NOTE:
FAQ:
1)Default IP address of ip camera: 192.168.1.10,user name: super,
password: empty(no password)
2)Default gateway: 192.168.1.1
3)Submask: 255.255.255.0
4)DNS Server:0.0.0.0
5)PC and ip camera network parameter should be in same network
segment.
6)IP ADDRESS OF PC AND IP CAMERAS SHOULD ALSO BE SAME IP
ADDRESS PARAGRAPH, FOR EXAMPLE: ip cam default ip address is
192.168.1.10, then pc ip address should be among 192.168.1.0 to
192.168.1.255(any ip address among this 2 ip address is ok, exceed
192.168.1.10)
7)Gateway should be same,for example: ip camera default gateway is
192.168.1.1,then pc gateway should also be 192.168.1.1
8)if your pc network parameter and ip camera default parameter different,
then you have to change ip cameras parameters same like pc parameters
setting.You can use device manager to change it .
9)Please don’t change the port, other wise it will affect the setting of IP
camera.
1)Is there anyway to reset the IP camera ?/Do you have reset button on
this IP camera?
There is no reset button on all of our IP camera, please contact our
customer service team to get reset process.
2)Does it Support synology(NAS)?
Yes, Synology-------(Model:Generic_ONVIF Port:8899)
www.elpcctv.com