Endura DVR5100 Series User manual

C1695 / REVISED 7-07
International Standards
Organization Registered Firm;
ISO 9001 Quality System
PRODUCT SPECIFICATION
control site
DVR5100 Series Digital Video Recorder
4/8/16 CAMERA INPUTS, 250 GB-1.5 TB STORAGE, ENDURA ENABLED
™
Product Features
•4, 8, or 16 Video Inputs
•Embedded Linux
®
Operating System
•Record Video at up to 480/400 ips (NTSC/PAL) at CIF, 2CIF, or 4CIF
Resolution, Programmable on a Per-Input Basis
•MPEG4-Based Compression Optimized for Surveillance
Requirements
•Continuous, Scheduled, Motion, Alarm and/or Event Recording
•Up to 1.5 TB of Internal Storage Including EnduraStor
™
Optimization
•DVR Operation from Front Panel Controls, USB Keyboard, KBD5000,
or Remote Client
•DVR Configuration and Programming Through Standard USB
Keyboard and Mouse, Front Panel Controls, KBD5000, or Remote
Client
•Operating System on Compact Flash and Engineered Hard Drive
Cooling System for Enhanced Reliability
•Remote Client Application for Live Monitoring of One or More
Cameras, Full Search and Playback, Remote Export of Video, and
Remote Administration and Configuration
•Digital Video Authentication
•PTZ Control Using Coaxitron
®
, Pelco D, or Pelco P Protocols
•Full System Diagnostics Monitoring and Logging
•Single Button Export for Fast, Intuitive Video Export
KBD5000
NETWORK
16 CAMERA VIEWS
REMOTE CLIENT
IMPORTANT NOTE: PLEASE READ. The network implementation is shown as a general
representation only and is not intended to show a detailed network topology. Your actual network
will differ, requiring changes or perhaps additional network equipment to accommodate the system
as illustrated. Please contact your local Pelco representative to discuss your specific requirements.
As shown above, one DVR5100 Remote Client application can access one DVR at a time. Each
DVR5100 can support up to five simultaneous remote client connections.
C1695_DVR5100 7-07.fm Page 641 Friday, October 5, 2007 1:38 PM

PRODUCT OVERVIEW
The
DVR5100
is the first product from Pelco to be Endura Enabled
™
.
Endura Enabled means the product delivers features and benefits
from the Endura
®
digital video surveillance platform for stand-alone
operation. Further, it denotes the ability of the product to work in an
Endura system. The
DVR5100
digital video recorder leverages
Endura technologies to deliver superior recording performance and
video quality along with intuitive, easy operation. The
DVR5100
captures unparalleled video quality at CIF, 2CIF, and 4CIF resolution at
up to 480/400 (NTSC/PAL) images per second (ips). The DVR5100 can
be integrated with an Endura network with a future software
release.
The
DVR5100's
remarkable performance is enhanced by the use of
EnduraStor
™
storage optimization technology. EnduraStor allows
video recorded at higher frame rates to be automatically reduced to
a lower frame rate after a preconfigured period of time, saving
valuable hard disk drive space. Further, the use of new recording
frame rate and resolution options, in conjunction with EnduraStor,
provides the benefit of having 30/25 ips video available for the
duration of the EnduraStor delay period, while still meeting video
retention targets achievable with time lapse recording. EnduraStor,
combined with built-in video motion detection capabilities and
programmable recording schedules, allows the user to harness the
performance of the
DVR5100
while optimizing the required storage
capacity and cost.
The included USB keyboard and mouse can be connected to the
DVR5100’s
USB ports to configure settings quickly and easily, saving
valuable time and expense in installing and programming the DVR.
Convenient front panel controls with integrated joystick, jog, and
shuttle, combined with an intuitive and simple icon-based user
interface (UI), make using the DVR effortless. For users that prefer to
operate the DVR from a USB keyboard, the supplied keyboard template
calls attention to the convenient hot keys available for operation. The
DVR5100 provides integrated operation of Pelco pan/tilt/zoom (PTZ)
cameras through Coaxitron
®
, Pelco D, or Pelco P protocols. An
innovative single-button export feature simplifies the exporting of
video.
Flexible viewing options allow users to optimize the DVR for their
particular application requirements. Video can be displayed on VGA,
NTSC/PAL composite, or S-Video monitors. The main monitor can
display one, four, nine, or sixteen images. Users can independently
view live and playback video on the same screen. In addition, a
programmable spot monitor provides a live sequencing display on a
composite monitor for use as either a call monitor or public view
display.
The
DVR5100
uses internet protocol-based networking for remote
accessibility and control of the DVR. All connections are made over a
secure VPN session. Bandwidth throttling is supported on a per-
connection basis, enabling up to five users to optimize their
experience with the
DVR5100
based on their available network
bandwidth.
The powerful remote client offers the ability to view and control all
cameras from one
DVR5100
using a convenient drag and drop
approach. Video can be searched based on time, date, camera,
motion, and events and designated clips can be exported to the
remote PC. The DVR5100 can be fully administered from the remote
client. Further, the remote client can be utilized for more
sophisticated configuration options. For example, users can group
multiple alarms and motion triggers into Events which can be
effective in eliminating false alarms. Finally, the remote client can be
used to create scripts to orchestrate the DVR's response to alarm,
event, or user triggers.
Optimized to capture high quality video with a maximum recording
speed of 480/400 images (NTSC/PAL) at CIF, 2CIF, and 4CIF
resolution, the
DVR5100
shatters previous performance marks for
mainstream DVRs. The combination of enterprise class recording
capabilities, ample internal storage, remote accessibility, and the
reliability and assurance found in Pelco products makes this the ideal
DVR for mainstream video surveillance applications.
C1695_DVR5100 7-07.fm Page 642 Friday, October 5, 2007 1:38 PM

TECHNICAL SPECIFICATIONS
SYSTEM
Operating System Linux
User Interface Semitransparent on-screen icon-based
overlays
VIDEO
Video Standards
Input NTSC/PAL composite
Output NTSC/PAL S-Video, composite
VGA (1024 x 768)
60 Hz capability for NTSC
75 Hz capability for PAL
Video Encoding MPEG-4
Video Inputs 4/8/16
Video Resolutions Format NTSC PAL
4CIF 704 x 480 704 x 576
2CIF 704 x 240 704 x 288
CIF 352 x 240 352 x 288
Video Recording Rate
Video Inputs/Connectors 4/8/16, BNC, looping, 75 ohms,
0.5–1 Vp-p
Video Termination Hi-Z, 75 ohms, software controlled
Video Display Speed Up to 180 CIF resolution ips.
(Main Monitor) Video recorded at slower frame rates will
display at the slower frame rate in live
display.
Video Display Modes Full screen, 2 x 2, 3 x 3, and 4 x 4
(Main Monitor)
Video Display Speed 30 ips
(Sequence Monitor)
Video Display Modes Full screen
(Sequence Monitor)
Video Outputs 1 BNC, NTSC/PAL, 75 ohms, 1 Vp-p
1 S-Video, NTSC/PAL
1 VGA
1 BNC, NTSC/PAL Spot Monitor
AUDIO
Audio Decoding G.711 speech codec
Audio Bit Rate 64 kbps
Audio Levels
Input Line-level input
Output Line-level output
Audio Connectors 3.5 mm monaural jacks:
Audio Inputs 2 for 4- and 8-channel models;
4 for 16-channel models
Audio Outputs 1
PTZ CONTROL
PTZ Interface Front panel, USB keyboard, KBD5000, or
through remote client
PTZ Protocols Pelco D, Pelco P, and Coaxitron
ALARM/RELAYS
Alarm Inputs 1 per camera, programmable, 5.0 VDC,
10 kohms, triggered, supervised/
unsupervised
Relay Outputs
4 or 8 channels 2 relays, N.O./N.C., form-C relay, 30 VDC, 1 A
16 channels 4 relays, N.O./N.C., form-C relay, 30 VDC,1 A
NETWORK
Interface Ethernet RJ-45 port (1000BaseT to
10/100/1000 Mbps)
AUXILIARY INTERFACE
USB 2.0 1 high-speed USB 2.0 port on the front panel
2 high-speed USB 2.0 ports on the rear panel
RS-422 1 RS-422 port, programmable baud rate up to
19200
FRONT PANEL INDICATORS/FUNCTIONS
Indicators
Power Blue
HDD Activity Yellow
Network Activity Green
Network Status Green, amber, red
Unit Status Green, amber, red
Buttons Configuration/reset
Power
POWER
Power Input 100-240 VAC, 50/60 Hz, autoranging
Power Supply Internal
Power Consumption 136 W, 465 BTU/H (maximum)
Cable Type
USA Standard 117 VAC, 3 prongs, 6 ft or 1.8 m
European Standard 220 VAC, 3 prongs, molded connector,
6 ft or 1.8 m
UK Standard 250 VAC, 3 prongs, molded connector,
6 ft or 1.8 m
ENVIRONMENTAL
Operating Temperature 50° to 95°F (10° to 35°C)
Storage Temperature -40° to 149°F (-40° to 65°C)
Operating Humidity 20% to 80%, noncondensing
Maximum Humidity Gradient 10% per hour
Operating Altitude -50 ft to 10,000 ft (-16 m to 3,048 m)
Operating Vibration 0.25G at 3 Hz to 200 Hz at a sweep rate of
0.5 octave/minimum
Resolution
Normal
Recording Rates EnduraStor
™
Rates
4CIF
NTSC
6, 10, 15, and 30 ips 5*, 3*, 2, 1* ips,
1 image/2 seconds*
1 image/3 seconds*
1 image/5 seconds*
PAL
5, 8.3, 12.5, 25 ips
2CIF
NTSC
6, 10, 15, and 30 ips 5*, 3*, 2, 1* ips,
1 image/2 seconds*
1 image/3 seconds*
PAL
5, 8.3, 12.5, 25 ips
CIF
NTSC
6, 10, 15, and 30 ips 5*, 3*, 2, 1* ips,
1 image/2 seconds*
1 image/3 seconds*
PAL
5, 8.3, 12.5, 25 ips
*Designated EnduraStor rates are recorded at 30/25 ips unless EnduraStor
is enabled, at which point recorded video is pruned to the designated
image rate.
C1695_DVR5100 7-07.fm Page 643 Friday, October 5, 2007 1:38 PM

Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
Tel: (800) 289-9100 • FAX (800) 289-9150
International
Tel: (559) 292-1981 • FAX (559) 348-1120
www.pelco.com
TECHNICAL SPECIFICATIONS
PHYSICAL
Construction Steel cabinet
Finish Front panel: gray metallic with black end caps
Chassis: black matte finish
Dimensions 17.0" D x 17.1" W x 3.5" H
(43.2 x 43.4 x 8.9 cm)
Mounting Desktop (feet) or rack, rack mount kit included
2 RU per unit
Unit Weight 28.8 lb (13.06 kg)
Shipping Weight 38 lb (17.24 kg)
REMOTE CLIENT SPECIFICATIONS
Processor
Minimum 2.4 GHz Pentium
®
IV
Optimum 3.2 GHz Pentium IV
System Memory
Minimum 512 MB RAM memory
Optimum 1 GB RAM memory
VGA Card AGP VGA card with 128 MB RAM and
DirectX
®
8.1 or later hardware acceleration
with support for 1280 x 1024 resolution
monitors
Monitor VGA monitor with 1280 x 1024 display
resolution
Operating System Windows
®
XP Professional, SP2 only
MODEL NUMBERS
SUPPLIED ACCESSORIES
Power Cables 1 USA standard, 1 European standard, 1 UK
standard
Resource CD Contains DVR5100 remote client software
and manuals
Recovery DVD Contains DVR5100 server boot image for
emergency recovery
Rack Mounting Kit 1
USB keyboard/template Used for configuration and operation
USB mouse Used for configuration only
USB keyboard and mouse make configuration more efficient. USB keyboard
can also be used for operation.
OPTIONAL ACCESSORIES
KBD5000 USB keyboard with joystick, jog shuttle, and
keypad modules can be used for control and
programming.
CERTIFICATIONS
• CE, Class B
• UL Listed
• UL Listed to Canadian safety standards
• FCC, Class B
• C-Tick
At the time of this printing, all other certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most recent
B.O.S.S
®
update for the current status of certifications.
STANDARDS/ORGANIZATIONS
• Pelco is a member of the MPEG-4 Industry Forum.
• Pelco is a member of the Universal Plug and Play (UPnP) Forum.
• Pelco is a member of the Universal Serial Bus (USB) Implementers Forum.
• Pelco is a contributor to the International Standards for Organization/
Electrotechnical Commission (ISO/IEC) Joint Technical Committee 1
(JTC1), “Information Technology,” Subcommittee 29, Working Group 11.
• Compliant with ISO/IEC 14496 standard (also known as MPEG-4).
• Compliant with International Telecommunication Union (ITU)
Recommendation G.711, “Pulse Code Modulations (PCM) of Voice
Frequencies.”
Model
Camera
Inputs
Hard Drive
Space (GB)
Optical
Drive
DVR5104DVD-250 4 250 DVD
DVR5104DVD-500 4 500 DVD
DVR5104DVD-800 4 800 DVD
DVR5104DVD-1000 4 1000 DVD
DVR5104DVD-1500 4 1500 DVD
DVR5108DVD-250 8 250 DVD
DVR5108DVD-500 8 500 DVD
DVR5108DVD-800 8 800 DVD
DVR5108DVD-1000 8 1000 DVD
DVR5108DVD-1500 8 1500 DVD
DVR5116DVD-250 16 250 DVD
DVR5116DVD-500 16 500 DVD
DVR5116DVD-800 16 800 DVD
DVR5116DVD-1000 16 1000 DVD
DVR5116DVD-1500 16 1500 DVD
Pelco, the Pelco logo, Coaxitron, Endura, and B.O.S.S. are registered trademarks of Pelco.
Endura Enabled, EnduraStor, and TruImage are trademarks of Pelco.
Direct X and Windows are registered trademarks of Microsoft Corporation.
Pentium is a registered trademark of Intel Corporation.
Linux is a registered trademark of Linus Torvalds.
Specifications subject to change without notice.
©Copyright 2007, Pelco. All rights reserved.
Notice: Judgment as to the suitability of the products for users’ purposes is solely the
users’ responsibility. Users should refer to the Operation manuals for cautionary
statements regarding user selected options and how they might affect video quality.
Users shall determine the suitability of the products for their own intended application,
picture rate and picture quality. In the event users intend to use the video for
evidentiary purposes in a judicial proceeding or otherwise, users should consult with
their attorney regarding any particular requirements for such use.
C1695_DVR5100 7-07.fm Page 644 Friday, October 5, 2007 1:38 PM
This manual suits for next models
15
Table of contents
Other Endura DVR manuals