Elmo ESD-HO1 User manual

ENGLISH
User’s Manual
INDOOR / OUTDOOR
Before attempting to connect or operate this product, please read these instructions completely.
Version 1.0
STANDARD
HOUSING

1
CONTENTS
PREFACE.............................................................................................................................2
FEATURES...........................................................................................................................2
PRECAUTIONS...................................................................................................................2
CONSTRUCTION...............................................................................................................3
INSTALLATION..................................................................................................................4
INSTALLATION FOR INDOOR ENVIRONMENT...................................................4
INSTALLATION FOR OUTDOOR ENVIRONMENT...............................................5
PCB CONNECTION.......................................................................................................5
PCB CONNECTION.......................................................................................................6
TERMINAL BLOCK DEFINITION.............................................................................6
APPENDIX...........................................................................................................................7
ACCESSORIES................................................................................................................7

2
PREFACE
The housing is designed for dome camera installation. There are two kinds of
installation types for this product. One is indoor environment use, the other is
outdoor environment use.
It supports AC24V and DC12V power input. Fan and heater built in for temperature
control. Sun shield is used to outdoor environment.
FEATURES
Housing Features
1. Clear Optical Cover.
2. Support AC24V and DC12V power input.
3. Fan and Heater built in.
Pendent Features
1. Straight ,Goose Neck Profile.
PRECAUTIONS
1. Handle the Optical Cover Carefully
Do not damage the optical cover. Deep scratches will interfere with the
auto-focus function.

3
CONSTRUCTION
1. Pendant
2. Sun Shield
3. Main Housing
4. Dome Camera
5. Dome Cover

4
INSTALLATION
INSTALLATION FOR INDOOR ENVIRONMENT
1. Pendant
2. Main Housing
3. PCB Frame
4. PCB
5. Heater Frame
6. Dome Camera
7. Dome Cover

5
INSTALLATION FOR OUTDOOR ENVIRONMENT
1. Pendant
2. Sun Shield
3. Main Housing
4. PCB Frame
5. PCB
6. Heater Frame
7. Dome Camera
8. Dome Cover

6
PCB CONNECTION
TERMINAL BLOCK DEFINITION
Pin Name AC24V Set DC12V Set
VG AC24V in : line2 DC12V in : GND
V_IN AC24V in : line1 DC12V in : +12V
12V DC12V output : +12V ( For Keyboard ; Max.400mA )
GND DC12V output Ground and Alarm Ground.
1 Alarm 1
2 Alarm 2
3 Alarm 3
4 Alarm 4
D+ RS-485 Differential Signal D+ ( Tx +)
D- RS-485 Differential Signal D- ( Tx - )
D+ Additional RS-485 Differential Signal D+ ( Tx +)
D- Additional RS-485 Differential Signal D- ( Tx - )
Remark :
1. Half-duplex mode is standard.
2. D+,D- are used to transmit and received commands. You need only two wires to
transmit and receive commands under half-duplex mode.
1. BNC Video Output
You can connect video
cable to monitor directly.
2. Terminal Block
Power, Control Signal
and alarm inputs.
3. 16 Pin Connector
Connect cable to dome
camera
4. 16 Pin Connector
Connect cable to external
box ( Optional )

7
APPENDIX
ACCESSORIES
Pendent ………………….……………………….…… 1 pcs.
Operation Manual …………………………………… 1 pcs.

1478 Old Country Road
Plainview, NY 11803
www.elmousa.com