Eltek R3601-W2 User manual

Eltek R3601-W2
User Manual
Eltek R3601-W2
SFP Gigabit Ethernet WLAN 11n Gateway

R3601-W2
User Manual
Version: R3601-W2 V.1.2

Preface
Brief Introduction
This manual provides technical information on how to configure and operate
application for your R3601-W2 unit.
Chapter 1: Provides an overview of R3601-W2
Chapter 2: Introduces the product
Chapter 3: Introduces the configuration via WEB-based Management
Intended Audience
System administrators, Network engineers and Maintenance technicians.
Style Convention
Table 1 Style convention used in this manual
Style
Meanings
\
Multi-level catalogs or menus are separated by ‘\’
character. For instance “file\new\directory” means the
menu item “directory” in menu “new” which in turn in the
menu “file”.
Used to highlight important area in diagrams.
<>
Indicates the input data from operating terminal.
[]
Indicates one parameter configuration or a function.
{ XX | XX }
Indicates a syntax of CLI command options, multiple
command options in one “{}”, separated by “|”, means
exclusive single selection.
host(italic)
Indicates user specified parameters.
e.g. for command:
tftp host {get | put} {sys | cfg} filename
The host and filename should be replaced by user
specified real parameters, such as: tftp 138.0.0.1 get
sys sysfile.bin
Table 2 Convention for Mouse Operation
Operation
Meanings
Click
Press and release a mouse button quickly
Double click
Quickly press and release a mouse button twice
Drag
Press a mouse button and move the mouse
Table 3 Convention for Keyboard Operation
Style
Meanings
Ctrl + C
“+”means an operation which presses down several keys
in the keyboard in the same time. E.g. “Ctrl + C” means
press down the key of “Ctrl” and “C” in the same time。

Table of Contents
Eltek R3601-W2 ............................................................................... 1
1Overview.................................................................................... 1
2Product Introduction .................................................................... 2
2.1 Appearance............................................................................ 2
2.2 Packaging Content .................................................................. 3
2.3 Hardware Interface ................................................................. 4
2.4 Features ................................................................................ 4
2.5 Working Environment .............................................................. 5
3Configuration Introduction ............................................................ 6
3.1 Computer Configuration........................................................... 6
3.1.1 Windows XP.................................................................................................................. 6
3.1.2 Windows Vista-32/64 ............................................................................................... 7
3.1.3 Windows 7-32/64 ...................................................................................................... 9
3.1.4 Windows 8-32/64 .................................................................................................... 10
3.1.5 Mac OS X 10.6 .......................................................................................................... 12
3.2 Device Configuration ..............................................................13
3.2.1 Connecting via Ethernet WAN............................................................................. 13
3.2.2 Connecting via Fiber WAN.................................................................................... 14
3.2.3 Web Configuration................................................................................................... 15
3.2.4 Access to the Eltek R3601-W2 configuration................................................ 16
3.3 Home ...................................................................................17
3.4 Network Configuration............................................................17
3.4.1 Network Status......................................................................................................... 17
3.4.2 WAN Configuration.................................................................................................. 18
3.4.3 LAN Configuration.................................................................................................... 25
3.4.4 WLAN............................................................................................................................ 28
3.4.5 3G Modem .................................................................................................................. 35
3.4.6 Port Management..................................................................................................... 37
3.4.7 IPv6 Configuration................................................................................................... 39
3.5 Data Service .........................................................................40
3.5.1 Status........................................................................................................................... 40
3.5.2 DHCP Server.............................................................................................................. 42
3.5.3 NAT Config.................................................................................................................. 44
3.5.4 Firewall Config .......................................................................................................... 48
3.5.5 QoS................................................................................................................................ 61
3.5.6 DDNS............................................................................................................................ 68
3.5.7 VPN................................................................................................................................ 69
3.5.8 Routing ........................................................................................................................ 79
3.5.9 Advanced Parameters ............................................................................................ 83
3.5.10 Multicast .................................................................................................................. 84
3.5.11 USB Storage........................................................................................................... 85
3.6 System.................................................................................86
3.6.1 Time Management................................................................................................... 86
3.6.2 Upgrade ....................................................................Fehler! Textmarke nicht definiert.

3.6.3 Reboot System ......................................................................................................... 89
3.6.4 Backup/Restore ........................................................................................................ 89
3.6.5 Diagnostic ................................................................................................................... 89
3.6.6 User Management.................................................................................................... 91
3.6.7 System Log ................................................................................................................ 92
3.6.8 TR069 ........................................................................................................................... 93
3.6.9 Choose the menu System→TR069 to load the following page. ............. 93
3.6.10 SNMP......................................................................................................................... 95
3.6.11 User Access Right ................................................................................................ 96
3.7 Apply ...................................................................................97
3.8 Print Function........................................................................98
4Troubleshooting .......................................................................102
5Declaration of Conformity ..........................................................108

Eltek R3601-W2 User Manual v.1.2 1
1Overview
The Eltek R3601-W2 is a SFP (Fiber) Gigabit Ethernet Wireless 11n Gateway. The
Eltek R3601-W2 is perfectly fitting for SoHo, SME or extended networks.
The device provides carriers and users with accelerated access to next-generation
network services including internet and intranet access, as well as web-based
research, videoconferencing, gaming applications, e-commerce, IPTV, web hosting
and many more functions.

Eltek R3601-W2 User Manual v.1.2 2
2Product Introduction
2.1 Appearance
Figure 2-1 R3601-W2 Front View
Table 2-1 LED
LED
Status
Indication
PWR
Off
Power is off
Solid Green
Device is running
INTERNET
Off
Power is off
Slow Flash Green
INTERNET type WAN PPPoE
connection authenticate failed
Solid Green
INTERNET type WAN connection is up
SFP
Off
No optical signal is detected
Solid Green
Optical signal is detected
WAN
Off
No Ethernet signal is detected
Flash Green
User data going through Ethernet
port
Solid Green
Ethernet interface is ready to work
LAN1~LAN4
Off
No Ethernet signal is detected
Flash Green
User data going through Ethernet
port
Solid Green
Ethernet interface is ready to work
WLAN
Off
WLAN is off
Flash Green
User data going through WLAN
Solid Green
WLAN interface is ready to work
VPN
Off
No VPN connection
Solid Green
VPN is established
3G
Off
NO Dongle connection
Solid Green
3G/4G connection is established

Eltek R3601-W2 User Manual v.1.2 3
Figure 2-2 R3601-W2 Rear View
WAN: 1000/100/10Mpbs ethernet ports.
LAN: 1000/100/10Mpbs ethernet ports.
SFP: Gigabit fiber interface.
SD: Interface for SD card. (optional)
POWER: DC power input connector.
Reset button: Use the button to restore the device to the factory defaults.
WPS: WIFI WPS switch.
2.2 Packaging Content
Following items are included in the R3601-W2 packaging content:
Packaging Content
1x R3601-W2
SFP Gigabit Ethernet WLAN 11n Gateway
1x Power Adapter
AC Adapter, 12VDC / 1A, Model: JY-12100.
1x Ethernet cable
CAT5, UTP (unshielded twisted pair), Color yellow
(TR-068), Cord grip connectors, Connector both
side with RJ45 –8/8 PIN, molded, length 2m
1x QsG
Printed Quick start Guide
Please note that there is no driver needed for the devices, therefore a CD-ROM is not
necessary and not part of the packaging content.

Eltek R3601-W2 User Manual v.1.2 4
2.3 Hardware Interface
Table 2-2 Hardware interface
LAN
4 100/1000BASE-T ports
WAN
1 FE ethernet port or 1 GE optical port
WIFI
4 WIFI access point, support
802.11b/g/n
SFP
1 Gigabit fiber interface
USB
1 USB 2.0 port, use for storage or 3G
modem
2.4 Features
Data Network
WAN: 1xGE,1xSFP and 1xUSB port for 2G/3G USB Modem Connectivity
LAN: 2x10/100/1000 Mbps Ethernet Port
WAN Access Mode: Static IP address, PPPoE, DHCP, PPTP and L2TP
Networking Interface: Multi WAN, Bridge Mode, 802.1Q
QOS: Destination/Source MAC/IP, Application, DSCP, Supports Bandwidth
Control
Advance Routing: Static Route, Policy Route, DNS Proxy, RIP
Internal Address Management: DHCP Server, IP and MAC Address Bind,
DHCP Relay
Networking-Protocols:
TCP/IP(IPv4/v6),UDP,RTP,SNTP,NAT,DHCP,DNS,DDNS,DLNA
VPN: IPSEC,PPTP,L2TP
IPTV: IGMP Proxy/Snooping, IPTV Bridge
Management
Management Protocol: CLI,SNMPV1/2,Tr069,Web
LED Indications: Total 12LEDS for Power, WAN/LAN, Phone
Control Button: WPS Button, WLAN Button, Power Switch, Reset Button
NAT & Firewall & Security
Supports ALG, DMZ, PAT
Firewall Protection: IDS&IPS, Block Ping/ICMP/IDENT, SPI Firewall, Portscan
restriction
Access control: Blocking by URL,IP Address, Mac Address, Protocol Type,
Port
WIFI WLAN
Standard: IEEE 802.11b/g/n(2.4GHz)
Security: WEP,WPA,WPA2,PWA-PSK,WPA2-PSK
WIFI Features: WMM,WLAN-LAN Isolation, Multi SSID(X4), AP Isolation

Eltek R3601-W2 User Manual v.1.2 5
Antenna Type: 2R2T
USB storage/Print
Support USB storage
Support print sharing
2.5 Working Environment
Environment requirement includes storage temperature, working temperature and
humidity.
Storage Temperature: -40ºC - 70ºC
Long Time Working Temperature: -10ºC - 50ºC
Short Time Working Temperature: -15ºC - 60ºC
Environment Humidity: 5% - 95% RH, no coagulation

Eltek R3601-W2 User Manual v.1.2 6
3Configuration Introduction
3.1 Computer Configuration
Before starting the Eltek R3601-W2 configuration, please kindly configure your
computer as below, to have an automatic IP address / DNS server.
To do this, you will need to configure your PC’s network settings to obtain an IP
address automatically. Computers use IP addresses to communicate with each
other across a network or the internet.
Find out which operating system your computer is running, such as Windows XP,
Windows Vista, Windows 7, Windows 8 or Mac OS 9.x, 10.x. You can find out by
clicking on Start -> Control Panel and double-click on the System menu.
Once you know which operating system you are running, follow the directions in the
corresponding step for your computer’s operating system.
The next few pages give you step by step instruction, how to configure your TCP/IP
settings based on the type of Windows or Mac operating system you are using.
3.1.1 Windows XP
1. Click on "Start" -> "Control Panel" (in Classic View). In the Control Panel, double
click on "Network Connections" to continue.
2. Single RIGHT click on "Local Area Connection", then click "Properties".

Eltek R3601-W2 User Manual v.1.2 7
3. Double click on "Internet Protocol (TCP/IP)".
4. Check "Obtain an IP address automatically" and "Obtain DNS server address
automatically" then click on "OK" to continue.
5. Click "Show icon in notification area when connected" then Click on "OK" to
complete the setup procedures.
3.1.2 Windows Vista-32/64
1. Click on "Start" -> "Control Panel" -> “View network status and tasks”.

Eltek R3601-W2 User Manual v.1.2 8
2. Click on "Manage network connections" to continue.
3. Single RIGHT click on "Local Area Connection", then click "Properties".
4. Double click on "Internet Protocol Version 4 (TCP/IPv4)".
5. Check "Obtain an IP address automatically" and "Obtain DNS server address
automatically" then click on "OK" to continue.

Eltek R3601-W2 User Manual v.1.2 9
3.1.3 Windows 7-32/64
1. Click on "Start" -> "Control Panel" (in Category View) -> "View network status
and tasks".
2. In the Control Panel Home, click on "Change adapter settings" to continue.
3. Single RIGHT click on "Local Area Connection", then click "Properties".
4. Double click on "Internet Protocol Version 4 (TCP/IPv4)".

Eltek R3601-W2 User Manual v.1.2 10
5. Check "Obtain an IP address automatically" and "Obtain DNS server address
automatically" then click on "OK" to continue.
3.1.4 Windows 8-32/64
1. Move the mouse or tap to the upper right corner and click on "Settings" and go to
"Control Panel".
2. Click on "View network status and tasks".
3. In the Control Panel Home, click on "Change adapter settings" to continue.

Eltek R3601-W2 User Manual v.1.2 11
4. Single RIGHT click on "Ethernet", then click "Properties".
5. Double click on "Internet Protocol Version 4 (TCP/IPv4)".
6. Check "Obtain an IP address automatically" and "Obtain DNS server address
automatically" then click on "OK" to continue.

Eltek R3601-W2 User Manual v.1.2 12
3.1.5 Mac OS X 10.6
1. From the Apple Menu, select System Preferences.
2. Click on the Network icon in the Internet & Network area.
3. From the Show pull-down select Built-in Ethernet.
On the TCP/IP tab, select Using DHCP from the Configure pull-down menu
4. On the PPPoE tab, make sure that the Connect using PPPoE check box is NOT
activated
Click Apply Now.
5. Close the Network window.

Eltek R3601-W2 User Manual v.1.2 13
3.2 Device Configuration
3.2.1 Connecting via Ethernet WAN
The Eltek R3601-W2 is a SFP Gigabit Ethernet Gateway. It cannot be connected to the
phone network, nor can it be used as an ADSL Router.
1. Connecting Internet
With a network cable connect the uplink to the WAN port on the back of the
device.
2. Connecting PC
Use the provided Ethernet cable (yellow), connect one end of the network cable to
any interface from “LAN1” to “LAN4” and connect the other end to the PC.
3. Connecting further PC’s or a digital receiver (STB)
Use another Ethernet cable (not provided in packaging content), connect one end
of the network cable to any free interface from “LAN1” to “LAN4” and connect the
other end to your other PC, digital receiver or any other network device.
4. Connecting Power Supply
Using the supplied power adapter, connect the power cord into the round interface
on the rear panel of device
5. Power-on
Turn on the device by pressing the power switch on the side of the device. After
switching on, the front panel Power LED lights.

Eltek R3601-W2 User Manual v.1.2 14
3.2.2 Connecting via Fiber WAN
The Eltek R3601-W2 is an SFP Gigabit Ethernet Gateway. It cannot be connected to
the phone network, nor can it be used as an ADSL Router.
1. SFP Slot and Fiber cable connection
1.1Put the SFP into the SFP slot on the back of the R3601-W2
1.2Connect the Fiber cable with the SFP module on the back of the device
WARNING:
- Please do not bend the fiber cable sharply. Use gradual and smooth bends to
avoid any damage on the glass fiber.
- Please do not remove the dust caps from unused fiber cables.
- To avoid signal loss, please do not touch the fiber connectors and their ends
and keep them always clean and free from dirt, debris and dust.
- Please do not look steadily at the fiber port when connecting the fiber,
because the invisible light may harm your vision.
2. Connecting PC
Use the provided Ethernet cable (yellow), connect one end of the network cable to
any interface from “LAN1” to “LAN4” and connect the other end to the PC.
3. Connecting further PC’s or a digital receiver (STB)
Use another Ethernet cable (not provided in packaging content), connect one end
of the network cable to any free interface from “LAN1” to “LAN4” and connect the
other end to your other PC, digital receiver or any other network device.
4. Connecting Power Supply
Using the supplied power adapter, connect the power cord into the round interface
on the rear panel of device
5. Power-on
Turn on the device by pressing the power switch on the side of the device. After
switching on, the front panel Power LED lights.

Eltek R3601-W2 User Manual v.1.2 15
3.2.3 Web Configuration
To configure the device via web browser, please make sure that your PC obtain an IP
address automatically as described in chapter 4.1.x (Computer Configuration).
Note: At least one properly-configured PC/Notebook must be connected to the
network (either connected directly to the LAN port of the device or through Wireless
LAN).
Connecting via LAN Port
Please refer to chapter 4.2.1/4.2.2 point 2 or just connect the Ethernet cable to the
LAN port of the Eltek R3601-W2 and the other end to the LAN Port of your computer.
Connecting via Wireless LAN
To connect the device through Wireless LAN, please proceed as follows:
1. Click on the Wireless icon at the bottom right corner.
2. Choose the Eltek R3601-W2 SSID to connect through the wireless network
(SSID shown on the label on the bottom of the device )
3. Please enter your WPA Key shown on the label on the bottom of the device
4. Your computer is now connected successfully with the Eltek R3601-W2
5. To proceed with the web configuration, please refer to the next chapter.