Innov2Learn GLUCO Mini Instruction Manual

1
GLUCO Mini User’s Manual
www.innov2learn.ca 1/2
1- Test stripe guide
Slide the test strip in here.
2- Status display
Displays the current state of the
device.
3- ON / OFF button
Turns the device ON or OFF, and
displays the battery's current state.
- Hold it for 3 seconds to turn it ON
or OFF.
4- USB type C
The USB cable is inserted here
in order to recharge the device.
5- USB 3 Micro-B
The USB cable is inserted here
in order to recharge the device.

2
GLUCO Mini User’s Manual
www.innov2learn.ca 2/2
1- Turn on the device
Hold the On / Off button for about 3
seconds.
2- Connect to device
Open de SYHM app.
2.1 - Android/ iOS apps:
- Open the app, select the
language an then click OK.
- Click on Glucometer.
- Your device must be shown
under Available Devices.
- Click on the device name.
2.2 - Windows / Mac OS X apps:
- Connect the USB bluetooth
dongle to your pc
- Open the app and click on "Add
Device +"
- Your device must now appear on
the list.
- Click on the device name.
3- Insert the test strip
Slide the test strip into the test
strip guide.
4- Send the test results to the
device
The application is now showing a
notification indicating that the
device is ready to receive the
results.
Enter the desired value and click
on the "Send" button.
5- Check the test results
Test results appear on the LCD
display.
How it works
Recharging the Battery
When the battery is low, the ON/OFF button starts flashing with the following
pattern: two quick flashes followed by one long flash.
To recharge the device, plug the charge in one of the USB ports. Both USB ports
can be used to recharge the device. Wich one to use is up to you.
While the battery recharges, the ON/OFF button will flash constantly.
When the recharge is finished, the light on the ON /OFF button will remain ON,
indicating that the battery is 100%.