Elm Plus EPL1007 User manual

Assembly Instruction
DINING TABLE

1
Washer (D)
Wrench (H)
Spring Washer (E) Nut (F) Nut Cap (G)
HARDWARE LIST
PRE-ASSEMBLY PREPARATION
WARNING! DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT
• Please read through this instruction before beginning assembly.
• Two adults assembly is recommended.
• Clear out the space for assembly and lay out all parts base on Parts List, extra room will allow you to easily
determine if all the pieces are present.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
•
Keep small parts and pieces away from children until fully assembly.
• Do not fully tighten the bolts until all have been inserted and hand tightened.
• Please check for any loose screws and tighten them before use.
PANEL AND FITTINGS IDENTIFICATION
Table Top (A) Leg (B) Panel (C)
Qty: 4Qty: 1 Qty: 4
Qty: 12Qty: 12
Qty: 1
Qty: 12 Qty: 12

Step 1
Attach 4 Legs (B) to backside of Table Top (A) by using Washer (D), Spring Washer (E)
and Nut (F). Do not make all bolts tightened or put Nut Cap (G).
Step 2
Connect 4 Panels (C) to 4 Legs (B) by using Washer (D), Spring Washer (E) and Nut (F).
A
B
D
E
F
GH
C
B
DEFG
H
D X 4 E X 4 F X 4 G X 4
D X 8 E X 8 F X 8 G X 8

Step 3
Finally put Nut Cap (G) until all parts have been connected and bolts are tightened.