Elitech RCW-2000 User manual

iOS APP
Scan the QR code or
download on the App Store
Android APP
Scan the QR code or
download on the Google play
RCW-2000/2100/2200
USER MANUAL
Elitech cloud login: www.i-elitech.com

Overview
Technical Specification
The wireless temperature and humidity monitor system uses advanced LoRa communica-
tion technology and is consists of the wireless temperature and humidity sensors
RCW-2100/2200, the wireless gateway RCW-2000WiFi, Elitech app and Cloud platform etc.
By networking these products with various transmission methods of LoRa/Wi-Fi and combina-
tions
of Elitech app and cloud platform, the system allows users to not only view the
real-time data remotely but also view historical data and graphs, export data reports, ana-
1
RCW-2000 (Wi-Fi versions)
◆Power supply: 12V/2.5A(DC)
◆Communication mode: Wi-Fi
◆Alarm mode: LCD indicator, buzzer, SMS and APP notication
◆Maximum transmission distance: 1km at open space
◆Battery: Rechargeable lithium battery(5,000mAh capacity)
◆Maximum sensors loading number:
12 Wireless sensors (uploading intervals under 5 minutes)
30 Wireless sensors (uploading intervals over 5 minutes)
RCW-2100
◆Measurement range: Temperature: -30℃~65℃; Humidity: 10%RH~100%RH
◆Accuracy: Temperature: ±0.5℃; Humidity: ±5%RH
◆Memory capacity: 20,000 recording points
◆Record interval: 1 minute to 24 hours
◆Uploading mode: LoRa
◆
Battery: Two ER14335 lithium batteries (non-rechargeable)
◆Durations: Up to 1 year (uploading interval under 10 minutes) (@25℃)
◆Protection level: IP65
◆Operating frequency: 470~510 MHz ISM band

2
Status Indicator
Alarm Indicator
Battery Level
Humidity Values
Logging Points
Micro USB Charging Port
External Sensor Port
LoRa Signal
Time
Power ON/OFF
Temperature Values
Appearance
Alarm Indicator
Status Indicator
Net: Network Indicator
Status: Status Indicator
Power: Power Indicator
Reset
RCW-2200
◆Measurement range: Temperature: -30℃~65℃(SHT30), -150℃~150℃(PT100);
Humidity: 10%RH~100%RH
◆Accuracy: Temperature: ±0.5℃; Humidity: ±5%RH
◆Memory capacity: 20,000 recording points
◆Record interval: 1 minute to 24 hours
◆Uploading mode: LoRa
◆
Battery: Rechargeable Lithum batteries
◆Durations: Up to 1 year (fully charged, uploading interval under 3 minutes) (@25℃)
◆Protection level: IP64
◆Operating frequency: 470~510 MHz ISM band
RCW-2200
RCW-2000/2000WiFi RCW-2100

3
Indicator Status
RCW-2000 (Wireless Gateway)
(1) Power (Power Indicator):
Power ON: Solid green light;
Power OFF: Light o completely.
(2) Net (Network Indicator):
Wi-Fi connected: Green LED light always on.
(3) Status (Status Indicator):
Normal status: Green LED light blinks once per second;
Data uploaded: Green LED light continues to blink quickly.
RCW-2100/2200 (wireless sensor)
(1) Status Indicator:
Online: Green LED light blinks once every 5 seconds;
Oine: Green LED light blinks twice every seconds.
(2) Alarm Indicator:
Low battery: Red LED blinks twice every second.
Over limits: Red LED blinks once every minute (over temperature or humidity threshods).
(3) Optional GPS Function*:
Collect GPS information to realize GPS locating (outdoors only).
*Please contact us if you need this optional function.

4
iOS APP
Scan the QR code or
download on the App Store
Android APP
Scan the QR code or
download on the Google play
1.0 Download:
Please scan the QR code below or search Elitech on App Store or Google Play to down-
load Elitech app.
2.0 Login:
Click “Register now” to enter registration page. After nishing registration, please enter
your username and password to login to your account.
Login
Remember password
Register now Forgot password ?
Enter username
Enter password
Elitech App

①Click “ + ” rst.
5
Operation
1.0 The Gateway RCW 2000WiFi
Please follow the steps below to add and configure the gateway.
a. Match the provided two antennae with gateway’s antennae ports and install them cor-
rectly.
b. Plug RCW 2000Wi-Fi into a power outlet by using the provided power cord.
c. Press the power button on the side of the gateway to turn it on.
d. Use a pin or stick to press “Reset” hole to make sure it entered configuration mode.
Add Device
Device GUID
Device Name
GMT+08:00
Click the QR code on top right to automatically scan
and add.
Add
②Click “ ” and scan the QR
code on the back of the device.
Device
+
Search
Device
Alarm Project
More
No Devices Found
Enter Device Name or Model
③Type in device name, select
time zone and click “Add”.
Add Device
Click the QR code on top right to automatically scan
and add.
Cancel OK
(GMT-08:00) Anchorage
(GMT-07:00) Los Angeles
(GMT-07:00) Tijuana
(GMT-07:00) Phoenix
Add
564569584350391*****
2000 wifi
GMT+08:00
564569584350391*****
2000 wifi
GMT+08:00
Add Device
Click the QR code on top right to automatically scan
and add.
Add
Added successfully
The device scanned is a Wi-Fi device.
Would you like to set WiFi
Cancel OK
④“Added Succesfully” will shows.
Please click“OK”to continue.

6
Configure WiFi
Make sure your device is in config mode before any
operation. See details in User Manual.
jcrb_ior
jcrb123456
Entered Configuration
⑥When page shows “Conguration Successful”. Please click OK to nish all
conguration of the gateway.
f. Please connect your mobile phone to your prefered Wi-Fi network first. Then follow the
steps below to connect the gateway to Wi-Fi Network.
Note: If the Wi-Fi names shows on the conguration page is not your desired Wi-Fi, please
reconnect your mobile phone to your desired Wi-Fi network and repeat this step.
Add Device
Click the QR code on top right to automatically scan
and add.
564569584350391*****
Add
Configuration Successful
Please return to the device list
to continue
Cancel OK
2000 wifi
GMT+08:00
⑤The Wi-Fi’s name will be lled automatically on the “Congure Wi-Fi”
page. Please type in the correct Wi-Fi password and click “Enter Congura-
tion” button for next step.

7
② Click “ ” and scan the QR
code on the back of the
Add Device
Device GUID
Device Name
GMT+08:00
Click the QR code on top right to automatically scan
and add.
Add
① Click " " rst.
Device
+
Search
Device
Alarm Project
More
Enter Device Name or Model
No Devices Found
+
Click the QR code on top right to automatically scan
and add.
Add
Add Device
786568484350291*****
2100
GMT+08:00
③Click “Add” to add
sensor to your account.
b. Turn on sensor RCW-2100/2200 as shown below. Then sensor will automatically
search and connect to any nearby or available gateway. Once it has been connected,
sensor(s) will start uploading the real-time data automatically based on your setted
uploading intervals.
Press 3 seconds to
turn on sensor
Press 3 seconds to
turn on sensor
RCW-2100 RCW-2200

8
1.0 Login Cloud Portal
Please type in the URL http://www.i-elitech.com to login for more operation.
Click ‘Help’ to obtain cloud and app operation instructions.
Elitech Cloud

Elitech Technology. Inc.
1551 McCarthy Blvd Suite 112 Milpitas CA 95035
Sales Support: [e-mail]
Tech Support: [e-mail]
http://www.elitechlog.com
RCW-2100RCW-2200
RCW-2000