Eluxgo SPRAY MOP S6 User manual

Before using a new mopping cloth, it is recommended to wash it with water.
SPRAY
MOP S6

AHandle
BUpper tube
CLower tube
DStorage fluid bottle
ETray
Detachable joint
Firmly insert such that the
detachable joint fits into the hole
Hole
Insert
Mop handle 1 no
Mop tray 1 no
Storage fluid bottle
1 no
Mopping cloth
2 pcs
User guide 1 no
Packing Details
DESCRIPTIONOF EACH COMPONENT

Cloth pasting
Securing part for
mopping cloth
Step 1:
Insert one end of the
mopping cloth into the
slot that has been
opened for the securing
part in the tray;
Step 2:
Open the securing part
at the other end of the
tray, insert the other
end of the mopping
cloth into the slot that
has been opened for
the securing part;
Step 3:
Place the securing part
of the mopping cloth in
position and installation
is complete (cloth
pasting will naturally
adhere together);
45 degrees angle
of elevation
Perfect, comfortable
range of angle
User Guide:
Press against the arc-shaped handle
and a fan-shaped water mist will be
sprayed. Allow the floor to be slightly
damp. Push the mop forward in a 45
degrees angle of elevation; when the
water mist has been used up, continue
to repeat the process until the floor is
clean.
INSTALLATION DESCRIPTIONFOR A6 MOPPING CLOTH
USERGUIDE FOR A6

Prior to using this product, please read thoroughly the contents listed in this section
to avoid misusing the product, causing unnecessary inconveniences to your life.
● It is recommended to use water with an addition of a small amount of neutral
cleaning agent in the storage fluid bottle to produce the best effect for floor
mopping. To prevent the spray nozzle from clogging, do not use
corrosive fluid. After usage, pour 1/3 of water for spraying to clean spray nozzle.
● If it is not cleaned in a timely manner when non-neutral cleaning agent is used,
the handle may not recoil, or the spray mist effect is diminished. Pour 1/3 of
water in the storage fluid bottle and quickly press against the handle for spraying.
After cleaning the spray nozzle, the condition will be improved.
● Before using a new mopping cloth, it is recommended to wash it with water.
Do not use softener to wash mopping cloth.
● After using the mopping cloth,the dirt must be removed in a timely
manner and the mopping cloth left to dry. If the dirty substances are relatively
stubborn, you can add a bit of cleaning agent and use your hands to rub against
them.
● The internal structure of the mop is produced in a refined manner. It is not
recommended to dismantle it without prior approval in order not to affect its
operating efficiency.
There is a one-year warranty for free repair if the product is
operated in a normal manner according tothe manual, starting
from the day when the product is purchased. If the product
malfunctions under incorrect usage, the repair and maintenance
will be subject to appropriate fees on a case-by-case basis.
Purpose: Cleaning equipment
Please do not misuse this product
A6 OPERATING PRECAUTIONS
CARE AND MAINTENANCE