Enabling Devices 1542 User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-TEC-TOYS or -800-832-8697
[e-mail]
iPad Mini Tabletop System - #1542 &
iPad Mini Tabletop ase (only)- #1542X
USER’S GUIDE
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Access made easy!
Our state-of-the-art iPad Mini Systems are available in two versions:
Tabletop and Mounting. The Tabletop version comes with a mounting
platform and a removable tabletop base. The Mounting version comes with a
mounting platform, a light duty mounting arm, and a clamp. The mounting
platform is designed for easy access to all of the iPad Mini’s electronic ports.
Two flexible cords (6½" apart) hold the iPad Mini securely. Removable
tabletop base is also available separately. See the iPad Mounting System for
details about the mounting arm and clamp. Platform size: 6¼"W x 8¾"L x
3½"H; Arm size: expands from 4½"L to 24"L.Weight: 3 lbs.
. The table top base is held in place with a thumb screw. To install or
remove the base, tighten or loosen the thumb screw (See Fig.1). Please
Note: If you would like to rotate your iPad Mini from say a horizontal to
vertical position just loosen the thumb screw to make your adjustment.
To lock the position, tighten the thumb screw.
Fig.1
2. Now you can place your iPad Mini into the platform. Slip one side of
your iPad Mini under the bungee cord holder, making sure you have all
your ports lined up with the holder. Adjust and secure with the second
bungee cord holder (See Fig. 2). This mount will hold an iPad Mini with
or without a case. (We recommend our case Item No. 580). The front
two feet of the tabletop base are designed to be clamped if needed
Fig. 2
Video: For more detailed setup information please view our setup video
at: www.enablingdevices.com and type in the Item no. 1542 in our search
box and then click on the results to take you to the video.
Caution:
Do not over tighten the thumb screw, or try to move or adjust the
mounting system after you have tightened the thumb screw. Doing so
can damage the iPad Mini Tabletop System and void your warranty.
Care of Unit:
The Mini Tabletop System can be wiped clean with any mild household
multi-purpose cleaner and disinfectant. Do not use abrasive cleaners, as
they will scratch the surface of the unit.
Rev 7/15/13
Tighten
Set
Knob