Emagra X4 User manual

STEP 1:
1. Insert armrests to the seat
2. Be aware of the correct position of
the left and right armrests
3. Fasten the screws A x 6pcs
STEP 4:
1. Insert 5pcs
of casters into
the base, then
insert gaslift
into the
opening in the
base
2. Insert the
gaslift into the
corresponding
hole in the
mechanism
STEP 2:
1. Fasten mechanism to the seat
2. Tighten the screws B x 4pcs
STEP 5:
1. Fasten
headrest to
the backrest
2. Tighten the
screws Dx 2pcs
STEP 3:
1. Fasten backrest to
the mechanism
2. Tighten the
screws C x 3pcs
User guide
Maintenance and attention
1. The chair can only be used by
one person at a time.
2. Do not use the chair as a stool
or ladder.
3.Do not use the chair unless all
parts are properly assembled.
4.Do not use the chair unless all
screws are properly tightened.
5. If the chair is damaged by
external influences, do not use it
without expert repair.
6. This is a mechanical product
subjects to user stress, it is
necessary to check the chair
regularly and possibly tighten the
screws.
For professional servis, please
contact us by phone [phone]
155 or by mail [email protected]
9. Screws
Assembly instructions - model X4 seat with depth regulation
Used parts
(Note: Some parts may be different than images)
1.
Gaslift
2.
Casters
3.
Armrets
4.
Synchro mechanism
5. Seat
6. Base
7.
Backrest
8.
Headrest
Model X4 / armrests 3B
A
M6x30
6pcs
Armrests
B
M8x30
4pcs
Mechanism
C
M8x14
3pcs
Backrest
D
V3,5x18(20)
2pcs
Headrest
1 pcs
IMBUS

Using instructions - model X4 seat with depth regulation
4D adjustable 3B armrests
with softened polyurethane
foam on the touch part
Options of regulation:
height and width
forward / backward
rotatable left/right
Headrest adjustable
in height and angle
www.emagra.cz
Control for height regulation of chair
Control for synchro mechanism RS
Handle for regulation of mechanics stiffness according to users weight
Control for depth regulation of seat