Elm Plus HDPE User manual

Elm Plus, LLC
Assembly Instruction
HDPE ROUND COFFEE TABLE
AND SIDE TABLE

1
PRE-ASSEMBLY PREPARATION
WARNING! DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT
• Please read through this instruction before beginning assembly.
• Two adults assembly is recommended.
• Clear out the space for assembly and lay out all parts base on Parts List, extra room will allow you to easily
determine if all the pieces are present.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
• Keep small parts and pieces away from children until fully assembly.
• Do not fully tighten the bolts until all have been inserted and hand tightened.
• Pleasecheck forany loosescrews andtighten them before use.
PANEL AND FITTINGS IDENTIFICATION
HARDWARE LIST
Table Top (A)
Qty: 1 Qty: 4
TOOLS & MATERIALS NEEDED
Foot Panel（B）
Qty: 8
Screw（C）

Note: Do not tighten all screws until last step.
Note: Please tighten the screws before use.
STEP 1
Turn over Table Top (A) and then insert 4 Foot Panels (B) into the slots.
STEP 2
Attach each Foot Panel (B) to Table Top (A) by using 2 Screws (C).
C=8sets
A=1pc
B=4pcs
A
BC
C
C
C
C
C
B
A
B
B
B