Emerson Inspire 1HDEZ-1521 User manual

PROGRAMMING SET -UP USAGE GUIDE QUICK START OVERVIEWDIAGNOSTICS
Programmable/Non-Programmable Thermostat
Homeowner User Guide
Emerson Inspire™
Model: 1HDEZ-1521

2
Model: 1HDEZ-1521
WHITE-RODGERS HOMEOWNER HELPLINE:
1-800-284-2925
Emerson Inspire™Features:
• Programmingforanyschedule(includingnon-programmable)
• Remindersforseasonalmaintenanceandchanginglters
• Energysavingfeaturesthatimprovecomfort
• Interchangeablefaceplatestomatchanyhome(silverorwhite)

3
ThermostatOverview ..................................................................................... 4
QuickStartGuide ........................................................................................... 5
Navigating Through Your Thermostat Menus.............................................. 5
Set the Current Time and Day .................................................................... 5
Choose the System Setting........................................................................ 6
Energy Saving Factory Pre-Program.......................................................... 6
UsingYourThermostat................................................................................... 7
System Setting ........................................................................................... 7
Auxiliary Heating ........................................................................................ 7
Temporary Temperature Hold ..................................................................... 8
Non-Programmable Mode .......................................................................... 8
Choosing the Fan Setting ........................................................................... 9
Maintenance Reminders ............................................................................ 9
SettingUpYourThermostatOptions ............................................................ 10
Clock and Display Settings menu............................................................... 10
Heating Program/Cooling Program ............................................................ 12
Thermostat Setting Menu........................................................................... 13
Air Filter Maintenance/Service Reminder/Humidifier
Maintenance............................................................................................... 13
ProgrammingYourThermostat...................................................................... 16
Planning Your Program ............................................................................... 16
Enter the Heating & Cooling Programs ...................................................... 16
Diagnostics ..................................................................................................... 18
Alert Information Detail............................................................................... 18
Reset Operation ......................................................................................... 19
Record of Thermostat Options Selected .................................................... 20
Service Information .................................................................................... 20
TableofContents

OVERVIEW
4
THERMOSTATHOMESCREENDISPLAYANDCONTROLS
1The indoor temperature
2The relative indoor humidity
3The desired temperature or setpoint
4Selects the System setting (see page 7 for more information)
5Use and , and to change temperature and navigate through menus.
6is used to enter any menu function of the thermostat
7Selects the fan operation (see page 9 for more information)
1
7
5
2
4
6
3

QUICK START
5
Press to enter the Main Menu
Highlight a menu item using the
or buttons
Enter the item by pressing
Use the or and the or to
change menu items and settings
Press the Home
button to display the
Home Screen.
QUICKSTARTGUIDE
Press the Enter button to save any
changes you have
made and display
the previous menu.
Ifnobuttonispressedfortwo
minutes,youwillreturntothe
homescreenwithoutsaving
changes.
Your thermostat features a simplified easy to understand menu structure.
Navigating through any menu in your thermostat uses the same approach.
Navigatingthroughyourthermostatmenus
Press to enter the Main Menu
SettheCurrentTimeandDate
On the Main Menu, highlight and
enter ClockandDisplaySettings.
Highlight and Enter Time and Date.
Set the time and date using the
or buttons.
Press to highlight Minute, AM/
PM, Month, Day or Year.

QUICK START
6
The thermostat will automatically
assign the correct day of the week
after the date is set.
Press the Enter button when
finished.
ChoosetheSystemSetting
From the Home screen, press the
button as shown to choose the
system setting.
If you want to change the heating and/or cooling programs in your thermostat,
see the “ProgrammingYourThermostat” section.
FactoryPre-ProgrammedHeatingandCoolingSchedule
Wake Up
(Morning)
Leave for Work
(Day)
Return Home
(Evening)
Go to Bed
(Night)
Heating Program 6:00 AM 70oF 8:00 AM 62oF 5:00 PM 70oF 10:00 PM 62oF
Cooling Program 6:00 AM 75oF 8:00 AM 83oF 5:00 PM 75oF 10:00 PM 78oF
EnergySavingFactoryPre-Program
Your thermostat is programmed from the factory with the energy saving settings
shown below for every day of the week. If this program meets your needs, simply
select either Cool,Heat or Auto using the System button and press to begin
program operation.
NOTE: If system power is lost for more than eight hours, the clock will have to be
reset. Programming and configuration settings will be saved.

USAGE GUIDE
7
SystemSetting
Press the System button to choose whether you want your system to be in Cool,
Heat, EM or Auto mode.
Thermostat controls only the
cooling system.
Thermostat controls only the
heating system.
Heating and Cooling systems
are off.
Emergency setting available
only when the thermostat is
configured for a heat pump
in the system. When
selected, system will use
only the backup heat.
Auto Changeover is used
where both heating and
cooling may be required
during the same day.
AUTO allows the thermostat
to automatically select
heating or cooling depending
on the indoor temperature
and the selected heat and
cool temperatures. This
thermostat will not allow you
to program a conflict
between Heating and
Cooling setpoints.
For example: In the morning heating is
required. During the day, the tempera-
ture gets warmer and you want the
air conditioner to run. The thermostat
will automatically change the system
mode from heating to cooling.
The temperature you desire in your
home can be changed by pressing
or .
AuxiliaryHeating(Heatpumpsonly)
If you have a heat pump, your system
will automatically activate Auxiliary
Heating when the outside temperature
is too cold for the heat pump to effi-
ciently heat your home. When Auxiliary
Heating is called for, the display will
show “Aux” with the Heat icon.
USINGYOURTHERMOSTAT

USAGE GUIDE
8
TemporaryTemperatureHold
You can temporarily adjust the tempera-
ture in your home at any time while
your thermostat is running a program
by pressing either the or . Your
thermostat will maintain this desired
temperature for four hours (default).
The display will show “Holdat” by
the desired temperature, and “Hold
Until”with the time the temporary hold
will end. The display will also briefly
show “Press or tosettheHold
Time”. While this message is dis-
played, you can change the time that
you wish to have the Hold end.
Press the button to cancel a tempo-
rary hold. The desired temperature will
display the current program setting.
Permanent Temperature Hold
If you desire, you can set your
thermostat to permanently hold a
temperature. This feature will bypass
any programs you may have set
in your thermostat and maintain a
constant temperature.
To enter permanent hold, change the
temperature with the or and
press the Hold button. When your
thermostat is in this mode, the “Hold
at” will be displayed by the desired
temperature.
Press the button to exit and resume
programmable mode.

USAGE GUIDE
9
Your thermostat can automatically
provide reminders for replacing the air
filter and humidifier pad, as well as a
reminder for when to perform regular
maintenance. Each of these reminders
are turned on or off and the reminder
time period set from the appropriate
item in the ThermostatSettings
Menu.
Maintenance reminders are:
When a reminder appears, it can
be turned off by entering the Alert
Information Detail menu on the Main
Menu.
Select Yes to “ClearAlertandReset
Timer”.
ChoosingtheFanSetting(OnorAuto)
Fan Auto This is the most
commonly used setting. The fan will
turn on only when the heating or
cooling system is running.
Fan On You can choose to have
the fan running continuously by
selecting Fan On.
MaintenanceReminders

SET -UP
10
ClockandDisplaySettingsMenu
In addition to setting time and day on this menu, you can use the Display
Settingsmenu to adjust the screen brightness, choose the background color,
select the keypad backlight, and the auto dimmer. Other choices select what will
be displayed on the Home screen, Time & Day, Outdoor Temp Display, Humidity
Display and Alert Message Area.
On the Main Menu, highlight and
Enter ClockandDisplaySettings
Highlight and Enter DisplaySettings
Brightness– Use the and
buttons to adjust between dark and
bright.
SETTINGYOURTHERMOSTATOPTIONS