Elite ELITEPOB-400-217 User manual

www.ELITEKitchenStorage.com4
©4Copyright420154ELITE®4
Kitchen4Storage4Solu@ons4
Domes&que)40L)Twin)Slide)Out)
Concealed)Waste)Bin)
;)for)a)400mm)Cupboard)or)Under)Sink)Installa&on)
www.ELITEKitchenStorage.com4
©4Copyright420164ELITE®4
Kitchen4Storage4Solu@ons4
Contents List
ELITEPOB-400-217
• Twin 40Lpull-out – 2 x 20L
• Suits standard 400mm wide cabinet (external)
• Does not include integrated door mount
• Door mount kit can be purchased separately to affix
ELITEPOB-400-217-D
• Twin 40L pull-out – 2 x 20L
• Suits standard 400mm wide cabinet (external)
• Includes integrated door mount to attach frame to
cabinet door
Models
36.8cm
Minimum Dimension Requirements

www.ELITEKitchenStorage.com4
©4Copyright420154ELITE®4
Kitchen4Storage4Solu@ons4
Domes&que)40L)Twin)Slide)Out)
Concealed)Waste)Bin)
;)for)a)400mm)Cupboard)or)Under)Sink)Installa&on)
www.ELITEKitchenStorage.com4
©4Copyright420164ELITE®4
Kitchen4Storage4Solu@ons4
Affixing door
Mounting the cabinet door to the frame allows the bin set to slide out when the cabinet door is pulled out.
Alternatively you can install the bin and use a hinged cabinet door and pull the bin set out separately.
Position door brackets Attach door to mount
Model: ELITEPOB-400-217
• If you are not attaching a door then it is recommended you affix the part 6 nuts and bolts into the 3
mounting holes on each side of the frame for enhanced stability
• A door mount kit can be purchased and affixed to frame and mounted to door as per below
Models: ELITEPOB-400-217-D
• Affix the door brackets to the back of the cabinet door so that it will be in alignment (see diagram)
• Affix the door mount (attached to bin frame) to the door brackets (see diagram)
• Make horizontal, vertical and tilt adjustments to fine-tune the alignment of the door
Mount frame to cabinet base
Front of Cabinet