Emerson Bristol 9110-00A Operation manual

Product Data Document
118DS-16b
July 24, 2007 - Page 1
Website: www.EmersonProcess.com/Remote
Remote Automation Solutions
Bristol®Series 9110-00A
Remote Set Regulator
Features
Compact size
Integrally mounted
Discrete and analog inputs
Guard feature*
Analog feedback
Adjustable speed control
Incremental step change
Explosion – proof actuator case
*In the guard position, the drive mechanism will be
active only if the guard input signal is true.
General
The Bristol® 9110-RSR, from Emerson Process
Management, is a bi-directional microprocessor
based rotary actuator that sets the output of a
pneumatic regulator. The output can be adjusted
electrically by either discrete (raise/Lower) or analog
inputs. These input signals to the “RSR” can be
received from remote or local locations either by
manual switches or automatic devices.
Description
Series 9110-00A, Remote Set Regulators are trans-
ducer devices that use an electrical input signal to
set the level of a pneumatic output signal. Depend-
ing on the actual models, the output can be cong-
•
•
•
•
•
•
•
•
ured for a 1-5 Vdc or 4-20 mA dc signal. For the
Raise/Lower models, the input can be congured to
accept a continuous or pulse incremental dc signal.
The pneumatic output of a Remote Set Regulator may
be specied with a 3-15, 3-27 or 6-30 psi output. All
models can operate from pressure supplies up to 100
psi maximum.
The Remote Set Regulator is contained in a weath-
erproof, explosion-proof enclosure having a detach-
able threaded cover. Removal of the cover provides
access to the eld wiring terminals and the pro-
grammable option switches.
Regulators are factory-furnished for 12 or 24 Vdc
supply operation. These voltage ratings are xed
and cannot be changed in the eld.
In-line or pipe mounting are offered as for instal-
lations. The former uses a ¼ inch rigid pressure
line for support, while the latter includes a special
bracket for two-inch pipe mounting.

Product Data Document
118DS-16b
July 24, 2007 - Page 2
Bristol®Series 9110-00A
Remote Set Regulator
Remote Automation Solutions
Website: www.EmersonProcess.com/Remote
Performance Specications
Accuracy
Electrical input to pressure output: ±5% of span
Pressure output to feedback: ±5% of span
Feedback volts to pressure output: ±5% of span
Pulse input to pressure output: ±20% of span
Sensitivity
.04% of span (Min. input for readable output)
Repeatability
±0.5% of span
Environmental Effect
±1% max. full scale per 50ºF (28ºC) change
Supply Voltage Effects
±0.15% max. full scale per 1 volt change
Hysteresis Effect
(Output to Gage) ½% of span
Supply Pressure Effect
0.1 Max. PSI change in output for 10 PSI
change in supply pressure (within supply limits)
Gas/Air Consumption
0.007 SCFM at 40 psig supply pressure, at
steady state and increasing supply pressures.
•
•
•
•
•
•
•
•
•
Environmental Specications
Primary Location
Suitable for eld or housed-in unheated
buildings
Temperature Limits
-20 to 150º F (-29 to 66°C) operating
-40 to 185º F (-40 to 85°C) storage
Humidity Limits
10 to 95% RH, -20 to 130° F, (-29 to 55° C)
operating
10 to 50% RH, 130 to 150°F (55 to 66°C)
operating
Vibration Limits
0.1 g max., 10 – 500 Hz
Interference
R.F.I. rejection of the actuator depends on the
shielding of the input and output since the aluminum
housing (with cover in place) greatly attenuates RF
eld strength.
Effect with wiring enclosed in conduit SAMA STD
PMC 33.1, Class 1 and 2, 20 MHz to 500 MHz:
<0.5% FS error
Case Classication
Designed to NEMA type 4 hazardous
Safety
Designed to meet ANSI Standard C39.5
Explosion-proof for Class 1, Division 1, Groups B,
C and D; Dust-ignition-proof for Class II, Division 1,
Groups E, F and G; Suitable for Class III, Division 1;
Nonincendive for Class 1, Division 2, Groups A, B,
C and D.
•
•
•
•
•
•
•

Product Data Document
118DS-16b
July 24, 2007 - Page 3
Bristol®Series 9110-00A
Remote Set Regulator
Remote Automation Solutions
Website: www.EmersonProcess.com/Remote
Supply Specications
Electrical
Models Requiring 12 volts: 11 to 14 Vdc, 0.35 A
max.
Models Requiring 24 Volts: 22 to 28 Vdc, 0.25
A max.
Fusing: One 1 A, 250 V 3 AG normal blow chip
mounted on terminal board
Power Failure: In the event that the supply
voltage drops below rated value or goes to zero,
mechanical memory will retain the last given
setting.
Pneumatic Supply
Models with 3 – 15 PSI range: 20 PSI min., 100
PSI max.
Models with 3 – 27 PSI range: 30 PSI min., 100
PSI max.
Models with 6 – 30 PSI range: 35 PSI min., 100
PSI max.
•
•
•
•
•
•
•
Physical Specications
General
Actuator Case:
Weatherproof, explosion proof
Cast aluminum housing with
gasketed screw-on cover
Light gray epoxy nish
Overall Dimensions
Actuator Case:
6” (152.4 mm) dia. By 7-1/8” (181 mm) long
Model 9110 complete:
10” (254 mm) long by 6” (152.4 mm) dia.
Mounting
Model 9110 complete: Line or 2” dia. Pipe
mount
Weight
Approx. 12 lbs.
•
•
•
•

Product Data Document
118DS-16b
July 24, 2007 - Page 4
Bristol®Series 9110-00A
Remote Set Regulator
Remote Automation Solutions
Website: www.EmersonProcess.com/Remote
Remote Set Pneumatic Regulator 9110-rsr
Series 9110-00a
A B C - D E F
Model Number: 9110-00A - __ __ __ - __ __ 0
9110-00A
SELECT DESCRIPTION CODE
AELECTRICAL INPUT X9110BASE
10 Discrete 1
Analog 2
BPOWER
20 12 Vdc 1
24 Vdc 2
CPNEUMATIC OUTPUT
30 3-15 PSI 1
3-27 PSI 2
6-30 PSI 3
DMOUNTING X9110MOUNT
40 Pipe 1
Line 2
EAPPROVAL
50 None 1
FM-EXP . proof CL I, Div. 1, Groups B, C & D 2
Dust-ignition proof CL II, Div. 1, Groups E, F & G
Suitable for CL III, Div. 1
Non-incentive CL I, Div. 2, Groups A, B, C & D
NEMA 4

Product Data Document
118DS-16b
July 24, 2007 - Page 5
Emerson Process Management
Remote Automation Solutions
Watertown, CT 06795 USA T 1 [phone]
Mississauga, ON 06795 Canada T 1 [phone]
Worcester WR3 8YB UK T 44 (1) 905-856950
Website: www.EmersonProcess.com/Remote
© 2007 Remote Automation Solutions, division of Emerson Process Management. All rights reserved.
Bristol, Inc., Bristol Babcock Ltd, Bristol Canada, BBI SA de CV and the Flow Computer Division , are wholly owned subsidiaries of Emerson Electric Co. doing business as Remote Auto-
mation Solutions (“RAS”), a division of Emerson Process Management. FloBoss, ROCLINK, Bristol, Bristol Babcock, ControlWave, TeleFlow and Helicoid are trademarks of RAS. AMS,
PlantWeb and the PlantWeb logo are marks of Emerson Electric Co. The Emerson logo is a trademark and service mark of the Emerson Electric Co. All other marks are property of their
respective owners.
The contents of this publication are presented for informational purposes only. While every effort has been made to ensure informational accuracy, they are not to be construed as war-
ranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. RAS reserves the right to modify or improve the designs or
specications of such products at any time without notice. All sales are governed by RAS’ terms and conditions which are available upon request. RAS does not assume responsibility for
the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any RAS product remains solely with the purchaser and end-user.
Bristol®Series 9110-00A
Remote Set Regulator