emsys CellSPY Lite User manual
01
01
01
01
01
01
0101
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
0101
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
48V
01 02 03 04
09 10 11
12 13 14
15 16 17
18 19 20
06 07 08
05
21 22 23 24
29 30 31
32 33 34
35 36 37
38 39 40
26 27 2825
40 OR 60 CELLSPY LITES
1 CAT PHONE
1WIRELESSCURRENTTRANSDUCER
INSTALLATION GUIDE
CellSPY Lite
A BATTERY COMMISSIONING TOOL
1 2
3 4
5 6
01
8-60V
48V
To install CellSPY Lite, place the black clamp
over the negative post and the red over the
positive.
Clamp the WCT over the intercell cable with
arrow pointing in direction of charge current,
or towards the most negative cell in the string.
Open the application on the provided mobile
device- at the bottom of the home page, make
sure all cells are responding.
To power the WCT, power it over 8-60V.
Check the voltage across the batteries with a
voltmeter to double check.
Install the remaining CellSPY Lite sensors in
order. If you are using multiple boxes, start
with sensor 1 from box 2 after installing all
sensors from box 1.
Ensure that the thermistor, is as close to the
post as possible.
