Encore ENMUV-2 User manual

ENMUV-2
External USB Video Adapter (DVI/VGA)
The ENMUV-2 enables you to connect one more monitor, LCD or projector to a computer
with a USB 2.0 port. For desktop users adding an extra monitor via USB connection is
easier than ever without having to open the computer chassis to install an internal video
card. Once the installation is done, the USB-attached monitor soon wakes up. No function
key hassle to swap a second monitor.
With ENMUV-2, you can enjoy many benefits brought by an add-on monitor. The most
obvious one is that you get more desktop area to have more applications visible at one time.
For example, you may work on one monitor while your family watching video on the other.
No more stacking windows within the confines of a single display. Or you may span an
application, e.g. spreadsheets, across two sides of displays. What’s more, the ENMUV-2 is
hot pluggable. If you are not using the extra monitor, just unplug the ENMUV-2 at any time;
no reboot needed.
System performance is an important issue when using multiple monitors. Another benefit of
ENMUV-2 is that it uses little computer resource; ensuring users get quality display without
comprising computer performance.

Features and Benefits
Easy to Install – No Need to Open Computer Cases
Add-on monitor, LCD or projector through a single USB 2.0 port
Hot-plug ; add or remove monitor without system reboot
Small in size, works with all VGA / DVI-I displays.
Supports Video Resolution up to 1920x1080
Makes Multi-tasking Easier – ideal for users who work with multiple programs and
windows at the same time
Extend and Mirror mode support
Resumes from hibernation and suspend modes
Connects up to 6 Additional Monitors
Cost Effective Digital Signage Solution Ready – when used in conjunction with
USB-over-Network Server (sold separately) and connected to a local area network
Notes:
1. Each monitor needs an individual ENMUV-2 and an USB port. A powered USB hub is required when the
onboard USB ports run out.
2. USB-over-Network Server (ENNUS1) is sold separately. Each location requires one ENNUS1. When there
is more than one monitor at a single location, an external USB hub is required.
3. USB-over-Network Server (ENNUS1) needs to be connected to a local area network. Here is a simple
connection sequence at each location: Monitor (Digital Signage) -> ENMUV-2 -> ENNUS1 -> CAT-5
network cables -> Wireless/Wired Ethernet Router -> Computer.
Specification
Video output VGA HDDE 15pin Female Connector
DVI-I HDDE 29pin Female Connector
Supported Resolutions
640x480,
800x600,
1024x768,
1280x720,
1280x768,
1280x800,
1280x1024,
1366x768,

1400x1050,
1600x1200,
1680x1050,
1920x1080,
Device Interface USB 2.0
Host upstream link USB Mini-B Type Female Connector
Power Mode Bus-powered
Power Consumption 430mA
Number of Additional Monitors Up to 6
(Each monitor needs an individual ENMUV-2 and a USB port)
RAM 8M x 16 DDR Synchronous DRAM (SDRAM)
Dimensions 84.5 (L) x 55.5 (W) x18 (H) mm
Operating System Support Windows®7 / XP(SP2) / 2000(SP4); Windows Vista®(SP1)
Supported Modes Extended(Default), Mirrored, Primary Display
Supported colors 16 Bits and 32 Bits
Certification FCC, CE, RoHS
Application

System Requirements
Operating System: Windows® 7 / XP(SP2) / 2000(SP4); Windows Vista® (SP1)
Minimum CPU: Intel Pentium® / Celeron® 1.2GHz;AMD K6® / Athlon™ / Duron™
1.2GHz; or higher
Recommended CPU for Watching Video: dual core CPU at 2.0 GHz or faster
512MB RAM for single monitor; 1GB RAM or more for multiple monitors
1 x USB 2.0 port for each USB Video Adapter
30MB free disk space
Package Contents
ENMUV-2 External USB Video Adapter (DVI/VGA)
USB Cable
DVI to VGA adapter Connector
Quick Installation Guide
Driver CD (Driver Utility and User Manual)
※ The specifications and picture are subject to change without prior notice! Please refer to the directions in product package