Elo TouchSystems M60 User manual

Revision A
P/N E242557
www.elotouch.com
Quick Installation Guide
Elo M60 Mobile Computer
© 2021 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc..
America
800-ELO-TOUCH
Tel [phone]
[email protected]
Europe (EMEA)
Tel [phone]
[email protected]
Asia Pacific
Tel [phone]
[email protected]
Elo Technical Support
Online self-help: www.elotouch.com/support
Contents:
• Elo M60 Mobile Computer
• 18W AC-DC Adapter
• US/EU/UK Adapter plugs

Battery removal
Battery replacement
1. Remove the top over by
pulling up from notched area.
1. Slide battery under ledge at
front and tilt down at back side.
2. Remove screws (x3)
3. Pull door off.
2. Replace door.
3. Replace screws (x3)
Ambient Light Sensor
Camera and Flash
Function LED
SCR Slot
Power LED
Contactless pay area
(graphic on screen)
Power Button
MSR track
I/O Connector
USB-C
Function Button
Volume Down
Function Button
Volume Up
4. Tilt battery up at bottom
side and pull back to release
battery connector.
4. Replace the top cover.
Micro SD/Nano Sam card installation
1. Remove battery.
2. Pull out Micro SD card/Nano SAM holder.
3. Place SD cadr/Nano SAM with contacts facing down.
4. Replace holder.
Micro SD Nano SAM
Battery connector
Press down
on battery
connector

Revision A
P/N E242751
www.elotouch.com
Quick Installation Guide
Elo M60C Mobile Computer
© 2021 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc..
America
800-ELO-TOUCH
Tel [phone]
[email protected]
Europe (EMEA)
Tel [phone]
[email protected]
Asia Pacific
Tel [phone]
[email protected]
Elo Technical Support
Online self-help: www.elotouch.com/support
Contents:
• Elo M60C Mobile Computer
• 18W AC-DC Adapter
• US/EU/UK Adapter plugs

Battery removal
Battery replacement
1. Remove the top over by
pulling up from notched area.
1. Slide battery under ledge at
front and tilt down at back side.
2. Remove screws (x3)
3. Pull door off.
2. Replace door.
3. Replace screws (x3)
Ambient Light Sensor
Camera and Flash
Function LED
SCR Slot
Power LED
Contactless pay area
(graphic on screen)
Power Button
MSR track
I/O Connector
USB-C
Function Button
Volume Down
Function Button
Volume Up
4. Tilt battery up at bottom
side and pull back to release
battery connector.
4. Replace the top cover.
Micro SD/Nano Sam card + Nano SIM card Installation
1. Remove battery.
2. Pull out Micro SD card/Nano SAM + Nano SIM holder.
3. Place SD cadr/Nano SAM and/or Nano SIM with contacts facing down.
4. Replace holder.
Micro SD
Nano SIM
Nano SAM
Battery connector
Press down
on battery
connector