Elite REMOTECHIEF R800D User manual
Elite Learning Universal Remote Control –R800D
Thank you for your purchase the R800D universal remote control. It features the largest infrared code library for
American market.Based on our creative design, it has the easiest and fastest way to set up directly by the brand name
and code no, in its LCD screen even without the manual book later.
The R800D universal remote control almost all brands of Televisions (TV), DVD-players and DVR-players (DVD),
DVB receivers and (digital) Satellite receivers and Cable box (SAT), Video Recorders (VCR), Audio amplifiers and
LD-players and other Audio (AUX),Projector(PRO),Elite Projector Screen(just only for brand ELITE)(SCR).The R800D
universal remote control operates almost all main functions of your selection of devices.
You can use Auto Search to scan the code library in case of you can not find your device brand in the list.
Besides, R800D can learn a new code from an original remote control to supplement the codes in case of its shortage.
Show View function scans all channels for you to have a program quick view.
All off function can switch off all your devices with one button.
Macro function makes several sequent operations with one button for your home theater.
Volume lock can fix VOL+/VOL- button to control Amplifier only for your home theater.
Device lock can fix the device against changing by a new set up until you unlock it.
R800D has backlight for LCD screen and separate device backlight to show you the currently working device.
Low battery indication to remind you when need to replace batteries.
Light keys all the keys with fluorescence materials to help you to see all the keys clearly even in dark surround.
The R800D also has real time clock to show your time andAM or PM.
All the set up data will be stored in back up memory permanently, you don’t need to be worry about data loss when
you replace battery.
U
US
SE
ER
R
M
MA
AN
NU
UA
AL
L
E
EL
LI
IT
TE
E
L
LE
EA
AR
RN
NI
IN
NG
G
U
UN
NI
IV
VE
ER
RS
SA
AL
L
R
RE
EM
MO
OT
TE
E
C
CO
ON
NT
TR
RO
OL
L
S
SE
ER
RI
IE
ES
S:
:
R
RE
EM
MO
OT
TE
EC
CH
HI
IE
EF
F
M
MO
OD
DE
EL
L:
:
R
R8
80
00
0D
D
Elite Learning Universal Remote Control –R800D
All above mentioned functions show you R800D is an advanced, very powerful LCD universal remote control.
Please read this user manual carefully prior to using you new LCD remote control.
Device Code Assignment
Bank
for Device
Initial code
Total of codes
TV
TV
048
488
VCR
VCR
075
182
SAT
Satellite,Cable,DVB
075
403
DVD
DVD,DVR
026
190
SCR
Elite Screen
001
14
PRO
Projector
002
3(extend the codes by
learning function)
AUX1
AMP, LD,VCD
032
204
AUX2
AMP, LD,VCD
006
204
●Realizing the keys
Elite Learning Universal Remote Control –R800D
SET Start to set up (program) the remote control.
LEARN Setting up learning functions.
MACRO Sequent operation of your home theater.
TV, DVD, SCR(SCREEN),VCR, PRO(PROJECTOR),SAT,
AUX 1,AUX 2, Selecting the device which you want to control
Turning the device on and off
0-9 The number keys operate the same as on your original remote control,
and maybe also used for entering device codes when set up.
Works like the enter key on your original remote.
AV Works like the TV/Video key on your original TV remote, and
TV/SAT key on your original satellite remote A.B in cable and CD modes.
MENU Works like the Menu or OSD (on-screen display) or Memory
key on your original remote control.
CH+,CH- Works like the Channel Up and Down keys
on your original remote control.
VOL+,VOL- Control the volume like the Volume Up and Down
on your original remote control.
Mute To mute the sound
REW（fast reverse）
PLAY (operate your DVD, LD etc)
FFWD (fast forward)
REC (Record)
STOP (terminate your operation)
PAUSE
，OK，EXIT Works like the UP，DOWN，LEFT，
RIGHT，OK，EXIT keys on your original remote control for menu function.
DISPLAY display info on the selected channel.
ALL OFF turn off or turn on all devices by one button.
SHOW VIEW Scans all channels for your program quick view.
A,B,C,D,E,F,G,H Spare keys to store your learning command keys.
●Battery installation
This remote control needs 2 batteries to work with,please refer to the
direction marks inside the battery apartment and put 2 pieces of fresh AAA
in the battery apartment.Alkaline batteries are recommended.
To install the batteries:
1. Turn the remote over,pull up the tap and lift the cover off.
2. Insert the bateries matching the batteries to the (+) and (-) marks inside the battery case.
3. Slide the battery cover back into the place.
●Set Up(by Brand and Code) for ELITE SCREEN
1. Be sure already Fixing the Elite Screen OK,be sure the POWER is ON.
2. Press and hold the SET key on your remote control. Then press (simultaneously) the device key SCR..
Elite Learning Universal Remote Control –R800D
3. Then release them, the Elite Screen detailed type will be displayed on the screen.
4. You can press the or key to select the type of your device (e.g. your detialed type: ELITE 7U 01).
5. Press the OK key to save it. LCD shows SUCCESS and then finishes the set up.
5. Point R800D to the receiver window of screen control box and Press the or or OK(STOP) key to Check
the function .
● Set Up(by Enter Code) for ELITE SCREEN
1. Be sure already Fixing the Elite Screen OK,be sure have Switched on the Screen.
2. In the back section of this manual, find the elite screen detailed type and code number(e.g. ELITE 7E02).
3. Press the SET key on R800D for more than 3 seconds, then release it.
4. Press the or keys to select to CODE SETUP in the LCD menu, and press the OK key.
5. The screen shows the DEV SEARCH in the LCD menu, press the or keys to select to DEV SETUP
in the LCD menu, and press the OK key.
6. Then you press device key SCR on R800D and then press the OK key, you must now enter the 3-digit device
code (e.g. 006 for ELITE 7E02)
7. Press the OK key to save it and LCD shows SUCCESS, and press the device key SCR to exit the SETUP mode.
8. Please check the function of the keys UP,DOWN,OK(STOP) on R800D.
Elite Learning Universal Remote Control –R800D
Remark:
1. To return to beginning status, press the EXIT key or the device key (e.g. TV, or VCR…)
2. You must point your remote control to the device that you want to control during when you test the keys.
3. The keys of OK, EXIT only used to set-up your new remote control during set up. You can’t
control your device as normal menu function at this moment until you quit from set up.
4. If the device is locked, you must first unlock the device then setting up.
Elite Screen Brand
Brand
Code
ELITE 7E01 001
ELITE 7U01
002
ELITE 7E00 003
ELITE 7E04
004
ELITE 7E05 005
Elite Learning Universal Remote Control –R800D
ELITE 7E02
006
ELITE 7E07 007
ELITE 7E03
008
ELITE 7E08 009
ELITE 7E06
010
ELITE 7X01 011
ELITE 7X02
012
ELITE 7Y01 013
ELITE 7E09
014
●How to Replace your TV,DVD,VCR,AUX,SAT,PROJECTOR ORIGINAL Remote Control
You can replace your TV,DVD,VCR,AUX,SAT, PROJECTOR original remote controls with R800D by learning
function easily. That means you do not need to control your home appliance with many remote controls as before,but
only one remote control the R800D.
The LEARN feature is also used to supplement the preprogrammed code list. The standard code list may provide
most of the functions needed, but you can add additional special functions of your original remote control for your new
LCD remote control.
Or you can learn all functions of your original remote control to the keys on the LCD remote control you
want,and replace your original remote control.
In learn mode, you must need to prepare a another original remote control that you will take the codes into your
R800D.
You can select LEARN KEY to learn commands, or DELETE KEY to delete learnt commands, or choose DELETE
DEV to delete all commands under a device, or DELETE ALL for all learnt commands under all device in learn category.
You can enter into the learning mode to press and hold LEARN key for more than 3 seconds.
Learn a Command
1. Press a device key (e.g. TV) where you want to learn to.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Scroll or key to LEARNING in the LCD menu, then press the OK key.
4. Scroll or key to LEARN KEY in the LCD menu and then press the OK key. The LCD displays SELECT
KEY.
5. Select the (target) key on your R800D you want to learn (e.g. Power).
6. Point the transmitter of the original remote control remotes face to the receiver window of R800D by approximately
20mm(please notice the distance) apart.
Elite Learning Universal Remote Control –R800D
7. Press the POWER key on the R800D,the LCD displays WAITING ;Press and hold the original remote key (e.g.
Power) until the LCD displays SUCCESS for 1 second. If LCD displays FAILED, please Repeat Steps 4-6. Do not
shake your original remote control and R800D when in leraning process.
8. Repeat Steps 4-6 to learn more other keys.
9. Press a device key (e.g. TV) to quit the learn operation when all desired remote commands are learnt.
Power
IF NO
Press
a
source
key
from
original
remote
Remark:
1. A selected target key can be multi learnt from different sources key, R800D will store the final learnt signal only.
2. All usual function keys can be learnt except SHOW VIEW,ALL OFF,MACRO,DEVICE KEYS,LEARN etc..
3. Some code form may not be learn by this remote control (due to the material cost limit.)
4. You can learn about 100 key totally for 8 devices key.
Delete the Learnt Key
If you like to delete a learnt command, you can follow the steps as below:
Elite Learning Universal Remote Control –R800D
1. Press the device key (e.g. TV) where you like to delete commands from.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Scroll or key to LEARNING in the LCD menu, then press the OK key and the LCD display LEARN KEY.
4. Scroll or key to DELETE KEY in the LCD menu and then press the OK key.
5. Press the key on R800D that you want to delete, the LCD shows SURE DELET and then press the OK key to confirm,
the LCD will show SUCCESS .
6. Repeat Step 4 to delete next key you want.
7. Press a device key (e.g. TV) to quit the delete operation when all desired remote commands are deleted.
Select
a key
you
want
to
delete
IF NO
delete
next
key
Delete All Learnt Command For a Device
If you like to delete all learnt commands in a device with one order in stead of deleting every key one by one, please
follow the below steps:
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Scroll or key to LEARNING in the LCD menu, and then press the OK key and the LCD display LEARN KEY.
Elite Learning Universal Remote Control –R800D
3. Scroll or key to DELETE DEV in the LCD menu and then press the OK key.
4. You select device want to delete(e.g. DVD), press the device key DVD.
5. The LCD shows SURE DELET and then press the OK key, the LCD shows SUCCESS.
6. Repeat step 4-5 to delete commands in other device key.
7. Press EXIT key to quit deletes operation.
Select
a
device
you
want
to
delete
IF NO
Remark: sometimes it can take about 3 minutes for delete all commands in one device. If the commands are not many,
we suggest you delete commands one by one.
Delete All Learnt Keys
If you like to delete all learnt commands in the unit, please follow the below steps:
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Scroll or key to LEARNING in the LCD menu, then press the OK key, LCD shows LEARN KEY.
Elite Learning Universal Remote Control –R800D
3. Scroll or key to DELETE ALL in the LCD menu and then press the OK key.
4. The LCD shows SURE DELET, then press the OK,LCD shows SUCCESS to finish the deletion.
●Other Set Up
☆1: Direct Set Up (by Brand and Code) (suitable for TV,DVD,VCR,AUX1.AUX2,SAT)
1. Turn on the device (e.g. TV) you would like to operate. If it is a VCR, Please insert a tape.
2. Press and hold the SET key on your remote control. Then press (simultaneously) one of the device keys (e.g. TV)
3. Then release them, the Brand will be displayed on the screen.
4. You can press the or key to select the brand of your device (e.g. your TV brand: Philips)
5. Check the function of the keys(such as POWER,MUTE,VOL+,VOL-,CH+,CH-,DIGITAL KAYO,1,2,…9,etc). If none
of the keys of your new remote control can work, or most of the keys work improperly, please try another code by the
or key, then Check the function of the keys(such as POWER,MUTE,VOL+,VOL-,CH+,CH-,DIGITAL
KAYO,1,2,…9,etc). until all basic functions operate properly.
6. If you are satisfied with the code, just press the OK key to save it. LCD shows SUCCESS and then finishes the set
up.
Elite Learning Universal Remote Control –R800D
Remark:
1. To return to beginning status, press the EXIT key or the device key (e.g. TV, or VCR…)
2. You must point your remote control to the device that you want to control during when you test the keys.
3. The keys of OK, EXIT only used to set-up your new remote control during set up. You can’t
control your device as normal menu function at this moment until you quit from set up.
4. If the device is locked, you must first unlock the device then setting up.
☆2: Set-up by Auto Search (suitable for TV,DVD,VCR,AUX1, AUX2,SAT)
If the set-up by brand and code failed or you cannot find the brand name in your remote control screen, you may
use the Auto Search to find the correct code to operate your device.
1. Turn on the device (e.g. television) you would like to operate. If it is a VCR, Please insert a tape.
2. Press the SET key on your new remote control for more than 3 seconds, then release it.
3. the CODE SETUP will shown in the LCD menu, and press the OK key.
4. The screen shows the DEV SEARCH in the LCD menu, and press the OK key, then you press device key to
select your desired operation device(e.g. DVD) and poit the remote control to the device you choosed already,then
press the OK key to start the Auto Search.(you must point your remote control to your device at the moment)
5. See if the device reacts or not, once the device reacts, press any key to stop the search.
6. Test if most of keys work good or not. If most keys work not good enough, please step 4~5.
7. If you find one satisfied code please press the OK key to save it and LCD shows SUCCESS then show DEV
SEARCH. You can press device key (e.g. DVD) again to finish SET UP or use or to select other set up.
Elite Learning Universal Remote Control –R800D
+
Remark:
1. In case of you did not stop the search on time when device reacted, you may press the or key to search
back to find the passed code.(for example, your DVD reacts when the digital is 048 on the LCD, but you do not
press any key to stop the searching process synchronously, so the searching process goes on automaticaly. when
you press any key to stop the searching process,now the didital nember is already 050. Of course,when you press
the POWER or CH+…etc to control your DVD, your DVD will not react.But you can press the key one time,you
will see the digital number changes to 049,and press the POWER or CH+…etc to control your DVD, of cours your
DVD will not react again;and press the key one time again,you will see the digital number on the LCD changes
to 048,and press the POWER or CH+…etc to control your DVD, this time your DVD will react, then just press the
key OK to store it )
2.The keys of OK, EXIT are only used to set-up your new remote control during the Auto Search, you can’t
control your device for menu function at the moment until you quit from the set up.
3. When remote control searches through all codes, the remote control will stop at the beginning code of the search.
4. If the device is locked, you must first unlock the device then set up.
5. Please remember this digital number for your DVD control,because you can enter this digital number when
you use “SET-UP by inter code” quickly next time.
☆3: Set-up by Enter Code (suitable for TV,DVD,VCR,AUX1, AUX2,SAT)
1. Switch on the device, which you would like to control (e.g. TV set).
Elite Learning Universal Remote Control –R800D
2. In the process by “SET-UP by auto search”, you have found the digital number for your matched device,find
the brand code no of your device brand (e.g. Philips 001).
3. Press the SET key on your new remote control for more than 3 seconds, then release it.
4. Press the or keys to select to CODE SETUP in the LCD menu, and press the OK key.
5. The screen shows the DEV SEARCH in the LCD menu, press the or keys to select to DEV
SETUP in the LCD menu, and press the OK key.
6. Then you press device key to select your desired operation device(e.g. TV) and then press the OK key, you
must now enter the 3-digit device code (e.g. 001 for Philips TV)
7. Press the OK key to save it and LCD shows SUCCESS, and press EXIT key two times to exit the SETUP
mode.
8. You check the function of the keys on remote control(such as the POWER or CH+…etc). If most keys on your
new remote control do not function correctly, try another 3-digit device code (e.g. 004…) from the list under the
same brand. Repeat steps 3 to 7 until all the basic functions operate correctly.
☆4: Set up Clock
Elite Learning Universal Remote Control –R800D
You can set up the clock on your R800D LCD remote control and the clock will be displayed on the screen.
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the CONFIGURE in the LCD menu, and then press the OK key.
3. Press the or key to select the TIME SETUP in the LCD menu, and then press the OK key.
4. Press the or key to move the cursor to select hour or minute or AM/PM, then press the number key to
set hour and minute, and press the or key to select AM or PM.
5. Press the OK key to save the setting and LCD display SUCCESS for 1 second then exit to current setup state,
if you enter errors the LCD screen shows ERROR for 1 second. You can press any device key to finish set up or
press EXIT key return to the last state.
☆5: Volume Lock
This function makes you very convenient when you only use one device to adjust volume. For example, you may
Elite Learning Universal Remote Control –R800D
use your amplifier as your main volume control, then you can use this function to fix the volume and mute key of AUX,
no matter which device you will use (even you will use TV, DVD, VCR etc), the volume and mute key on remote control
still control the volume and mute of your amplifier.
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the CONFIGURE in the LCD menu, then press the OK key.
3. Press the or key to select the VOL LOCK in the LCD menu, then press the OK key.
4. Press the device key to select the device you want to fix, such as AUX.
5. Press the or key to change to the ON or OFF mode.
6. Press the OK key to save the setting and LCD display SUCCESS then to current setup state, You can press any
device key to finish set up or press the EXIT key to last state, or you can use or to select other set up.
Remark: You can only lock one device for volume and mute of your new remote control. The locked device will be
Elite Learning Universal Remote Control –R800D
unlocked when you lock on the other device automatically.
☆6:Device Lock
You can use Device lock function to fix current device code and this device code cannot be changed by brand and
code set up or auto search. You can set it to the “OFF” to quit from this function.
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the CONFIGURE in the LCD menu, then press the OK key.
3. Press the or key to select the DEV LOCK in the LCD menu, then press the OK key.
4. Press the device key to select the device that you want to fix, such as TV (or DVD, or SAT….)
5. Press the or key to change to the ON or OFF mode.
6. Press the OK key to save the setting and LCD display SUCCESS then exit to current setup state. You can press
any device key to finish set up or press the EXIT key to last state or you can use or to select other set up.
Elite Learning Universal Remote Control –R800D
Remark:
You can fix all device codes and these device codes cannot be changed by neither Auto Search nor Brand Code
Set up.
☆7: Background Light
If the background light is on, the background light will be lighted up when you press any key.
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the CONFIGURE in the LCD menu, and then press the OK key.
3. Press the or key to select the LIGHT in the LCD menu, then press the OK key.
4. Press the or key to change to the ON or OFF mode.
5. Press the OK key to save setting and LCD shows SUCCESS then exit to current setup state, You can press
any device key to finish set up or press the EXIT key to last state, or you can use or to select other set
up.
Elite Learning Universal Remote Control –R800D
☆8: Contrast Adjust
If you are not satisfied the screen contrast of your remote control, you can use below steps to change it.
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the CONFIGURE in the LCD menu, then press the OK key.
3. Press the or key to select the CONTRAST in the LCD menu, then press the OK key.
4. Press the or key to adjust contrast level, and then press the OK key when you satisfied.
5. Press the OK key to save the setting and the LCD shows SUCCESS then exit to current setup state, You can
press any devicekey to finish set up or press the EXIT key to last state, or you can use or to select other
set up.
Elite Learning Universal Remote Control –R800D
☆9:Show View Function
R800D has a Show view function to scan all TV or SAT channels for your quick view.
1. Press the device key to select the device (such as TV) that you want to operate.
2. Press and hold the Show View key about 1 second. When the device’s LED flashes and it goes into Show
View mode. The remote control automatically scans all channels for a brief quick view.
Remark:
1. The remote control must be pointed at the device until Show View mode finished.
2. If you want to exit the show view mode, please press any key.
☆10:ALL OFF
You can turn off (on) all devices by one button only and sometimes it’s convenient for you.
Elite Learning Universal Remote Control –R800D
Press and hold the ALL OFF key about 2~3 seconds and then release them. The remote control will send out all
current power signal to turn on(or turn off) for every device one by one. Meanwhile the device key flashes to tell you
which power signal is been sending.
Remark: The remote control must be pointed to device that you like to control until the operation finished.
☆11:Macro Function
Macro function let you make sequent operation for you home theater. Press and hold the MACRO key and digital
nember 1 key ( or 2,3 key), and then release them. The device LED will flash and the remote control will send out a
sequent IR commands that you programmed before.
You can set up a Macro by following below steps:
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select MACRO in the LCD menu, and then press the OK key.
3. Press the or key to select the MACRO1 in the LCD menu (or Macro2 or Macro3), then press the OK key.
4. The screen shows SETUP, and then press the OK key.
5. You can select the device and function key for a sequent operation that you like. (e.g.: TV+POWER+MUTE+AV,
DVD+PLAY, VCR+RECORD, etc. That means you want turn on the TV and shut off it’s sound, switch TV input to AV
port, at the same time DVD start to play disc, VCR begins to record )
6. Press the OK key to save the setting, LCD shows SUCCESS then exit to current setup state,
7. You can press any device key to finish set up or press the EXIT key to last state and use or to select
other set up.
Table of contents
Other Elite Remote Control manuals
