Emagra TAU User manual

STEP 1
1. Take the seat out of the box
2. Take the backrest out of the box
3. Remove headrest, gaslift, base, casters, screws (1,4,5,6,7)
STEP 3
1. Insert 5pcs of
casters into the
base, then
insert gaslift
into the
opening in the
base
2. Insert the
gaslift into the
corresponding
hole in the
mechanism
STEP 4
1. Fasten
headrest to
the backrest
STEP 2
1. Fasten backrest to
the mechanism
2. Tighten the screws
A- 3 pcs to a metal
plate which attaches to
the lower part of the
backrest
User guide
Maintenance and attention
1. The chair can only be used by
one person at a time.
2. Do not use the chair as a stool
or ladder.
3.Do not use the chair unless all
parts are properly assembled.
4.Do not use the chair untill all
screws are properly tightened.
5. If the chair is damaged by
external influences, do not use it
without expert repair.
6. For professional servis, please
contact us by phone [phone]
155, or by mail
[email protected]
7. Screws
Model TAU
A
M8x40
3 pcs
Backrest
1 pcs
IMBUS
Assembly instructions –model TAU
www.emagra.cz/cs/m-391-kancelarska-zidle-tau
Used parts
(Note: Some parts may be different than images)
1.
Headrest
2.
Backrest
3.
Seat+mechanism+armrests
4. Base
5.
Gaslift
6.
Casters
c) Slide down d) Finished
a) Put on b) Click in

Using instructions - model TAU
Lever for height adjustment of the chair
Push the lever towards the seat to activate
the gaslift.
Locking button of
backrest position through
synchro mechanism.
The stiffness of the backrest
automatically
sets according to the weight
of the user.
www.emagra.cz
Lever for
easy width
adjustment
of the
armrests Button for height adjustment
of armrests
Button for depth seat
adjustment - to move the seat
forwards / backwards.
The button is part of the seat.
Headrest height and angle
adjustable
The gray wheel is used
to lock
back position (on / off)
The black (front) screw is used for
manual regulation of the mechanics
stiffness according to the user's
weight (+/-)
Standard
independently
height-
adjustable
lumbar spine
support
Standard mechanism A
Optional mechanism D
Height-adjustable backrest
system UP-DOWN