PotteryBarn Carved Wood Triptych User manual

The hardware included with this item is meant for drywallor
stud mounting only. If yourwalls are made from concrete,
brick or plaster, please consult your local hardware store for
assistance in selecting the appropriate hardware.
Carved Wood Triptych
Mounting Instructions
Hardware(Included):
6pcs 6pcs
Do not use cable to hang these panels!
Hanging Orientation:
Mounting Instruction:
This item consists of 3 wood panels. Each panel has 2 D-rings located on the back for wall
hanging. Measure the distance of each panel between the center of the two D-rings
TOOLS NEEDED (not included):
a

With the back of each panel facing away from the wall, hold itagainst the wall at
a desired mounting location. Mark two reference points(A, B) on the wall as
shown.
Connect the two points (A,B) with a light pencil line. Use a level to ensure that the line is level.
\
Make two insertion marks(C, D) centered along the line using the measurement “a”.
Use a stud-finder to determine if there is a wall stud[s] located at [each] either insertion mark.
Install the proper hardware, as shown below. Note that the head of each screw resides about
3/8” from the wall.
Dry Wall Mounting
Stud Mounting

With the help of another person, hang each panel to the wall so that the D-ring engage the
screw heads.
Care Instructions:
Dust often with a soft, dry cloth
Avoid using strong chemical or abrasive cleaners.
Thank you for your purchase
Stores/catalog/www/potterybarn.com