Emmezeta FY-2209 User manual

FY-2209
4
G
1
2
4
5
6
7
8
25/06/2016
6444
120598 120598 BLACK/WHITEBLACK/WHITE
3
1
H
42
40
EF

5
6
7
8
4
1
H
$$
+
&&&
6
2
40
%
2
3
$$
&&&
%

1
H
'
'
H
(
(
2
3
4
4
H
*
)
*
)
4
G
4
1
H
1
4
E
F
'
'
(
(
*
)
*
)

6

FRANCAIS
HRVATSK
ENGLISH
ASSEMBLY ADVICE :
CLEANING ADVICE:
1 > CAREFULLY REMOVE THE DUST.
2 > USE A SOFT, CLEAN DAMP CLOTH WITH SOAPY WATER.
1 > CAREFULLY READ THE ASSEMBLY INSTRUCTION.
2 > IDENTIFY THE COMPONENTS OF THE FURNITURE.
3 > GROUP AND CHECK THE HARDWARE.
4 > USE THE REQUIRED TOOLS.
5 > CREATE AN ASSEMBLY ZONE.
6 > MAKE THE ASSEMBLY.
NEVER FORCE THE CONNECTIONS.
RE-TIGHTEN THE SCREWS AFTER FEW DAYS.
PLEASE RETAIN THE AI LEAFLET FOR FUTURE REFERENCE,
THE AI CONTAINS INFORMATION WHEN CLAIMING
FOR MISSING PARTS.
NEVER USE ABRASIVE PRODUCTS
OR SOLVENTS.
DO NOT APPLY EXCESSIVE PRESSURE
WHEN USING THE DAMP CLOTH.
WATER WITH DETERGENT
SPECIFIC SUPPLIER CLEANING
SOAPY WATER (NEUTRAL SOAP)
PAPER DECOR LAMINATED
SURFACES
LACQUERED
SURFACE
VARNISHED
WOOD
LEATHER
TEXTILE

Dear Customer,
Congratulations on your purchase of this EMMEZETA product.
Please take a few minutes before starting operation of the swivel chair and read the following operating instructions.
ATTENTION!
This chair is suitable for private use.
The gas lift may only be serviced or replaced by qualified personnel. Casters: The standard casters are suitable for textile flooring.
For laminate, cork, parquet and stone flooring, we recommend the use of type W casters and a floor protection mat. You can
purchase these wheels in your best DIY store
We do not accept liability for any damages resulting from non-compliance. Maintenance: Check and tighten all screwed and
plugged connections in regular intervals. Attention! Tighten all screws only one or two revolutions. After fastening all screws and
adjusting the position of the pads and armrests, fully tighten all screws.
Only one person should sit on the chair.
The chair must not be used, unless all screws are fully tightened. Check this every 3 months.
If individual components of the chair are damaged or worn out, do not use the chair any more until these have been replaced.
Only trained staff may carry out change and work in the area of seat adjustment elements.
Care:
Wipe off dirt using a moist piece of cloth and dry it up using dry cloth. Use a leather-care medium occasionally.
Vacuum-clean leather upholstery regularly.
Vacuum-clean the bolster with the correct nozzle and with feeling. Remove heavy dirt with dry foam.
Wipe the frame using a lint-free duster or a soft moist mop. If the dirt is heavy, use diluted household cleaner. Scouring agents are
not suitable. Polish chromium and aluminum parts using chromium cleaning agent.