Elite ELITEPOB-600-2-0861 User manual

Contents List
ELITEPOB-600-2-0861
•Twin 90L pull-out – 2 x 45L
•Suits standard 600mm wide cabinet (external)
•Does not include integrated door mount
• 45kg weight limit
ELITEPOB-600-2-0861-D
•Twin 90L pull-out – 2 x 45L
•Suits standard 600mm wide cabinet (external)
•Includes optional door mount kit to attach frame to
cabinet door
•45kg weight limit
Models
Dimensions
(PRE-ATTACHED TO THE FRAME IN SOME MODELS)

Affixing door (Model ELITEPOB-600-2-0861-D only)
Mounting the cabinet door to the frame allows the bin set to slide out when the cabinet door is pulled out. The
optional door mount kit is included in the box.
Position door brackets Attach door to mount
•Affix each door mount to the bin frame using the three nuts and bolts pre-installed on each side of frame
front.
•Affix the door brackets to the back of the cabinet door so that they will align with the door mounts on
frame.
•Attach door mounts to the door brackets.
•If required, you can make horizontal, vertical and tilt adjustments to fine tune the alignment of the cabinet
door by loosening and tightening the screws/bolts as pictured.
Front of Cabinet
Mount frame to cabinet base