Furniture of America CM-BK657 User manual

GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PT)
VERSION # 21-06-26

2 / 15
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

3 / 15
PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.

4 / 15

Align guardrails (#4) and back tube
(#7) to the HBs (#1,2), then secure by
using bolts (#H).

ASSEMBLY INSTRUCTIONS
3
4
10 / 15
Part #3 x 1pc
Hardware #E x 8pcs
Part #5 x 2pcs
Hardware #A x 1pc
Hardware #B x 16pcs
Hardware #J x 1pc
Part #8 x 1pc
Part #10 x 3pcs
Part #11 x 1pc
Part #6 x 2pcs
#6
#5
#12
#12 #10
#11
#10
#10 #3
Part #12 x 2pcs
Hardware #F x 4pcs
Hardware #J x 1pc
Align bedboards (#5,6) to
the bunk bed, then secure
by using bolts (#B).
1) Align tubes
(#10,11,12) to the HB
(#2) and HB (#3), then
secure by using bolts
(#E).
2) Align connection tube (#8) to the HB
(#2), then secure by using bolts (#F).
3) Align connection tube
(#8) to the back tube (#7),
then secure by using bolts
(#A).

1) Align frame (#9) to
the HBs (#2,3), then
secure by using bolts
(#C) onto nuts (#I).
2) Align connection tub (#8)
to the back tube (#7), then
secure by using bolts (#A).
3) Align connection tube (#8) to
the HB (#1), then secure by
using bolts (#B) onto nut (#I).
Align desk top (#13) to back tube
(#7), then secure by using bolts
(#A).

NOTE: STAIRS CAN BE INSTALLED ON EITHER SIDE
1) Align steps (#16) onto HB (#3), then
secure by using bolts (#D).
2) Align steps (#16) onto HB (#2),
then secure by using bolts (#E).
3) Align steps (#14,15) onto HBs (#2,3), then
secure by using bolts (#C).

14 / 15
L