EME Self-Monitoring Blood Glucose Meter User manual

EME
Self-Monitoring Blood Glucose System
User’s Manual
Please read this User’s Manual thoroughly
Before using your blood glucose meter

2
Dear EME SMBG System Owner,
Thank you for using the EME Self-Monitoring Blood Glucose (SMBG) System. We designed this system to be
dependable, easy-to-use, compact, lightweight and portable to help you monitor your blood glucose on a
regular basis.
Please read this manual thoroughly before you begin testing. This manual provides you and your diabetes
care team with important information and step-by-step direction to use the EME Self-Monitoring Blood
Glucose System.
Thanks again for choosing the EME SMBG.
Intended Use
The EME Self Monitoring Blood Glucose Test System is intended for the quantitative measurement of
glucose in fresh capillary whole blood samples drawn from the fingertip, palm, or forearm. Testing is done
outside the body (In Vitro diagnostic use). It is indicated for use at home (over the counter [OTC]) by a single
patient with diabetes and should not be shared, as an aid to monitor the effectiveness of diabetes control. The
system is not to be used on neonates, nor for the diagnosis of, or screening for diabetes mellitus. Alternative
site testing can be only used during steady-state blood glucose conditions.

3
Important Safety Instructions
Lancets and meters are for single use only. A new, sterile lancet should be used each time you perform a
test. The lancing device, lancets and meter are NOT to be shared between users or other family members.
Do NOT use on multiple individuals. Sharing a lancing device and lancets may transmit blood borne
pathogens, such as viral hepatitis.
All parts of the kit are considered biohazardous and may transmit infection, even if you have performed
cleaning and disinfection. Wash hands thoroughly with soap and water before and after handling the meter
or lancing device.
For further information, please see: "FDA Public Health Notification: Use of Fingerstick Devices on More
than One Person Poses Risk for Transmitting Bloodborne Pathogens: Initial Communication" (2010)
http://www.fda.gov/MedicalDevices/Safety/AlertsandNotices/ucm224025.
"CDC Clinical Reminder: Use of Fingerstick Devices on More than One Person Poses Risk for Transmitting
Blood borne Pathogens" (2010) http://www.cdc.gov/injectionsafety/Fingerstick-DevicesBGM.html

4
Standard Accessories
The EME Blood Glucose meter and accessories are working together to measure the amount of glucose in
your blood. The system includes:
Optional Accessories
• Level 3 Control Solution
Note:
1. EME Level 2 Control Solution is included with the system.
2. EME Level 3 Control Solution is available. For purchase, please call the Customer Care Service
toll-free at 866-994-3345 (Eastern Time, Mon-Fri 9:00AM~5:00PM).
• Blood Glucose Meter
• 10 Test Strips
• Carrying Case
• 2 Alkaline Batteries
• 10 Lancets
• Lancing Device
• AST Lancing Device Cap
• User’s Manual
• Quick Reference Guide
• Log Book
• Level 2 Control Solution
• Control Solution Instructions
• Test Strip Instructions

5
Why is it so important to test blood glucose regularly?
Testing your blood glucose regularly can make a big difference in how you manage your diabetes every day.
We have made this SMBG system as simple as possible to help you use it regularly. Your meter is easy to
use, and you can adjust the lancing device for your comfort.
Do you need help?
If you have questions or need assistance, please call the Customer Care Service toll-free at 866-994-3345
(Eastern Time, Mon-Fri 9:00AM~5:00PM). During non-service hours, please contact your healthcare provider.
Please complete your warranty card and mail it, so you receive the best customer service possible and news
about product update.
Note:
Although the EME SMBG System is easy to use, you may need to consult with your
healthcare professional (this may be your doctor, pharmacist or diabetes nurse educator)
for instructions on how to use the system. Only the correct use of the system will ensure
accurate results.

6
Important Information about Your New Meter
EME blood glucose meter is designed and approved for testing fresh capillary whole blood samples from
your fingertip palm, and forearm. The meter is for in vitro diagnostic use ONLY (for testing outside the
body). It should not be used to diagnose or screen for diabetes.
EME blood glucose meter can only be used with EME Blood Glucose Test Strips. Other test strips will
give inaccurate results.
Testing is not valid for neonatal blood specimens.
Do not disassemble the meter as this may cause damage to the components resulting in incorrect
readings. Disassembling the meter will also void the warranty.
Always keep the meter clean and store it in a safe place. Protect the meter from direct sunlight to ensure
a longer lifespan.
You should not store the meter and test strips in a car, bathroom, or refrigerator.
Keep the meter, test strips and lancing device away from children and pets.
You should not test critically ill patients with home-use blood glucose meters.
Incorrect results may occur when performing the test. If you believe you are not feeling well, please
contact your healthcare professional.
Remove batteries if the meter will not be used for one month or more.

7
Note:
Consult with your healthcare professional before testing on your palm and forearm.
Do not touch the strips with wet hands.
Do not use expired strips (the expiration date is shown on the bottle.)
Do not bend, cut or twist the strips.
Up to the altitude of 10,000 feet has effect on readings.

8
Health-Related Information
If you are experiencing dehydration, frequent urination, low blood pressure, shock or hyperosmolar
hyperglycemic nonketotic coma (HHNKC), you may get a test result that is lower than what your blood
glucose really is. If you think you are dehydrated, call your doctor right away.
If you have followed the steps in the user’s manual, but still have symptoms that don’t seem to match
your test results, contact your Healthcare Professional or physician immediately. If you have questions
regarding the use of the meter, please call the Customer Care Service toll-free at 866-994-3345 (Eastern
Time, Mon-Fri 9:00AM~5:00PM). During non-service hours, please contact your healthcare provider.
Please read your test strip instructions carefully for additional health-related information.

9
Table of Contents
Chapter 1: Understanding Your Meter ….......................................................................................................11
The EME Blood Glucose Meter …..............................................................................................................11
The EME Accessories …..........................................................................................................................13
Installing Batteries …..................................................................................................................................14
Setting The Time and Date - First Time Use .............................................................................................15
Using EME Blood Glucose Test Strips ......................................................................................................16
Chapter 2: Control Solution Testing..............................................................................................................17
Why Run a Control Solution Test ...............................................................................................................17
About The Control Solutions ......................................................................................................................18
Running a Control Solution Test ................................................................................................................19
Understanding Control Solution Test Results ............................................................................................22
Chapter 3: Testing Your Blood Glucose .......................................................................................................24
Using the Lancing Device .......................................................................................................................24
Inserting a Lancet into the Lancing Device ................................................................................................25
Running a Blood Glucose Test with Blood from Your Fingertip .................................................................27
Alternate Site Testing (AST)……...……………………………………………………………………………….30
Running a Blood Glucose Test with Blood from Your Palm or Forearm …….............................................32
Discarding Used Lancets …......................................................................................................................33
Expected Values………………….…...........................................................................................................34
Unusual Test Results…..............................................................................................................................34

10
Symptoms of High or Low Blood Glucose …..............................................................................................35
Comparing Your Meter Result to Lab Results …........................................................................................36
Chapter 4: Meter Memory, Setup …...............................................................................................................37
Memory, Storing Test Results …................................................................................................................37
Viewing Test Results …..............................................................................................................................38
Chapter 5: Maintenance and Troubleshooting ….........................................................................................39
Installing Batteries ….................................................................................................................................39
Cleaning and Disinfecting Your Meter and Lancing Device...……..............................................................40
Cleaning and Disinfection Frequency.........................................................................................................44
Maintenance and Testing ..........................................................................................................................45
Screen Messages and Troubleshooting ….................................................................................................46
Chapter 6: Technical Information …..............................................................................................................49
Specifications ….........................................................................................................................................49
Limitations…...............................................................................................................................................50
Device Information …................................................................................................................................52
Warranty ....................................................................................................................................................54

11
Chapter 1: Understanding Your Meter
The EME Blood Glucose Meter
Test Strip Slot-
Insert test strip
here. Strip Enjector-
Push the Strip
Ejector to
remove the strip.
Display-
Shows results,
messages, and
results stored in
memory.
Left ()
Buttons-
Press to enter
memory, adjust
setting, and
scroll through
results.
Battery Door-
Flip open the battery door by
pushing the tab in the direction of
the arrow and pulling the door up.
Right ()Buttons-Press to
turn the meter on, confirm
setting, and scroll through
results.

12
Folder Symbol Meaning
Date Show the moment of month and day.
Time Show the moment of time.
Test result Show the test result.
Record/Average display Tracking all the test results or average of
/14/30/90 days.
Control Solution Control Solution test and the result is not
included in the memory.
AM Indicate before noon
PM Indicate after noon
Batteries status When the battery symbol appears, prepare
new batteries for installation.
AC = ante cibos Indicate before meal
PC = post cibos Indicate after meal
Insert strip Insert the test strip to test blood glucose.
Thermometer When the thermometer icon appears, the
temperature is too high or too low.
Error The meter system is in fault.
Memory Show the memorized results
Apply blood Apply blood to the test strip
Glucose unit The testing unit of blood glucose is mg/dL.

13
The EME Accessories
Test Strip Bottle
Trigger button-
Press the trigger
button to activate
the lancing device
Carrie
r
-
Insert the lancet
into the carrier
Adjustable tip-
Select the
desired
penetration depth
Hub-
Unscrew or
Recap the Cap.
Sleeve-
Hand Hold
Area
A
ST
Lancing
Device Cap-
Use this
transparency
cap for AST
testing
Sliding barrel -
Pull on until it clicks
and then release to
enable lancing
device.
Strip Insert
Direction
Hand Hold
Area
Edge to Apply
Sample
Electrode
Confirmation
Window
Expiration
Date
Test Strip
Lancing Devicing

14
Installing Batteries
1. Open the battery door on the
back of the meter by pushing
the tab in the direction of the
arrow and pulling the door up.
3. Put the battery door back in
place and snap it closed.
The meter turns on
automatically.
2. Insert two batteries and the
meter beeps.

15
Setting The Time and Date - First Time Use
Setting the current time and date in your meter is important if you use the meter memory.
3. Repeat step 2 to set the date and
time. The flashing field is the one
you are currently setting. (A=AM,
P=PM)
1. Press (right button) to
turn the meter on.
2. The display shows the last
2-digit of the year that flashes at
the top of display as well. Press
(left button) to adjust the year
and press (right button) to
confirm the setting.

16
Using EME Blood Glucose Test Strips
Use only with EME Blood Glucose Meters.
Run a control solution test every time you open a new box of test strips (See Chapter 2 "Control Solution
Testing.")
Keep the test strips in their original bottle.
After you take a test strip out of the bottle, tightly close the bottle immediately. This keeps the test strips
dry.
Use the test strip within three minutes after taking it out of the bottle.
The strip is for single use only. Do not reuse it.
Record the date you open the test strip bottle. Be sure to check the expiration date on the test strip bottle.
The test strip is good for three months from the date the bottle is opened or until the expiration date on
the bottle, whichever comes first.
Store the test strip bottle and your meter in a cool dry place.
Store the test strips between 35.6°F - 86°F (2°C ~30°C). Do not freeze.
Do not apply blood or control solution to the test strip before you insert it into the meter.
Do not touch the test strip with wet hands. Do not bend, cut, or twist the test strips.
EME Self-Monitoring Blood Glucose Test System is a “no code”system and does not require any test
strip calibration.

17
Chapter 2: Control Solution Testing
Why Run a Control Solution Test
We recommend that you run the EME level 2 and level 3 control test because it lets you know that your meter
and test strips are working properly to give reliable results. You should run the control solution tests when:
You use the EME Blood Glucose Meter for the first time.
You open a new bottle of test strips.
You think the meter or test strips may be working incorrectly.
You drop the meter.
You have repeated a test and the test results are still lower or higher than expected.
You are practicing the test procedure.

18
About The Control Solutions
Use with EME test strips.
Write the date you opened the control solution bottle on the bottle label. The control solutions are good
for three months from the date the bottle is opened or until the expiration date on the bottle, whichever
comes first.
Do not use a control solution that is past the expiration date.
Control solutions can stain clothing. If you spill the solution, wash your clothes with soap and water.
Close the bottle tightly after every use.
Left over control solution should not be added back into the control bottle.
Store control solution at room temperature, between 35.6°F - 86°F (2°C~30°C). Do not freeze.
If you would like to purchase EME level 2 and level 3 Control Solutions, please contact your local dealer.

19
Running a Control Solution Test
You need the meter, a test strip, and control solution.
1. Put a test trip into the
meter as the direction
of the arrow on the test
strip. The meter turns
on automatically.
3. The icons and
show themselves.
2. Press (left button) to set (AC), (PC)
or CS Mode, then press (right button) to
confirm the setting.

20
4. Place the meter on a flat
surface, like a table.
5. Remove the control solution
bottle cap and wipe the tip
of the bottle with a tissue.
6. Squeeze the bottle until a
tiny drop forms at the tip of
the bottle.
7. Touch the drop at the tip of the
test strip.
8. The meter starts to count down
from 5 seconds and then
shows the test result.
9. Do not remove the test strip
yet. Check if the reading
falls within the range printed
on the test strip bottle.