Encore ENCA-CCDP User manual
ENCA-CCDP
All Weather Color CCD Security Camera
With Night Vision
PAL TV System
USER MANUAL and SPECIFICATION
ENCA-CCDP
All Weather CCD Security Camera with Night Vision
www.encore-usa.com
INTRODUCTION:
Encore’s ENCA-CCDP “All Weather Color CCD Security Camera with Night Vision” is a
high quality indoor and outdoor camera for your Surveillance DVR Setup Box. Safe to
place outdoor on any weather type, it features water and lightning proof for longer safer
outdoor camera. It uses a 1/4“ SONY High Resolution Super HAD CCD image sensor for
superior video quality. It is equipped with 24 Infra Red LED’s for clear and crisp night
vision video recording. It perfectly fits our Encore ENXDVR-4C Video Surveillance DVR
setup box.
SPECIFICATION:
SPECIFICATION VALUE
ImageSensor 1/4"SONYCCD
NumberofPixels 500(H)x582(V)
SensingArea 2.7mmx3.6mm
Lens 3.6mmM12Lens(Optional)
Sync.System Internal
Resolution 420TVLines
ElectronicsShutter 1/50‐1/100,000sec
MinimumIllumination 1.0Lux/F1.2,0Lux(IRon)
Lens 3.6mm
AngleView 90°
MiniFocalDistance 20cm
AGC Built‐in
WhiteBalance Auto
GammaModification 0.45
GainControl Auto
S/NRatio 48dB(AGCOff)
ElctronicShutterAuto,1/50(1/60)‐1/100,000sec
VideoOutput 20mA(IROff),400mA(IROn)
IRLED 24UnitsInfraredLED(
φ
5mm/850mm)
IRDistanceInEffect 20Meter(Indoor)/15Meter(outdoor)
IRIllumination 3Lux
EnvironmentalResistance 1P66(Waterproof)
OperatingTemperature ‐4°F~122°F('‐20Ԩto50Ԩ)
PowerConsumption 12VDC/200mA(IROn400mA)
Weight280g
Certifications&Regulations FCC,CE,RoHS
ENCA-CCDP
All Weather CCD Security Camera with Night Vision
www.encore-usa.com
DIMENSION:
Installation Precautions
•Do not place the camera where there is an extreme temperature condition. Mak
sure to place the camera where the temperature is within the -4°F to122°F (-20℃
to 50℃) limit only.
e
ng
ge.
•Do not install the camera where there is a constant lighting change. Severe light
with constant lighting changes can cause the camera to work improperly causi
video problems.
•Do install the camera to a very high humid place. It can cause poor quality ima
Do•not disassemble the camera. There are no user serviceable parts inside.
Opening the camera housing exposes you to a high and dangerous voltage and
other hazards. Refer all servicing to a qualified technician only.
Do•not touch the imaging surface of the sensor. Use only a proper cleaning
solutions and materials. Touching or cleaning the sensor using improper cleaning
solutions may damage the camera sensor permanently.
The•package does not come with a power adapter. Make sure that the power
supply voltage is correct before operating the unit. The voltage requirement is 12
Volts DC. Check your DVR user manual for the power supply unit.
Do•not focus the camera while in operation to any extreme light, like directly to the
sun, laser light, etc.
ENCA-CCDP
All Weather CCD Security Camera with Night Vision
www.encore-usa.com
ENCA-CCDP
All Weather CCD Security Camera with Night Vision
www.encore-usa.com
CONNECTION DIAGRAM:
1. Connect the RCA video cable to your surveillance DVR’s Video-in port, your RCA
2. Connect the power input jack to your DVR Setup Box. Check your DVR user
ires
ACKAGE CONTENTS: camera
video input cable connector must be in the Male form. Check your DVR User
Manual on how to connect security cameras to your DVR device. Some DVR
setup box requires adapter connectors or sometimes called Balun to be able to
use to their DVR Setup Box.
manual for the camera power supply and connection. Most DVR Setup Box
comes with multi-connector power adapter intended for cameras. Some requ
adapter or Balun to power the cameras.
P
•One CCD Security
•Three screws with anchors
•One Ball head camera stand
•User Manual / Specifications
Other Encore Security Camera manuals
