EFG 039170 User manual

039170 EFG Product development
The product contains one or more
of following materials: Metal, plastic,
wood, fabric, foam.
Mingle sofa
For more information, please visit efg.se.
ASSEMBLY INSTRUCTION 039170

For connecting modules use the connecting leg and the M8 screws.
Use the oval holes to tighten the modules.
End leg
M8
Connecting leg
with oval holes
Oval holes
For round corners add the smaller sledge leg and use the wooden screws.
Small sledge leg
Wooden screw
For combinations including a straight corner there will be one direction
where the legs can´t connect the modules. This connection will be done
with bolts and nuts. Use a sharp tool (knife) and make small cuts (x2 for
each module) in the fabric where you can feel the holes in the chipboard.
Then use the bolts and nuts to connect the modules.
Find the holes and make
a small cut for each hole
Use the bolts and
nuts to connect.
For Mingle with
divided seat and
back (crumb gap),
legs look like this.
Mingle assembly
For single sofas and combination ends, use the end leg and the M8 screws.