ELNA EnVision 8006 Wiring diagram

Supplementary instructions elna

Dear Elna Customer:
Continuing Elna’s tradition for updating and revising our exceptional product line, we are
pleased to announce the following new features and stitches available on your new 8007
sewing machine.
Please use the 8006 instruction manual to understand your machine’s functions.
The operation of your machine has not changed, but includes these additional features.
NEW
NEW
NEW
NEW
The LCD panel now has a backlight for clearer visibility.
A needle thread sensor has been added. This screen will appear if the needle
thread breaks while embroidering:
Refer to page 48 of your instruction manual for rethreading instructions.
It is no longer necessary to press the Start/STOP key after the thread breaks.
The sensor will stop the machine automatically.
An electronic speed reducer lever.
<> _ —— “&
« iii Dp
To increase sewing speed, slide the lever to the right. To decrease sewing
speed, slide the lever to the left.
The Start/Stop key may now be used for all sewing modes. You must
disconnect the foot control to use the Start/Stop key. The machine begins
running slowly and will then run at the speed set with the electronic speed
reducer lever.
This replaces the information regarding the Start/Stop key found on page 9
of your instruction manual.

NEW The stitch package has been expanded — see new stitch package
illustrations on following page.
8006 8007
18 utility and decorative stitches 65 utility and decorative stitches
3 buttonholes 5 buttonholes
Corresponds to Found in Instruction
8006 Stitch # Manual on Page #
31-34
31
—— MEMORY CLEAR PROGRAM SELECTION
MEMORY) MEMOIRE EFFACER SELECTION PROGRAMME
SPEICHER LOSCHEN PROGRAMM WAHLEN
SIZE ALPHABET SELECTION FRAME POSITION
(S\GN0)} Tale AZZ] SELECTION ALPHABET @) POSITION DU CADRE
GROSSE ALPHABETAUSWAHL RAHMENSTELLUNG
PREVIOUS PAGE NEXT PAGE RETURN
PAGE PRECEDENTE | —j» }| PAGE SUIVANTE 4 )| RETOUR
VORHERIGE SEITE NACHSTE SEITE ZURUCK
WIDTH AND LENGTH NEEOLE UP/DOWN REINFORCED BUTTONHOLE = COLOR CHANGE 0 START POINT
=i LARGEUR ET LONGUEUR AIGUILLE EN HAUT / EN BAS BOUTONNIERE RENFORCEE CHANGEMENT DE COULEUR (ey POINT DE DEPART
BREITE
UND
LANGE
NADEL
OBEN
f
UNTEN
VERSTARKTES
KNOPFLOCH
FARBANDERUNG
=—)
ANFANGSPUNKT

wes ENU eey FJ C™| Traditional Sewing
¢ How to scroll the display screen
@ When you turn on the power switch, the
MENU screen is displayed.
(2) Press key.
The display screen shows ).
@ Press the ES) key to scroll through
screens (8) to@).
(To return to a previous screen, press
the key.)
@) Press the =) key to scroll directly
from screen G) to@.
Press the (J key to scroll directly
from screen @ to).
*Press the @—]or C™ key to return
to the MENU screen.
©
This replaces the information regarding
«How to select traditional sewing mode»
found on page 18 of your instruction manual.
http://www.elna.com A - 07.99 - Anglais n° 395730-62 @©eic Elna International Corporation Printed in Japan
834-839-005