Empire BeBa 25825 Assembly instructions

Tools required for installations
Note: For safety reasons Unit must be secured to the wall using
suitable fixings (pre-drilled holes provide in back panel of unit)
When fitting a basin to a unit, a bead of silicone should be applied
to the top edge of the basin unit to seal between the basin and unit.
BATHROOM FURNITURE FITTING GUIDE

Hinge Adjustment
Loosen screw‘A’on all
hinges. Adjust door and
retighten screw.
A-Vertical B-Lateral
Loosen screw‘B’.Adjust
door and retighten screw.
C-Horizontal
Loosen screw ‘B’ ½ turn.
Turn screw‘C’until door is
positioned correctly and
retighten screw‘B’.
BA
Drawers Remove/Install
pull out/lock
C
To Remove the metal drawer: press the button as follow Step A, then pull out in level position ;
To Install the metal drawer: press the button as follow Step A, then push in in level position
Drawer position: if drawer position needs altering follow Step B or C according to the drawer positon on unit.

Wall hung unit installation. ( fixings in box)
Please measure the L distance between each brackets on unit. and H ( height as customers
request. The standard height is 850mm (including basin height) from floor to wash basin
Mirror cabinet and Storage unit. ( plug screws with chrome covers in box)
Please measure the L&H distance between each pre-drilled holes on products.and fixing them as
below steps.the distance will be 300-400 the mirror cabinet to basin as below . the distance from
floor to bottom of storage as customer requests.
LL
request hight
1
2
123
456
24h
!
handle in middle position
2
1
request hight
H
2 3
4
H
1
5 6
LL