Enblink SS311-EU-W User manual

Z-Wave Smart Stick Instructions
Enblink Co., Ltd. 2015 1
Z-Wave Smart Stick - Instruction
SS311-EU-W
Introduction
Getting Started
Thank you for purchasing this Enblink
product.
This product plugs into your Google TV™
unit and allows you to control and monitor
real world devices such as light switches,
dimmers, security sensors, and thermostats.
This product plugs into your computer and
allows you to control and monitor real world
devices such as light switches, dimmers,
security sensors, and thermostats.
This product works with the Enblink application for your
smartphone or tablet. This free application will allow you to
control and monitor devices connected to your network.
Installation
Do not plug in the device into the USB port before called for by
instructions.
Perform the following Steps to install the device:
1. Download the needed software driver from
http://www.enblink.com/download/SS311.zip
2. Follow the instructions provided on the computer during
installation of the driver.
3. Plug the Z-Wave USB Stick into the USB port of the
computer.
4. The Z-Wave USB Stick is now ready to be used with a
software application.
Technical Info & Set-Up Recommendations
Z-Wave™ is a two-way RF mesh networking technology. What
this means for you, the user, is that your network becomes
stronger each time you add a new device.
Each device in a Z-Wave™ network is designed to act as a
repeater. Repeaters can re-transmit the RF signal to ensure
that the signal is received at its intended destination (i.e., by
one of your devices) by routing the signal around obstacles.
Best Practices
1. For best results, do not move or relocate devices after they
have been included into the network. Z-Wave™ devices
should be plugged-in or hardwired at the location where they
will be used. If you wish to move a device, first delete it from
the network, then include it back into the network after you
have moved it.
2. To include a device, be sure that it is not already included in
a network. If the device is already included in a network, you
must first reset the device by following the instructions for
exclusion.
Unless specified otherwise, Enblink warrants that Enblink
Products will be free from defects in materials and workmanship
affecting normal use for a period of one year from invoice date
(“Standard Warranty”). This warranty is extended to the original
purchaser only and is not transferable.
This Standard Warranty does not cover damage, fault, failure or
malfunction due to external causes, including accident, abuse,
misuse, problems with electrical power, servicing not authorized
by Enblink, usage and/or storage and/or installation not in
accordance with Product instructions, normal wear and tear,
acts of God, fire, flood, war, act of violence or any similar
occurrence. Any attempt by any person other than Enblink
personnel or any person authorized by Enblink, to adjust or
repair the Products shall void the warranty.
During the one-year period beginning on the invoice date,
Enblink will repair or replace Products returned to Enblink’s
facility. Customer must prepay shipping and transportation
charges, and insure the shipment or accept the risk of loss or
damage during such shipment and transportation. Enblink will
ship the repaired or replacement products to Customer freight
prepaid.
Specifications
Warranty
Z-Wave & RF Specifications
RF
Z-Wave Chip ZM5101
Serial API
Central Controller
9.6kbps / 40kbps / 100kbps
Typical 40 meters
Release 6.51.03
9.6kbps: 868.42 MHz
40kbps: 868.40 MHz
100kbps: 869.85 MHz
9.6kbps: 908.42 MHz
40kbps: 908.40 MHz
100kbps: 916.00 MHz
Z-Wave Library
Device Type
Z-Wave Protocol
Data Rate
Frequency
Range
EU US

Z-Wave Smart Stick Instructions
Enblink Co., Ltd. 2015
Enblink does not give any warranty that the Products are fit for
any particular purpose and this Standard Warranty is given in
place of all warranties, conditions, terms, undertakings and
obligations implied by statute, common law, trade usage,
course of dealing or otherwise including warranties or conditions
of merchantability, fitness for purpose, satisfactory quality and/or
compliance with description, all of which are hereby excluded to
the fullest extent permitted by law.
If any provision of these Terms and Conditions is held by any
competent authority to be invalid or unenforceable in whole or in
part, the validity of the other provisions of these Terms and
Conditions and the remainder of the provisions in question shall
not be affected thereby. Where implied conditions and warran-
ties cannot be excluded due to local trade practices legislation,
Enblink’s liability for breach of such conditions and warranties
shall be limited, at Enblink’s option, to
(a) in the case of products, the replacement of the products or
the supply of equivalent products; the repair of such products;
the payment of the cost of replacing the products or of acquiring
equivalent products; or the payment of the cost of having the
products repaired OR (b) in the case of services, the supplying
of services again; or the payment of the cost of having the
services supplied again. Enblink’s total liability in respect of each
event or series of connected events shall not exceed the total
price paid for the purchase of product/s.
Enblink shall not be liable for Products not being available for
use, or for data or software which is lost, corrupted, deleted or
altered. Enblink shall not be liable to the Customer for any
incidental, indirect, special or consequential damages arising
out of or in connection with the purchase, use or performance of
products or services, even if Enblink has been advised of their
possibility.
Copyright & Disclaimer
© 2015 Copyright Enblink Co., Ltd.
All rights reserved.
Enblink are registered trademarks of Enblink Co., Ltd. All other
trademarks are the property of their respective owners.
Disclaimer: Enblink reserves the right to change specifications or
designs described in this manual without notice and without
obligation. Any typographical, clerical or other error or omission
in this document or other documents or information issued by
Enblink shall be subject to correction without any liability on the
part of Enblink without notice.
www.enblink.com
DO NOT DISPOSE IN DOMESTIC HOUSEHOLD WASTE.
To return unwanted products, contact the manufacturers
website shown on the product or your local sales office or
distributor.
2