Encore Enucr-U3 User manual

Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ fromthat depicted herein.
All trademarks and brand names are the properties of their respective holders.
© 2012 Encore Electronics, Inc.

1
www.encore-usa.com
Introduce
Encore’s ENUCR-U3 is a SuperSpeed USB 3.0 Card Reader. It is a perfect solution
for high resolution images, HD videos, music and any files transferring with the USB
3.0 interface up to 10x faster than USB 2.0 card readers. The ENUCR-U3 contains a
total of 7 slots: 2 micro SD, 2 SD/SDXC/MMC, 1 MS PRO/MSHG/MSXC, 1 M2 and 1
CF. It is also backwards compatible with USB 2.0 / USB 1.1 interface.
Delivery content
• ENUCR-U3 Card reader
• User Manual
Operation
1. Insert the memory card(s) into the corresponding slot with the correct orientation of
the ENUCR-U3. Look at the illustration printed on the housing of the card reader.
The card reader or the card may be damaged if the card is not inserted in
the correct orientation.
The MS PRO/MSHG/MSXC and the M2 slots cannot be used at the same time.
Use only one of them at a time. The same applies to SD/SDXC/MMC 4.2 I and
micro SD I, SD/SDXC/MMC4.2 II and micro SD II as well.
2. Turn your computer on and wait until the operating system has completely booted up.
3. Plug the ENUCR-U3 into an available USB port on your computer.
4. The new Removable Disks will appear on your computer. Follow the operating
instructions for your operating system to read and write the memory card(s).
Support card type
1) SD / SDHC / SDXC / EXTREME SD / EXTREME II SD / EXTREME III SD /
ULTRA SD / ULTRA II SD / ULTRA II / SD P PLUS / SD-ULTRA-X /
ULTRA SPEED SD / SD PRO / SD ELITE PRO / HS SD / MMC / MMC 4.0 /
HS MMC / HS RS MMC / RS MMC / RS MMC 4.0
2) MSXC / MSHG / MS Pro duo / MS MG Pro / MS MG Pro duo / HS MS MG Pro Duo /
HS MS Pro duo
3) CF I / CF 3.0 / CF4.0 / EXTREME III CF / EXTREME CF / ULTRA II CF / HS CF /
XS-XS CF / CF ELITE PRO / CF PRO
4) Micro SD / Micro SDHC / Micro SDXC
5) M2
** Some memory card formats may require special adapters to be inserted properly. **
System requirements
Windows® Server 2003 / XP / Vista / 7, Mac OS® 10.5 or later
Product specifications, size, and shape are subject to change without notice,
and actual product appearance may differ from that depicted herein.
All trademarks and brand names are the properties of their respective holders.
© 2012 Encore Electronics, Inc. All rights reserved.