ENACFIRE SoundTank User manual

ENACFIRE Soundtank
Ultra-Performance Bluetooth Speaker
Quick Start Guide

Contents
English
Deutsch
Espariol
01
28

Packaging List
Type-C Charging Cable
ac_Ip—— T
3.5mm Audio Cable

Control
D Play/Pause
Press to Play/Pause Music
* Bluetooth Button
== Volume Down / Previous Song
Press once to decrease volume
Press 2 seconds switch to previous song
+ Volume Up / Next Song
Press to increase volume
Press 2 seconds switch to next song,
Power Button
§ Bass + Mode
Press once to activate
[orange light on]
Note:
Bass effect can be enhanced when the Bass + mode activate [Bass effect can also be largely influenced by
the audio quality]. Above control functions can be varied based on different media players.

Light Indicators and Jacks
Built-in Mic
TWS Stereo Mode Light Type-C
Charging Connector
AUX IN Jack
Bluetooth Light
Charging Light
Bass + Mode Light
Rubber Flap
Note: The rubber flap needs to be
closed to avoid dust and liquid

Light Status when Charging
Charging: Charging Light Flashing
Fully Charged: Solid Red
Charging Time: 6 hours to fully charged
Adapter Suggested: 5V~1.0A
Note:
When the battery is below 20%, low power mode will be activated with charging light flash rapidly.
Volume will also be decreased in order to preserve the remaining battery.

Power On and Off
Power On
Press and hold the power button for 1 second
. with Bluetooth light on
Bluetooth Light
Bluetooth Light Flashing: Pairing
Solid Blue Light: Connected
Power Button
Power Off
Press and hold the power button for 2 seconds
with Biuetooth light off
Note: Under TWS Stereo Mode, when one speaker is turned off, both speakers will turn off automatically.

Pairing
1. Turn on ENACFIRE Soundtank
2. Select ENACFIRE Soundtank’ from Bluetooth st
Note:
Please make sure ENACFIRE Soundtank is fully charged and
within the effective connection range before connecting
Cettns_setootn
ENACHRE Soundtank

Connect by AUX Audio Cable
When connecting the Soundtank by the AUX
Cable, below functions will be disabled:
1. The Bluetooth function will be disabled
2. The track backward and forward function will be disabled
3. The play/pause function will be replaced by unmute/mute function
Note: The volume control and Bass + Mode is still available

Water Resistant
CR3
VI i
Light Water Spray or Splash
Note: The rubber flap needs to be closed at all time to avoid any contamination and be water resistant
The waterproof effect may be reduced if the speaker is damaged or broken as result of daily use

Incoming Call
Bluetooth Button
The Soundtank features function for receiving call
through smart phones over Bluetooth
Answer Call / End Call
Press $ Bluetooth Button Once
Reject Call
Press and Hold $ Bluetooth Button for 2 seconds
Note:
Please keep the Mic as close as possible to achieve
better call quality

Q&A
Question 1: Unable to turn on the ENACFIRE Soundtank?
Answer: Please make sure the ENACFIRE Soundtank is fully charged by using the suggested 5V 1.0A
adapter. You can also try to use another USB cable to charge the Soundtank just in case the previous
cable is defective.
Question 2: Unable to pair or connect to devices?
Answer: Please follow the below steps to reset the ENACFIRE Soundtank
1. Turn on ‘ENACFIRE Soundtank’
2. Connect 'ENACFIRE Soundtank' to a phone by AUX cable and plug out the AUX cable
3. Double press the Bluetooth button within 10 seconds
4.Turn off ENACFIRE Soundtank’
5. Delete ‘ENACFIRE Soundtank’ from Bluetooth list
6. Reconnect the 'ENACFIRE Soundtank’
“10-

Q&A
Question 3: No audio when playing the music
Answer: Please make sure the ENACFIRE Soundtank is connected to the correct device, it will automatically
connect to the last connected device once it's turn on. Please also try to use different Apps to play the audio as
there might be a glitch happened to the App.
Question 4: There is no response when connect the ENACFIRE Soundtank to device by using the 3.5 AUX cable
Answer: Please make sure the 3.5mm audio s fully inserted to the AUX input, you can also try to use another AUX
cable just in case the one you used was defective.
S1-

How to contact ENACFIRE Customer Service Team.
If you have any issues, please always feel free to contact us through below methods:
US/CA: [email protected]
UK: [email protected]
@ SCAN QR CODE FOR
Quick Guide
=
More Product Information 5:
=
Extended Warranty to 2 Years
htp://www.enacfire.com
enacfire.com Warranty Extension

FCC WARNING STATEMENT
o e £GP, Cpaa
[ —"e
IC WARNING STATEMENT