Emagra BUTTERFLY User manual

STEP 1
1. Take the seat out of the box
2. Take the backrest out of the box
3. Remove headrest, gaslift, base, casters, screws (1,4,5,6,7)
STEP 3
1. Insert 5pcs
of casters into
the base, then
insert gaslift
into the
opening in the
base
2. Insert the
gaslift into the
corresponding
hole in the
mechanism
STEP 4
1. Fasten headrest
to the backrest
STEP 2
1. Fasten backrest to
the mechanism
2. Tighten the screws
A- 3 pcs to a metal
plate which attaches to
the lower part of the
backrest
User guide
Maintenance and attention
1. The chair can only be used by one
person at a time.
2. Do not use the chair as a stool or
ladder.
3.Do not use the chair unless all
parts are properly assembled.
4.Do not use the chair untill all
screws are properly tightened.
5. If the chair is damaged by
external influences, do not use it
without expert repair.
6. For professional servis, please
contact us by phone [phone]
155, or by mail [email protected]
7. Screws
Model BUTTERFLY
A
M8x40
3 pcs
Backrest
1 pcs
IMBUS
Assembly instructions –model BUTTERFLY
https://www.emagra.cz/cs/m-390-kancelarska-zidle-butterfly
Used parts
(Note: Some parts may be different than images)
1.
Headrest
2.
Backrest
3.
Seat+mechanism+armrests
4. Base
5.
Gaslift
6.
Casters
c) Slide down d) Finished
a) Put on b) Click in

Using instructions - model BUTTERFLY
Lever for height
adjustment of
the chair
Locking button of
backrest position through
synchro mechanism.
The stiffness of the backrest
automatically
sets according to the weight
of the user.
www.emagra.cz
Lever for easy width adjustment of the
armrests
Button for height
adjustment of armrests
Button for depth seat
adjustment - to move the seat
forwards / backwards
The button is part of the seat
Headrest height and angle
adjustable
Height-adjustable backrest
system UP-DOWN
Lever for
easy width
adjustment
of the
armrests Button for height adjustment
of armrests
The gray wheel is used
to lock
back position (on / off)
The black (front) screw is used for
manual regulation of the mechanics
stiffness according to the user's
weight (+/-)
Optional mechanism D
Standard mechanism A