Elkay EWMA4820SACMC User manual

Model A B C D E F G H I J
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
EWMA4820 48 1219 20 508 45 1143 161/2419 24 610 40 1016 10 254 4 102 12 305 8 203
1"
(25mm)
7/16" (11mm) x
3/4" (19mm)
SLOT
STAINLESS STEEL BRACKETS
6-3/8"
(162mm)
5-3/8"
(137mm)
1-1/2"
(38mm) O.D.
I
9-1/4"
3-1/4" (83mm) DIA.
FOR LK18B DRAIN
1/4" R
(6mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
2"
(51mm)
A
C
E
DB
E
1/4" R
(6mm)
9-1/8"
(232mm)
36" (914mm)
SUGGESTED
FLOOR TO
RIM HEIGHT
E I
13-3/4"
(349mm)
7-3/4"
(197mm)
1-1/2"
(38mm)
4-1/4"
(108mm)
G
J2"
(51mm)
2" (51mm)
BACK
14"
(356mm)
1-1/4"
(32mm)
DIA.
2 HOLES
1-1/2"
(38mm) 2-3/4"
(70mm)
1"
(25mm)
F
• •
• • •
G GG
H H •
8-11/16"
(221mm)
7-11/16"
(195mm)
1/2"
(13mm)
7/16" (11mm)
DIA. HOLE
WALL HANGER
5/16" (8mm) DIA.
6 HOLES
WALL
HANGER
3-1/2"
(89mm)
G
J
2"
(51mm)
7-3/4"
(197mm)
21-1/2"
(546mm)
21-1/2"
(546mm)
Two Station Wall Mounted Wash Sink
With Sensor Faucets, AC Powered
Models EWMA4820SACC,
EWMA4820SACMC and EWMA4820SACTMC
®
SPECIFICATIONS
GENERAL
EWMA4820 #14 gauge, type 304 (18-8) stainless steel two
station wash sink with 1/4" (6mm) radius coved corners. 1-1/2"
(38mm) wide sloping top channel rims, with 2" (51mm) flat
apron. Full length 10" (254mm) high backsplash. Rim corners
are square. Exposed surfaces are hand blended to a uniform
satin luster finish. Furnished with wall hangers and stainless
steel support brackets.
(CHECK MODEL SPECIFIED) MIXING
MODEL FAUCET DRAIN VALVE
EWMA4820SACC LK722AC (2) LK18B NONE
EWMA4820SACMC LK722AC (2) LK18B LK724 (2)
EWMA4820SACTMC LK722AC (2) LK18B LK723 (2)
LK722AC Sensor-operated, non-mixing (tempered water),
backsplash-mounted gooseneck faucet with adjustable sensor
eyes. A continuous beam is emitted from sensor. The sensor
faucet is activated by user placing hands under the spout.
Tempered water will flow as long as hands remain within sen-
sor range. When hands are removed, the water stops automat-
ically based on shut off delay settings. The sensor then resets
and is ready for the next user. AC powered, chrome plated -
solid brass body construction and 12-3/4" (324mm) high (bot-
tom of base to top of spout), 8-3/4" (222mm) from aerator to
base, 5-3/8" (137mm) reach C.P. spout with 2.0 gpm laminar
flow control on spout end. Includes vandal-resistant, water-
resistant sensor control module with armored vandal-resistant
control and power cables. 12V DC plug-in voltage adapter,
slow-closing piston operated solenoid valve, in-line filter with
clean out trap, and 3/8" (10mm) copper fittings for supply tube
furnished by contractor. Control circuit is solid state, has
Elkay Manufacturing Company 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2001 Elkay Mfg. Co.
(3/01) 3-41
www.elkay.com
Model EWMA4820SACC
DIMENSIONS
adjustable sensor range (6" [152mm] preset to 30" [762mm]),
shut off delay preset at 1 second and field adjustable to 2, 4 or
8 seconds, and automatic time-out feature (to prevent sink
overflow) is preset at 0 seconds and is field adjustable to 15, 30
or 60 seconds.
LK18B Stainless steel perforated grid strainer with 1-1/2"
(38mm) O.D. stainless steel tailpiece.
LK723 Anti-scald thermostatic mixing valve with nickel-plated
brass body 1/2" (13mm) SWT inlets and outlet connections,
check valves on inlets and a mixed temperature range of
80°- 120°F
. Certified under ASSE1016.
LK724 Mechanical mixing valve with C.P. brass body, 3/8"
(10mm) compression inlets and outlet connections, and check
valves on inlets.

ROUGH-IN DIMENSIONS
®
Elkay Manufacturing Company 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2001 Elkay Mfg. Co.
3-41 (3/01)
Two Station Wall Mounted Wash Sink
With Sensor Faucets, AC Powered
Models EWMA4820SACC,
EWMA4820SACMC and EWMA4820SACTMC
SINK
SINK
4"
(102mm) 4" (102mm)
10"
(254mm) 10" (254mm)
5"
(127mm) 5" (127mm)
12"
(305mm)
12"
(305mm)
WALL HANGER
16-15/16"
(430mm)
5-3/8"
(137mm)
18-1/16"
(459mm)
7/8"
(22mm)
43-13/16"
(1113mm)
(PROVIDES 36" [914mm]
FINISHED FLOOR
TO RIM HEIGHT)
5-7/16"
(138mm)
FINISHED FLOOR
NOTE:
ALL FASTENERS
SUPPLIED BY OTHERS
8-5/8"
(219mm) 4"
(102
mm)
4"
(102
mm)
4"
(102
mm)
4"
(102
mm)
1-5/8"
(41mm)
1-5/8"
(41mm) 23"
(584mm)
1/2" (13mm) IPS SUPPLY INLET
(4 PLACES)
1/4" (6mm) x 1" (25mm)
LONG SLOT (6 PLACES)
OUTLINE OF SINK
3/16" (5mm) x 5/8" (16mm)
LONG SLOT (4 PLACES)
7/16" (11mm) x 3/4" (19mm)
LONG SLOT (2 PLACES)
7/16" (11mm) DIA. HOLE
(2 PLACES)
1-1/2" (38mm)
IPS WASTE
NOTE:
USE TEFLON TAPE FOR
ALL WATER CONNECTIONS.
DO NOT USE PIPE DOPE.
FOR EWMA4820SACTMC
FOR EWMA4820SACMC
10-1/4"
(260mm) 5-3/8"
(137mm)
SINK
BACKSPLASH
MOUNTING
BOLT
MOUNTING
HARDWARE
2-1/2"
(64mm)
30"
(762mm)
MAX
SENSOR
3/8" (10mm) SUPPLY LINE
(NOT SUPPLIED)
SOLENOID VALVE
IN-LINE FILTER
NYLON WASHER
8-3/4"
(222mm)
LK724 – MANUAL
MIXING VALVE
TEMP.
ADJUST
STOP VALVES,
FITTINGS &
3/8" (10mm)
SUPPLY LINES
(NOT SUPPLIED)
COMPRESSION TO SWEAT
ADAPTER 3/8" (10mm) x 1/2" (13mm)
(3-REQ’D) & 1/2" (13mm) SUPPLY
TUBE (NOT SUPPLIED)
90 DEGREE ST. EL.
(2 REQ’D) NOT SUPPLIED
STOP VALVES, FITTINGS
& 3/8" (10mm) SUPPLY LINES
(NOT SUPPLIED)
LK723
THERMOSTATIC
MIXING VALVE
TEMP.
ADJUST
LK728
12V PLUG-IN DC ADAPTER
W/20" (508mm) SHIELDED LINE
OUTLET LOCATION BY OTHERS
(POWER SUPPLY MUST BE
INSTALLED PER LOCAL CODES)
LK726
LAMINAR
FLOW CONTROL
2.0 GPM
CONTROL BOX