emtake MT30 User manual

Manual –PC Program 03
Select color mode
1
2Type Alarm temperature and press Enter.
Alarm signal will change to Red with sound if it finds higher
temperature than alarm temperature.
3Click Save Image to save image manually or auto.
“Fever Window” : Separate display of temperature values.
1Temperature Calibration
- Click ①[Calibration] button towards a person
Without a fever on the photo zone
※ Please do calibration frequently since reference temperature of thermal
camera can be changed by ambient condition.
[Split] Divide the screen and sense the temperature in each area.
or [AI] Face Recognition mode
※ Click the thermal video screen to switch to the big screen
and small screen.
1
[Full Screen]
- x 1.5 times : Click ②[icon (□)] and click again to return to the original size.
- Full screen : click the right mouse button on the video screen
Detecting Fever
Affordable Thermal Camera
User’s Manual
Essentially check this manual out before install and using a camera
The measured temperature value may vary depending
on the measurement environment such as distance,
humidity, emissivity, ambient temperature, wind effect, etc.
*PC Software and Camera Hardware
can be changed without notice.
This device complies with part15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation
3

00
Specification
ㆍThermal camera ㆍUSB cable ㆍWall Mount Bracket ㆍPowered USB Cable
Resolution
Viewing of angle
Measuring range
Relative temperature sensing power
Connection
Power
Language
Size / Weight
Operation environment
80 X 60, Micro Bolometer Array
30。Lens / 50。Lens / 90。Lens
0.1℃(@ 30℃)
USB Data
USB DC 5V
English, Chinese, Japanese, Spanish etc.
55.5x55.5x53.7mm/100g
0~50℃
-20℃~ 100 ℃
Installation 01
1 l Install the camera for monitoring position.
2 l Connect camera and PC with USB cable.
3 l Execute PC program Emtake PC Viewer vx.x.exe.
4 l You can see thermal graphic image with temperature.
5 l It takes 2~5 min for stability.
PC Driver Installation 02
1. Download MT30 Driver.zip from www.emtake.com.
2. Unzip MT30 Driver.zip
3. Exute VCP_V1.4.0_Setup.exe.
* If Emtake PC Viewer can not find the com port, install manually in below.
(C:)
Program Files(x86)
STMicroelectronics
Software
Win7
Win8
2
Choose win7 >> windows 7 and windows 10
Choose win8 >> windows 8
Virtual comport driver
dpinst_amd64.exe
dpinst_x86.exe
stmcdc.cat
stmcdc.inf
3
Click for
32 bit OS
Click for
64 bit OS
Manual –PC Program 03
1. Download MT30 PC Viewer.zip from www.emtake.com
2. Unzip PC Viewer.zip.
3. Execute Emtake PC Viewer vx.x.exe
(Enter EMTAKE_MT30 when requesting a password)
Connect USB Camera and PC with USB cable
USB Port Appear. Select the COM# Port
1
2Click CONNECT button
CONNECT -> DISCONNECT and Image appears
1
2Select Display Mode (Left/right/up/down reverse & Split(or AI) )
Select Measurement Mode
1
- Human Mode displays between 25 °C~42 °C.
- Dynamic Mode displays between Max Temp ~ Min Temp.
- In USER Mode, user can set Max temp and Min temp.