EMS GSS-LABEL-PTR-M User manual

Printer Overview
Keys and LEDs Indication
Keys Function
− Press and hold for 2-3 seconds to turn on the printer.
− Press and hold for 2-3 seconds to turn off the printer.
− Ready status: Feed one label
− Printing status: Pause the print job
LEDs Status Indication
Green (solid) Full charged
2/3 charged level
Green (solid) 1/3 charged level
Green (blinking)
Low battery
Amber (solid) Battery is charging
Blue (solid)
Bluetooth device is ready
Blue (blinking) Bluetooth device is communicating
Blue (solid)
WiFi device is ready
Blue (blinking)
WiFi device is communicating
Note: WiFi device is optional.
Off
Printer is ready
Green (blinking) − Printer is paused
− Printer is downloading data
Red (solid)
−
Media cover is open
− Out of memory
Red (blinking)
−
No paper
− Paper jam
Install Belt Clip and Battery
Page 1 of 2
Feed button
Power on/off button
Printer status
LED indicator
Power LED
indicator
Battery status LED
indicator
Media holder
lock switch
Media cover
Media holder
Label roll guard
Print head
Print head
Media cover
release button
Platen
Platen
Li-ion battery
Battery open clasp
Belt chip
USB interface
USB interface
Power jack
MicroSD
card socket
Quick Installation Guide
972.535.5555 | www.emsbarcode.com
Page 1 of 2

Loading the Media
Charge the Battery
Loading Media in Peel-off Mode
* For more information and features about this printer, please refer to the user’s
manual on the CD disk.
* Specifications, accessories, parts and programs are subject to change
without notice.
Page 2 of 2
P/N：39-0520001-00LF
Liner
Labe
l roll
guar
d
972.535.5555 | www.emsbarcode.com
Page 2 of 2