications on the nameplate.
5. A residual current circuit breaker
with a residual operating current not
exceeding 30 mA in the house circuit
offers additional protection. Consult
an electrician for information on the
device and installation.
6. Use the device only for its intended
purpose.
7. This device is for indoor use only.
8. This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or by those with a lack
of experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
9. Risk of electric shock! Do not submerge
the product in water.
10. Do not use the device if it is damaged.
To avoid hazards, defective
components must only be replaced by
the manufacturer, its customer service
department or similarly qualied
persons.
11. Never transport the device during use.
12. Do not open the device. Do not insert
any foreign objects inside of the outer
casing.
13. Never touch the power plug with wet
or damp hands.
14. Do not operate this device with wet
hands or when standing on a wet oor.
15. Regularly inspect the power plug and
cord. If the power cord of this device
has been damaged, it must be replaced
by the manufacturer, the
manufacturer’s customer service or by
a similarly qualied person in order to
prevent hazards.
16. Prevent damage to the cable due to
squashing, bending or scufng on
sharp edges.
17. Lay the power cord out in such as way
that accidentally pulling on it or
tripping over it will not be possible.
18. Do not pull on the power cord when
disconnecting the plug from the power
outlet. Do not wrap the power cord
around the device.
19. When using an extension cord, make
sure it is suitable for the corresponding
power rating.
20. Always unplug the device when left
unattended, during disassembly,
assembly or cleaning.
21. The blades are sharp, exercise extreme
caution when cleaning.
22. CAUTION: The blades must be still
before opening the lid.
23. The blades may not be resharpened.
The blades were balanced exactly by
the manufacturer. If the blades are no
longer in balance, the device may be
damaged and pose a risk to the user.
24. Do not operate the device when
empty. This may damage the motor.

3
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
SAVE THESE INSTRUCTIONS.
THIS PRODUCT IS FOR
HOUSEHOLD USE ONLY.
SHORT CORD PURPOSE
POLARIZED PLUG
If the plug still does not t, contact a
qualied electrician. Never use the plug
with an extension cord unless the plug
can be fully inserted into the extension
cord. Do not alter the plug of the
product or any extension cord being
used with this product. Do not attempt
to defeat the safety purpose of the
polarized plug.
If this appliance is equipped with a
polarized plug (one blade is wider than
the other), please follow the below
instructions:
To reduce the risk of electrical shock,
this plug is intended to t into a
polarized outlet only one way. If you
are unable to t the plug into the
electrical outlet, try reversing the plug.
If an extension cord is used: (1) the
marked electrical rating of the extension
cord should be at least as great as the
electrical rating of the product; (2) the
extension cord should be arranged so
that it will not drape over the counter
top or tabletop where it can
unintentionally be pulled on or tripped
over by children or pets.
Note: A short power cord is provided
to reduce the risk of personal injury
resulting from becoming entangled in or
tripping over a long cord.
Longer power-supply cords or
extension cords are available and
may be used if care is exercised in
their use.

4 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
PARTS IDENTIFICATION
BEFORE FIRST USE
• Make sure all packaging materials are removed and check the device and
accessories for damages.
• Clean the device as described under Cleaning & Maintenance.
• Grind only coffee, nuts or spices in this appliance.
• When not in use and during cleaning, always unplug the unit.
• If the power cord is damaged, it must be replaced by manufacturer or its
service agent or a similarly qualied person in order to avoid a hazard.

5
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
BEFORE FIRST USE
1. Fully unwind the power cord from the cord storage, and
then guide it through the cord guide on the back of the
coffee grinder.
2. Turn the lid in opposite direction of the arrow marking
(open lock symbol), and then lift it up.
3. Fill the coffee receptacle with the desired amount of
coffee beans. Do not overll the receptacle!
4. Install the lid on the coffee grinder, and then turn it in the
direction of the arrow marking (closed lock symbol) until it
clicks into place.
5. Connect the power plug to an appropriate outlet.
6. Push the on/off button to start the coffee grinder.
7. Release the on/off button to stop the coffee grinder.
8. Turn the lid in opposite direction of the arrow marking
(open lock symbol), and then lift it up.
9. Remove the ground coffee. If the ground coffee is very
ne, it is possible for it to be sticky. Use the provided brush
to remove the ground coffee.
NOTE:
Coffee aroma is
affected by heat.
Operate the coffee
grinder within as short
intervals as possible
(max. 30 sec.) in order
to prevent generation
of heat.
CLEANING & MAINTENANCE
• Clean the coffee grinder regularly. Old ground coffee
residue inside the device can cause oxidation and
therefore adversely affect the coffee avor.
• Use a slightly damp cloth and, if necessary, a little bit of
mild cleaning agent to clean the casing. Make sure that no
liquid enters the device interior.
• Always dry the device after cleaning.
• Use the brush to clean the blades and the inside of the
coffee receptacle.
• Rewind the power cord using the cord storage.
• Store the coffee grinder at a dry, cool location protected
against moisture.
CAUTION:
DO NOT IMMERSE THE
MOTOR HOUSING IN
WATER
-
-
-
NOTE:
Unplug the device
before every cleaning.
Never submerge the
device in water or
other liquids.
Do not use alcohol,
acetone, benzine,
abrasive cleaning
agent, etc. to clean
plastic components.
Do not use any hard
brushes or metal
objects.
5