
3. Please follow the steps 1 to 8 below for WiFi configurations:
2.Add Device & WiFi Configuration
1. Connect your mobile phone with your preferred WiFi/WLAN network.
2. Open the Elitech App.
Device +
Query
Online
Search
Device Nema
Model
Sensor Data
GUID
EKW-3030
EKW-3030
1
94780240044317******
Device
Alarm Project
More
① Click ‘+’. ② Click and scan the
QR code at the back
of the device.
③ Click ‘Add’ and
the device will be added.
Add Device
Add
Device GUID
Device Name
Click the QRcode on top right to automatically
scan and add.
Add Device
Device Name
2712586328626513****
Add
Click the QRcode on top right to automatically
scan and add.
添加
27125863286265135415
设备名称(不是必填项)
注:点击右上角二维码自动扫描添加
Add device success
The device scanned is a
WiFi device, would you
like to set WiFi?
Cancel OK
④ Click ‘OK’.
Add Device
WiFi Configuration
→
Device has already in config mode,go !
wlw
Make sure your device is in config
mode before any operations. See
details in User...
Please input Wi-Fi password
!
Device has already in config mode,go !
Make sure your device is in config
mode before any operations. See
details in User...
Please wait
Cancel
Make sure your device is in config
mode before any operations. See
details in User...
Please wait
Cancel
ACCF238E630is connecting WIFI.
WiFi Configuration
Make sure your device is in config
mode before any operations. See
details in User...
WiFi is configured
WiFi is configured. Go
back to Device for more
operation.
OK
⑦ Wait for WiFi
settings.
⑧ Click ’OK' to finish
all WiFi configuration
procedures.
⑤ Enter WiFi
password.
⑥ Wait for WiFi
settings.
4. Please repeat step 3 and step 4 for reconfiguration if the configuration failed or change of Wifi
network is needed.
TEMP :
Wating
26.5℃ ℃
18:00
HUM : 27.5℃ ℃
20000