SEI KA981500TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com
KA981500TX
KTTCHEN STORAGE TOWER
Assembly Instructions

A. Bottom Back Panel Quantity
of 1
B. Bottom Left Side Panel
Quantity
of 1
C. Bottom Right Side Panel
Quantity
of 1
D. Upper Back Panel Quantity
of 1
E. Upper Left Side Panel
Quantity
of 1
F. Upper Right Side Panel
Quantity
of 1
G. Shelf-Frame Quantity
of 3
H. Wire Shelf Quantity
of 1 J. Top Wire Shelf Quantity of 1
K. Small Wire Shelf Quantity
of 1
L. Wine Frame
Quantity
of 2
M. Left Side Iron
Quantity
of 2
N. Right Side Iron Quantity
of 2
O.Tube Quantity
of 2
P. Hook Quantity
of 4
Q. Wicker Basket Quantity
of 3
R. Wicker Basket Bottom Panel
Quantity
of 3
1
.
Bolt Quantity
of 48
1/4”*1-1/4”L
2. Short Bolt Quantity
of 18
1/4”*1/2”L
3. Allen Wrench Quantity
of 1
4
.
Wall brackets Quantity
of 2
5
.
Wall anchor Quantity
of 2
6
.
Nylon restraint strap Quantity
of 2
7.
Long
Wood screw Quantity
of 2
4.0*1”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or Parts.
Assembly Tool Required
No.2 Phillips Scre driver (Not Included)
KITCHEN STORAGE TOWER
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will
cause damage. Before beginning assembly, separate each type of screw. Carefully study the
screw
diagrams below
.
You may receive
extra
h
ardware with your
unit.

Figure 1
Assembly Instructions: Unpack
and lay parts on clean, padded
surface like carpet or blanket.
Check that you have all parts
indicated on the front page.
Insert Bolts(1) through holes on
Bottom Back Panel(A) to attach
both Bottom Side Panels(B,C).
Insert Short Bolts(2) through
holes on both Bottom Side Panels
(B,C) to attach Bottom Back
Panel(A), using Wrench( ).
Insert 16pcs Bolts(1) through
holes on both Bottom Side
Panels(B,C) to attach pcs Shelf
Frame(D) & 1pc wire shelf(E),
using Wrench( ).
Figure 2
Use Short Bolts(2) to attach
Upper Back Panel(D) to Bottom
Back panel(A). Tighten using
Wrench ( ).
Attach both Upper Side Panels
(E,F) to both Bottom Side Panels
(B,C) using 6pcs Bolts(1) and
2pcs Short Bolts(2). Tighten
using Wrench( ).
Insert 10pcs Bolts(1) through
holes on both Upper Side
Panels(E,F) to attach 1pc Top wire
Shelf(J) and 1pc Small Wire
Shelf(K). Tighten using
Wrench( ).
KITCHEN STORAGE TOWER
Assembly Instructions

Figure 3
Insert Bolts(1) through holes on side of
Upper Side Panels(E,F) to attach 2pcs
Wine Frames(L) to both Upper Side
Panels(E,F). Then insert Short
Bolts(2) through holes on Wine
Frames(L) to Small Wire Shelf(K)
.
Tighten using Wrench( ).
Please insert Short Bolts(2) through
holes on Side Irons(M,N) to attach to
both Upper Side Panels(E,F), and
Upper Back Panel(D). Tighten using
Wrench( ).
Please attach Tubes(O) between side
Irons(M,N). Tighten using Wrench
( ).
Hang Hooks(P) on Tubes(O).
Figure 4
Place Wicker Basket Bottom Panels(R)
into Wicker Baskets(Q).
Place completed baskets onto
Shelf-Frames(G).
KITCHEN STORAGE TOWER
Assembly Instructions

Figure 5
When properly installed, this hardware
can provide protection against
unexpected tipping of furniture.
Drill 2 holes in wall, insert 2pcs Wall
Anchors(5) into holes in wall.
Insert 2pcs Long Wood Screws(7)
through holes on Wall Brackets(4) into
Wall Anchors(5) to attach Wall
Brackets(4) onto Wall Anchors(5).
For each side, lace an end of the Nylon
Restraint Strap(7) through Wall
Bracket(4). Bring both ends of Nylon
Restraint Strap(7) together and slide
the beaded end of the strap through
the key hole shaped slot on the other
end. Pull down on the beaded end until
it snaps/locks into the keyhole.
Check to make sure the strap
is securely laced and locked to
the brackets.
No , your KITCHEN STORAGE
RACK is ready to use.
KITCHEN STORAGE TOWER
Assembly Instructions – Anti-Tipping Hardware

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019